Znaleziono w kategoriach:
Radio JVC RA-E611B Czarny

Instrukcja obsługi Radio JVC RA-E611B Czarny

Powrót
DAB+/FM Digital Radio
RA-E611B-DAB / RA-E611W-DAB
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
Thank you for buying our product.
Please read through these operating instructions, so you will know how to operate your
equipment properly. After you finished reading the instructions manual, put it away in a safe
place for future reference.
SAFETY
General
Do not drop the device and do not expose it to liquid, moisture or humidity. These might lead
to damage to the device.
If the device is moved from a cold environment into a warmer one, do let it adapt to the new
temperature before operate the device. Otherwise, it might lead to condensation and cause
malfunctions in the device.
Do not use the device in the dust environment as dust can damage the interior electronic
components and lead to malfunctions in the device.
Protect the device from strong vibrations and place it on stable surfaces.
Do not attempt to disassembly the device.
If the device is not using for a long period of time, disconnect it from the power supply by
unplugging the power plug. This is to avoid the risk of fire.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To maintain the compliance with the WiFi RF exposure requirement, place the product at
least 20 cm from nearby persons except when operating the controls.
Power adapter
Only use the power adaptor delivered with the device.
The socket outlet should be installed near the device and should be easily accessible.
Never touch the power plug with wet hands and never pull on the power cable when pulling
the plug out of the power socket.
Make sure the electrical voltage specified on the device and its power plug is corresponding
to the voltage of the power socket. Incorrect voltage will destroy the device.
Risks associated with high volumes
Connect headphones with volume set low and increase it if required. Prolonged
listening through some headphones at high volume settings can result in hearing
damage. To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Battery handling and usage
Only adults should handle battery. Do not allow a child to use this apparatus unless the
battery cover is securely attached.
Remove batteries if exhausted or if they will not be used again for a long period. The
incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or
cause the batteries to burst, therefore:
- Do not mix battery types, e.g. alkaline with zinc carbonate.
- When inserting new batteries, replace all batteries at the same time.
Batteries contain chemical substances, so they should be disposed of properly.
EN
PRODUCT OVERVIEW AND CONTROL BUTTONS
1. PRESET buttons
2. ALARM button
3. ▼ button
4. ▲ button
5. SELECT button
6. Display
7. STANDBY button
8. MODE button
9. MENU/INFO button
10. DIMMER/SNOOZE button
11. VOLUME knob
12. Battery compartment
13. Antenna
14. Headphone output
15. DC IN socket
EN
GETTING STARTED
POWER SOURCE
Mains Power
Connecting the unit to any other power source may cause damage the unit. Unwind the
mains adapter cable to its full length. Connect the end of the cable to the DC IN socket at
the rear of the unit and then connect the mains adapter to the mains socket. Make sure the
mains adapter is firmly inserted into the mains socket. The unit is now ready to use.
To switch the unit off completely, unplug the mains adapter from the mains socket.
Battery Power
Insert 4 x 1,5V AA batteries (not included) correctly by following the polarity (+ or –) indications
in the battery compartment.
NOTE: When the batteries become weak, the display will show <Battery Low>. The batteries should be
replaced. When the batteries are completely exhausted, the power is turned off.
BASIC OPERATION
Powering ON/OFF
After connecting the mains adapter to the unit and the mains socket, the unit will enter Standby
mode.
Press the STANDBY button to switch on the unit.
Press the STANDBY button again to switch the unit back to Standby mode.
Disconnect the power cable of the mains adapter from the mains socket if you want to
switch the unit off completely.
Display Backlight (Mains Power only)
There are four backlight levels (High, Medium, Low, O󰀨) to choose from. To set the backlight
level, repeatedly press the DIMMER/SNOOZE button and the brightness of the display will
change.
Volume
Rotate the VOLUME knob to adjust the volume.
Mode selection
Press MODE button button to select the desired source.
NOTE: DAB+ and FM stations will only be available separately when BestTuneTM is set to Off.
PRESETS
You can store up to 30 of your favorite DAB or FM stations to the memory. This will enable you
to access your favorite stations quickly and easily. To store a preset, you must rst be listening
to the station that you would like to save.
Storing to Presets 1-7
Press and hold the PRESET 1-7 buttons.
The words <Preset # saved> will show on the display.
Storing to Presets 1-30
Press and hold the PRESET 8+ button, and then press the ▲ / ▼ buttons to select the
preset station number to save. Press the SELECT button to confirm selection.
The words <Preset # saved> will show on the display.
Recalling Presets 1-7
Press the PRESET 1-7 buttons.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 40 618 750 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756