Znaleziono w kategoriach:
Hulajnoga wyczynowa NILS EXTREME HS155 Złoty

Instrukcja obsługi Hulajnoga wyczynowa NILS EXTREME HS155 Złoty

Wróć
HS155
4. Manual instruction EN
6. Instrukcja obsługi PL
8. Návod k obsluze CZ
10. Manuel instruktion DA
12. Gebrauchsanweisung DE
14. Manual de instrucciones ES
16. Käsijuhend ET
18. Manuel d'instruction FR
20. Kézi utasítás HU
22. Manuale di istruzioni IT
24. Naudojimo instrukcijos LT
26. Rokasgrāmatas instrukcija LV
28. Handmatige instructie NL
30. Manual de instruções PT
32. Instrucțiuni manuale RO
34. Návod na obsluhu SK
36. Navodila za uporabo SL
38. Instruktionsbok SV
40. Інструкція з експлуатації UK
A.
B. C. D.
1.
2. 3.
4.
3
USER MANUAL
1. Product purpose
The scooter is a piece of sports equipment intended for amateur use. The product is not intended for professional sports use,
extreme use or advanced stunts.
2. Safety
Before riding, familiarise yourself with riding techniques and braking methods. Riding a scooter requires special skills and caution.
General recommendations:
•
Always adjust your speed to your skills.
•
Only use the scooter on smooth, clean and dry surfaces.
•
Avoid riding on steep, slippery, dusty, rocky or wet surfaces.
•
Avoid sudden overloads and dynamic manoeuvres — they can lead to loss of control.
•
Avoid riding after dark and in adverse weather conditions.
•
Do not modify the scooter — this may compromise safety.
•
Always obey traffic regulations, give way to pedestrians and exercise caution.
•
Maximum user weight: 100 kg.
Riding safety
•
Check the technical condition of the scooter before each ride
•
Always wear a helmet and knee, elbow and wrist pads — they protect against injuries.
•
Use reflective elements and lights, especially after dark or in poor visibility.
•
Only ride on smooth, dry surfaces. Avoid steep, slippery and dusty areas.
•
Do not use your mobile phone or headphones while riding.
•
Watch out for pedestrians and obey traffic regulations.
•
Children should only ride under adult supervision.
Protective clothing and equipment:
•
It is recommended to wear a helmet, protective gear and reflective elements.
•
Wear appropriate protective clothing and sports footwear.
3. Assembly Kit
Contents:
•
Deck with wheels and rear wheel brake.
•
Handlebar with front bar.
Assembly instructions:
1. Check the contents of the kit against the assembly diagram (1. A, B, C and D).
2. Slide the clamp (C) onto the tube at the bottom of the handlebar (A).
3. Insert the lower end of the handlebar (A) with the clamp (C) attached into the hole in the front of the deck (B).
4. Ensure that the handlebars are straight and stable.
5. Tighten the clamp with four screws (D) using an Allen key.
6. Tighten the screws evenly, starting with the outer ones and ending with the inner ones, to ensure stability.
7. Check that all bolts are tightened securely and that the steering wheel has no play.
4. Steering and braking
Steering:
•
Before riding, check the steering mechanism and make sure that the front wheel is facing in the right direction in
relation to the direction of travel (see graphic 4 for inspiration).
•
The T-shaped handlebars are used to maintain balance and turn.
•
To turn: turn the handlebars in the desired direction.
Braking:
•
To stop, press your heel on the brake above the rear wheel.
•
After heavy braking, the brake may be hot — do not touch it.
5. Wheels and bearings
Wheels:
•
Polyurethane wheels with a diameter of 110 mm provide good control and manoeuvrability, especially on smooth
surfaces.
•
High abrasion resistance and good damping properties.
•
The degree of wear depends on driving style, surface, user weight and weather conditions.
•
New wheels require running in — their smoothness improves after being loaded.
•
If the wheels do not roll smoothly while riding, check that the screws are not too tight.
EN
4
ABEC 7 bearings:
•
Pre-lubricated — no lubrication required.
•
They ensure smooth riding with the right load.
•
Avoid riding on wet, greasy or dusty surfaces.
•
Wet bearings should be dried with a clean cloth.
•
Replace worn bearings.
Replacing bearings:
1. Remove the wheels.
2. Remove the first bearing using a suitable tool.
3. Pull out the sleeve and the second bearing.
4. Clean or replace the bearings.
5. Insert the first bearing into the wheel.
6. Insert the sleeve and the second bearing.
Maintenance:
•
Check the condition of the wheels regularly — cracks, deformations or excessive tread wear can affect
safety.
•
Clean the wheels and bearings of dust and sand — preferably with a dry cloth or compressed air.
•
Do not use lubricants on the surface of the wheels — they may reduce traction.
•
Replace the wheels when:
oThe diameter has decreased
oCracks or deformations are visible
oThe bearings do not rotate smoothly despite cleaning.
6. Maintenance and storage
Regular maintenance increases riding safety and extends the life of your scooter.
After each ride:
•
Thoroughly clean and dry the scooter.
•
Remove small stones and other debris from the structural components.
•
Store the scooter in a dry place.
Regular checks:
•
Check the technical condition of the scooter, especially the wheels, bearings, axles and screws.
•
Ensure that all screws are tightened securely.
•
In the event of a fault/breakage, discontinue use immediately.
•
Replace worn parts — they are not covered by warranty.
7. Technical data
Parameter
Value
Frame material
Steel / Aluminium
Bearings
ABEC 7
Handle
TPR
Deck dimensions
50 cm × 11 cm
Wheels
11 cm × 2.4 cm
Wheel material
PU
Dimensions
69 cm × 46 cm × 80 cm
Maximum user weight
100 kg
8. Compliance with standards
The product complies with the requirements of EN 14619:2019.
Information about responsible entities
Manufacturer: ABISAL Sp. z o.o. ul. Pyskowicka 17 41-807 Zabrze, Poland
Distributor: ABISTORE SPORT s.r.o. U Cihelny 230/3 74801 Hlučín, Czech Republic
EN
5
Aplikacja mobilna Media Expert

Pobierz naszą aplikację i kupuj jeszcze taniej

Pobierz aplikację mobilną Media Expert

Kod qr pobierz aplikację mobilną Media Expert
Pobierz z Google Play
Pobierz z App Store

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 687 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756