Znaleziono w kategoriach:
Portable air conditioner
Tragbare Klimaanlage
Klimatyzator przenośny
SAC31
Owner’s manual
Bedienungsanleitung
Instrukcja obsługi
SAC31
Diagram 1
Diagram 2
Diagram 3
IMPORTANT NOTES:
źStore the device in a room where there are no permanent re (e.g.
operating gas equipment) and ignition sources (e.g. operating electric
heater).
źDo not pierce or expose to re.
źAny person involved in servicing or working on a refrigerant circuit
should have a current valid certicate issued by an accredited
organisation that conrms their qualications regarding the safe
handling of refrigerants according to requirements. Servicing works
must be performed only according to the device manufacturer's
guidelines.
źStore the device in a way that prevents mechanical damage.
źMaintenance or repair works that require the assistance of other
trained personnel should be performed under the supervision
of a person competent in the use of ammable refrigerants.
SAC31
3
SAC31
źBefore performing any works on circuits containing ammable
refrigerants, it is essential to perform a safety inspection to minimise
ignition risks. Works should be performed according to a control
procedure to minimise the risk of ammable gas or vapours being
present during the works. All maintenance personnel and other
persons working in the vicinity must be instructed in the nature
of the work. Avoid working in conned spaces. Isolate the area
around the workplace. Ensure that the area has been inspected
by means of the control of ammable materials.
źRefrigerant may be odourless.
źThe device contains a determined amount (in grams) of R290
refrigerant (see the nameplate).
źR290 is a refrigerant that meets the requirements of the European
directives concerning environmental protection.
źWhen installing, operating or storing the device in a place without
adequate ventilation, the room must be designed in such a way that
no refrigerant will accumulate (in case of leakage). Refrigerant
accumulation can cause a re or explosion due to the presence
of electric heaters, stoves or other sources of ignition.
źEquipment symbol designation: see local regulations.
źDisposal of equipment containing ammable refrigerant: see
national regulations.
źStorage of packed (unsold) equipment: The protective packaging
of stored equipment should prevent the refrigerant from leaking
in case of mechanical damage to the equipment. The maximum
number of items of equipment to be stored together is specied
in local regulations.
źDo not pierce any element of the refrigerant circuit.
źTransport of equipment containing ammable refrigerant: see
transport regulations.
źEquipment/devices storage: store in compliance with the
manufacturer's guidelines.
4
SAC31
źBefore using this device read the instruction manual and follow the
instructions inside. The manufacturer is not liable for any damages
caused by the misuse of this device due to inappropriate handling.
Please keep this manual for future reference.
źTo achieve the utmost in enjoyment and performance, and in order
to become familiar with its features, please read this manual
carefully before attempting to operate this product.
źThis device is for domestic use only. Do not use for any other
purposes.
źThe device should only be connected to an earthed socket with
values corresponding to the values on the rating label.
źIt is necessary to check, if total current consumption of all devices
plugged into the wall outlet does not exceed the fuse in the circuit.
źIf you are using an extension cord, make sure that the total power
consumption of the equipment plugged into the extension cord
does not exceed the extension cord power rating. Extension cords
should be arranged in such a way as to avoid tripping hazards.
źMake sure the cable is grounded, 3-cores with a socket
and an earth cable.
źDo not let cord hang over edge of counter, or touch any hot surface.
źBefore maintenance work always disconnect the unit from the
power supply.
źThe device is not designed to be controlled via an external timer,
separate remote control, or other equipment that can turn the
device on automatically.
źNever leave the product connected to the power source without
supervision.
źDamage to the power cord or plug can lead to an electrocution
hazard.
źNever put the power cable, the plug or the whole device into the
water or any other liquids.
źWhen unplugging the power cord from electrical outlet, hold
it by the plug only and remove the plug carefully. Never pull the
cable as it may cause damage to the plug or power cord.
5