Znaleziono w kategoriach:
Dzwonki do drzwi (19)
Wróć
3402118000_31-P5750_00_01_WEB 80 × 120 mm
www.emos.eu
P5750
GB Wireless Doorchime
CZ Bezdrátový zvonek
SK Bezdrôtový zvonček
PL Dzwonek bezprzewodowy
HU Vezeték nélküli csengő
SI Brezžični zvonec
RS|HR|BA|ME Bežično zvono
DE Drahtlose Klingel
UA Бездротовий дзвоник
RO|MD Sonerie fără r
LT Belaidis durų skambutis
LV Bezvadu durvju zvans
EE Juhtmeta uksekell
BG Безжичен звънец
FR Carillon sans l
IT Campanello senza li
ES Timbre inalámbrico
NL Draadloze deurbel
2
1
2
1
2
3
4
1
2
34
4
3
GB | Wireless Doorchime
The set consists of a doorbell button (transmitter) and a chime (receiver).
The chime is designed for constant connection to 230 V AC/50 Hz mains.
The button is battery-free. Transmission between the button and the chime
is carried via radio waves at a frequency of 433.92 MHz. The range depends
on local conditions and reaches up to 150 m in open spaces without interfer-
ence. The set features a so-called self-learning function – the button is able
to generate its own pairing code which is then received by the chime and
stored in its memory. The set can thus be expanded with additional buttons.
The self-learning function also prevents the set from aecting neighbouring
doorbells. For proper usage of the wireless doorchime, read the instruction
manual thoroughly.
Specications
Transmission range: up to 150 m in an open area (can drop down to one
fth in a busy area)
Transmission frequency: 433.92 MHz, 10 mW e.r.p. max.
Button: water resistant; IP44 enclosure rating
Pairing the chime with buttons: self-learning function
Pairing capacity: max. 8 buttons
Number of ringtones: 10
Chime power supply: 230 V AC/50 Hz
Button power supply: battery-free
Includes: double-sided adhesive tape
Chime Description
(see Fig. 1)
1 – bell LED
2 – pairing/volume setting button
3 – ringtone change
4 – speaker
Button Description
(see Fig. 2)
1 – button LED
2 – ring button
3 – hole for opening the battery cover
4 – openings for mounting onto a wall
Pairing the Button with the Chime
1. Plug the chime(s) into a socket.
2. Then, long-press the pairing button on the chime for ca. 5 seconds.
4
3. The chime LED will light up; release the button. The chime will switch
to self-learning pairing mode which lasts for 25 seconds. During this
time, press the ring button. The chime will ring and the button is now
paired with the chime. This automatically ends self-learning mode
(chime LED turns o).
4. To pair multiple buttons, repeat the process for each button from step 1.
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons for the event of a power failure. There is thus no need
to pair buttons again after a power failure.
Erasing the Memory of Paired Buttons
Press and hold the pairing button on the chime. Plug the chime into a
socket. The LED of the chime will light up after ca. 5 seconds. Release the
button. The LED will turn o. The memory of all paired buttons will be erased.
Ringtone Selection
1. Repeatedly press the or ringtone change button located on the chime.
2. Each press of the button will play a dierent ringtone. The last ringtone
played is the one that will be used.
Setting Dierent Ringtones when Using Multiple Buttons
1. Plug the chime into a socket and long-press the pairing button for
approximately 5 seconds.
2. The chime LED will light up. Release the button. The chime will switch
to self-learning pairing mode which lasts for 25 seconds.
3. Repeatedly press the ringtone change button or on the chime.
4. Each press of the button will play a dierent ringtone. The last ringtone
played is the one that will be used.
5. Press the ring button. The chime will ring.
Repeat this process for each paired button.
Setting Ringtone Volume
You can set 5 volume levels.
Repeatedly press the button on the chime. Each press changes the volume
(100 % – 75 % – 50 % – 25 % – 0 %). When set to 0 %, only the chime LED
will light up when the bell is rung.
Installing the Doorbell Button (Transmitter)
1. First, pair the button with the chime.
2. Before installation, check that the pair works reliably in the chosen spot.
3. Remove the rear cover by inserting a screwdriver into the hole on the
side of the button.
4. Use the double-sided adhesive tape (included) or two screws to x the rear
portion of the cover to the wall. Although the button is weather-resistant,
choose a location where it is protected, e.g. in a wall recess.
5
5. Re-assemble the button.
6. Press the button to ring the chime. Pressing is accompanied by ashing
of an LED, indicating the button has sent a radio signal. The chime will
play the selected ringtone and its LED will ash.
Note: The doorbell button (transmitter) can be placed on wood or brick walls
without issue. However, never place the button directly onto metal objects
or materials containing metal, such as plastic windows or doors that have a
metal frame. In such cases, the transmitter will not work properly.
Installing the Chime (Receiver)
1. The doorbell is intended for indoor use only. When running, it must be
plugged in a 230 V AC/50 Hz socket and with free space around it so that
it is always accessible.
2. The transmission range (max. 150 m) is inuenced by local conditions,
such as the number of walls through which the signal passes, metal door
frames and other elements which aect the transmission of radio signals
(presence of other radio devices operating at a similar frequency, such
as wireless thermometers, gate controls etc.). Transmission range can
decrease drastically due to these factors.
Troubleshooting
The chime does not ring:
• The chime may be out of range.
- Change the distance between the button and the chime; the range
may be aected by local conditions.
- Do not mount the button onto metal materials – reduces range. Place
the button elsewhere or use an isolating plate made of plastic or wood.
• The chime has no power.
- Make sure the chime is properly inserted in the socket and that the
power is running or the fuse/circuit breaker for the electric network
section is on.
Upkeep and Maintenance
The wireless digital doorchime is a sensitive electronic device. Therefore, it
is necessary to observe the following precautions:
• The chime (receiver) is designed for indoor use in dry environments only.
• The chime must be located in an easily accessible location for ease of
handling and unplugging.
• Periodically check the functionality of the doorbell button and replace
the battery in time.
• Do not expose the button or chime to excessive vibrations and shocks.
• Do not expose the button or chime to excessive heat and direct sunlight
or moisture.
• When cleaning the chime, unplug it from the socket.