Znaleziono w kategoriach:
Dzwonki do drzwi (19)
Wróć
3402115000_31-P5730_00_01_WEB 80 × 120 mm
www.emos.eu
P5730
GB Wireless Doorchime
CZ Bezdrátový zvonek
SK Bezdrôtový zvonček
PL Dzwonek bezprzewodowy
HU Vezeték nélküli csengő
SI Brezžični zvonec
RS|HR|BA|ME Bežično zvono
DE Drahtlose Klingel
UA Бездротовий дзвоник
RO|MD Sonerie fără r
LT Belaidis durų skambutis
LV Bezvadu durvju zvans
EE Juhtmeta uksekell
BG Безжичен звънец
FR Carillon sans l
IT Campanello senza li
ES Timbre inalámbrico
NL Draadloze deurbel
2
1
3
2
1
3 4
2
5
6
1
2
3
4
12 V
3
GB | Wireless Doorchime
The set consists of a doorbell button (transmitter) and two chimes (receivers).
The doorbell is powered by 3× 1.5 V AAA batteries. The transmission between
the button and the chime is done via radio waves at a frequency of 433.92 MHz.
The range depends on local conditions and reaches up to 180 m in open spaces
without interference.
The set has a so-called "self-learning" function – the button is able to generate
its own pairing code which is then received by the chime and stored in its mem-
ory. The set can thus be expanded with additional buttons. Their "self-learning"
function also prevents them from aecting neighbouring doorbells.
For proper usage of the wireless doorbell, read the instruction manual
thoroughly.
Specications
Transmission range: up to 180 m in an open area (can drop down to one fth
in a busy area)
Transmission frequency: 433.92 MHz, 5 mW e.r.p. max.
Button: water resistant; enclosure rating IP56
Pairing of chime with buttons: self-learning function
Pairing capacity: maximum of 6 buttons (replacement button P5728T)
Number of ringtones: 52
Chime power supply: 3× 1.5 V batteries (type AAA)
Button power supply: 1× 12 V battery (type A23)
Includes: double-sided adhesive tape
Chime Description (see Fig. 1)
1 – bell LED
2 – battery compartment
3 – holes for hanging
4 – speaker
5 – ringtone change button
6 – pairing/volume setting button
Button Description (see Fig. 2)
1 – ring button
2 – button LED
3 – hole for opening the battery
cover
4 – battery compartment
Button Installation (see Fig. 3)
Pairing the Button with the Chime
1. Remove the rear cover of the button by inserting a screwdriver into the
hole on the bottom side. Insert a 12 V battery, type A23, into the button.
When inserting a battery, make sure to observe the correct polarity!
2. Insert 3× 1.5 V AAA batteries into the chime. When inserting the batteries,
make sure to observe the correct polarity.
Use alkaline batteries only; do not use re-chargeable batteries.
4
3. Then, long-press the pairing button on the chime for ca. 5 seconds.
The chime LED will light up; release the button.
The chime will switch to self-learning pairing mode which lasts for
25 seconds.
During this time, press the ring button. The chime will ring and the button
is now paired with the chime.
This automatically ends self-learning mode.
4. Re-assemble the button.
5. To pair multiple buttons, repeat the process for each button from step 1.
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons.
Therefore, there is no need to pair buttons again after replacing batteries.
Every time batteries are changed in a doorbell, the currently set ringtone
will sound.
Wiping the Memory of Paired Buttons
Insert 2 AAA batteries into the doorbell, then press and hold the button. Insert
the remaining third AAA battery into the doorbell. The doorbell’s LED will ash
and then remain lit. Release the button; the LED will turn o. This will erase
the memory of all paired buttons.
Ringtone Selection
1. Repeatedly press the ringtone change button or located on the chime.
2. Each press of the button will play a dierent ringtone. The last ringtone
played is the one that will be used.
Setting the Bell Volume
Repeatedly press the button on the chime.
Each press changes the volume 100 % – 75 % – 50 % – 25 % – 0 %.
Installation of the Doorbell (Transmitter) Button
1. Begin by pairing the button with the chime.
2. Before installation, check that the pair works reliably in the chosen spot.
3. Remove the rear cover of the button by inserting a screwdriver into the
hole on the bottom side.
4. Use the double-sided adhesive tape (included) or two screws to x the
rear portion of the cover to the wall. See Button Description/Installation.
Although the button is weather resistant, choose a location where it is
protected, e.g. in a wall recess.
5. Re-assemble the button.
6. Press the button to ring the chime. Pressing is accompanied by LED
illumination indicating the button has sent a radio signal. The chime plays
the selected ringtone.
5
Note: The doorbell button (transmitter) can be placed on wood or brick walls
without issue. However, never place the button directly onto metal objects or
materials containing metal, such as plastic windows or doors that have a metal
frame. In such cases, the transmitter will not work properly.
Installing the Chime (Receiver)
1. The doorbell is intended for indoor use only.
2. The transmission range (max. 180 m) is inuenced by local conditions,
such as the number of walls through which the signal passes, metal door
frames and other elements which aect the transmission of radio signals
(presence of other radio devices operating at a similar frequency, such
as wireless thermometers, gate controls etc.). Transmission range can
decrease drastically due to these factors.
Troubleshooting
The chime is not ringing:
• The chime may be out of range.
• Change the distance between the button and the chime; the range may
be aected by local conditions.
• The button battery may be drained.
• Replace the battery. Make sure it has the correct polarity. Pair the
button with the chime again.
• The chime is not powered.
• Check the batteries in the chime, or replace with new ones.
Upkeep and Maintenance
The wireless digital doorbell is a sensitive electronic device. Therefore, it is
necessary to observe the following precautions:
• The chime (receiver) is designed for indoor use in dry environments only.
• Periodically check the functioning of the doorbell button and replace the
battery in a timely manner. Use only quality alkaline batteries with the
prescribed parameters.
• When the doorchime is not used for a long time, remove the batteries
from the chime and the button.
• Do not subject the button or chime to excessive vibrations and shocks.
• Do not subject the button or chime to excessive heat and direct sunlight
or moisture.
• To clean the device, use a slightly moistened cloth with a small amount of
detergent; do not use aggressive cleaning agents or solvents.
• This device is not intended for use by persons (including children) whose
physical, sensory or mental disability or lack of experience and expertise
prevents safe use, unless they are supervised or instructed in the use of
the appliance by a person responsible for their safety. Children must always
be supervised and must never play with the device.