Znaleziono w kategoriach:
Dzwonki do drzwi (19)
Wróć
3402121000_31-P5729B_00_01_WEB 80 × 120 mm zdroj: 3402044000_31-P5729_00_01_WEB.indd
www.emos.eu
P5729
P5729B
GB Wireless Doorchime
CZ Bezdrátový zvonek
SK Bezdrôtový zvonček
PL Dzwonek bezprzewodowy
HU Vezeték nélküli csengő
SI Brezžični zvonec
RS|HR|BA|ME Bežično zvono
DE Drahtlose Klingel
UA Бездротовий дзвоник
RO|MD Sonerie fără r
LT Belaidis durų skambutis
LV Bezvadu durvju zvans
EE Juhtmeta uksekell
BG Безжичен звънец
FR Carillon sans l
IT Campanello senza li
ES Timbre inalámbrico
NL Draadloze deurbel
2
1
2
21
3
4
1 43
2 4
3
GB | Wireless Doorchime
The set consists of a doorbell button (transmitter) and a chime (receiver). The
chime is deigned for constant connection to 230 V AC/50 Hz mains. The button
is battery-free. Transmission between the button and the chime is done via radio
waves at a frequency of 433.92 MHz. The range depends on local conditions
and reaches up to 180 m in open spaces without interference. The set has a
so-called “self-learning” function – the button is able to generate its own pairing
code which is then received by the chime and stored in its memory. The set
can thus be expanded with additional buttons. Their “self-learning” function
also prevents the set from aecting neighbouring doorbells. For proper usage
of the wireless doorbell, read the instruction manual thoroughly.
Specications
Transmission range: up to 180 m in an open area (can drop down to one fth
in a busy area)
Transmission frequency: 433.92 MHz, 10 mW e.r.p. max.
Button: water resistant; enclosure rating IP44
Pairing of chime with buttons: self-learning function
Pairing capacity: maximum of 6 buttons (replacement button P5729T)
Number of ringtones: 36
Chime power supply: 230 V AC/50 Hz
Button power supply: battery-free
Includes: double-sided adhesive tape
Chime Description (see Fig. 1)
1 – bell LED
2 – speaker
3 – pairing/volume setting button
4 – ringtone change button
Button Description (see Fig. 2)
1 – button LED
2 – ring button
3 – holes for opening the battery cover (rear)
4 – openings for mounting onto a wall
Pairing the Button with the Chime
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the pairing button on the chime for ca. 5 seconds.
3. The chime LED will light up; release the button.
The chime will switch to self-learning pairing mode which lasts for
25 seconds.
4
During this time, press the ring button. The chime will ring and the button
is now paired with the chime.
This automatically ends self-learning mode.
4. To pair multiple buttons, repeat the process for each button from step 1.
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons for the event of a power failure. There is thus no need
to pair buttons again after a power cut.
Wiping the Memory of Paired Buttons
Press and hold the pairing button on the chime.
Plug the chime into a socket.
The LED of the chime will light up after ca. 5 seconds. Release the button.
The LED will turn o.
The memory of all paired buttons will be erased.
Ringtone Selection
1. Repeatedly press the ringtone change button or located on the chime.
2. Each press of the button will play a dierent ringtone. The last ringtone
played is the one that will be used.
Setting the Bell Volume
You can set 4 volume levels.
Repeatedly press the button on the chime.
Each press changes the volume.
Installation of the Doorbell (Transmitter) Button
1. Begin by pairing the button with the chime.
2. Before installation, check that the pair works reliably in the chosen spot.
3. Remove the rear cover by inserting a screwdriver into the hole on the
back of the button.
4. Use the double-sided adhesive tape (included) or two screws, see Button
Description. Although the button is weather resistant, choose a location
where it is protected, e.g. in a wall recess.
5. Re-assemble the button.
6. Press the button to ring the chime. Pressing is accompanied by LED
illumination indicating the button has sent a radio signal. The chime plays
the selected ringtone.
Note: The doorbell button (transmitter) can be placed on wood or brick walls
without issue. However, never place the button directly onto metal objects or
materials containing metal, such as plastic windows or doors that have a metal
frame. In such cases, the transmitter will not work properly.
Installing the Chime (Receiver)
1. The chime is designed for indoor use only.
2. When running, it must be plugged in a 230 V AC/50 Hz socket and with
free space around it so that it is always accessible.
5
3. The transmission range (max. 180 m) is inuenced by local conditions,
such as the number of walls through which the signal passes, metal door
frames and other elements which aect the transmission of radio signals
(presence of other radio devices operating at a similar frequency, such
as wireless thermometers, gate controls etc.). Transmission range can
decrease drastically due to these factors.
Troubleshooting
The chime does not ring:
• The chime may be out of range.
• Change the distance between the button and the chime; the range may
be aected by local conditions.
• The chime is not powered.
• Make sure the chime is properly plugged into the socket and that power
is on or the fuse/circuit breaker for the branch is on.
Upkeep and Maintenance
The wireless digital doorchime is a sensitive electronic device. Therefore, it is
necessary to observe the following precautions:
• The chime (receiver) is designed for indoor use in dry environments only.
• The chime must be located in an easily accessible location for ease of
handling and unplugging.
• Periodically check the functioning of the doorbell button.
• Do not subject the button or chime to excessive vibrations and shocks.
• Do not subject the button or chime to excessive heat and direct sunlight
moisture.
• To clean it, use a slightly moistened cloth with a little detergent, do not
use aggressive cleaning agents or solvents.
• This device is not intended for use by persons (including children) whose
physical, sensory or mental disability or lack of experience and expertise
prevents safe use, unless they are supervised or instructed in the use of
the appliance by a person responsible for their safety. Children must always
be supervised and must never play with the device.
Do not dispose with domestic waste. Use special collection points for
sorted waste. Contact local authorities for information about collection
points. If the electronic devices would be disposed on landll, dangerous
substances may reach groundwater and subsequently food chain, where it
could aect human health.
Hereby, EMOS spol. s r. o. declares that the radio equipment type P5729,
P5729B is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
http://www.emos.eu/download.