Znaleziono w kategoriach:
E8670
GB Wireless Weather Station
CZ Bezdrátová meteostanice
SK Bezdrôtová meteostanica
PL Bezprzewodowa stacja meteorologiczna
HU Vezeték nélküli meteorológiai állomás
SI Brezžična meteorološka postaja
RS|HR|BA|ME Bežična meteorološka stanica
DE Drahtlose Wetterstation
UA Бездротовий метеорологічний пристрій
RO|MD Staţie meteorologică fără r
LT Belaidė meteorologinė stotelė
LV Bezvadu meteoroloģiskā stacija
EE Juhtmevaba ilmajaam
BG Безжична метеорологична станция
FR Station météo sans l
IT Stazione meteo senza li
ES Estación meteorológica inalámbrica
NL Draadloos weerstation
2606174000_31-E8670_00_01_WEB 105 × 148 mm
www.emos.eu
2
1
1
2
3
16
4 5 6 7 8 9
17 15
14
13
12
11
10
1918 20 21 22 23 24
26
27
25
28
29
3
2
1
2
3
4 2
6
5
4
GB | Wireless Weather Station
Read this manual carefully before using the product.
Specications
radio-controlled clock
time format: 12/24 h
indoor temperature: -10°C to +50°C, 0.1°C resolution
outdoor temperature: -30°C to +60°C, 0.1°C resolution
accuracy of temperature measurement: ±1°C for 0°C to +50°C range, ±2°C for -20°C to +0°C
range, ±4°C for -40°C to -20°C range
indoor and outdoor humidity: 10% to 99% RH, 1% resolution
accuracy of humidity measurement: ±5% for 30% to 50% RH range, ±10% for 10% to 29% and
for 51% to 99% RH
barometric pressure measurement range: 800 to 1,100 hPa
unit of pressure: hPa/inHg
precipitation sensor measurement range: 0–999.9 mm
radio signal range: up to 50 m in open area
transmission frequency: 433 MHz, 10 mW e.r.p. max.
number of sensors: max. 1
power supply:
main station: 3× 1.5 V AAA batteries (not included)
adapter: 230 V AC/5 V DC, 1,000 mA (included)
sensor: 2× 1.5 V AA batteries (not included)
size:
main station: 29 × 205 × 127 mm
sensor: 117 × 117 × 164 mm
Weather Station – Description of Buttons and Screen
See g. 1
1 – outdoor temperature
2 – outdoor humidity
3 – chart of pressure / outdoor temperature /
outdoor humidity history
4 – time/DCF signal reception
5 – date
6 – day of the week
7 – alarm
8 – rain alarm
9 – rainfall overview
10 – rainfall history
11 – indoor humidity
12 – comfort smiley
13 – indoor temperature
14 – station/sensor batteries low
15 – max/min measured outdoor temperature
and humidity
16 – weather forecast
17 – pressure value
18 – CH button
19 – ALERT button
20 – HISTORY button
21 – SNZ/LIGHT button
22 – DOWN button
23 – UP button
24 – MODE button
25 – hole for hanging
26 – 5 V/1 A USB port
27 – power adapter socket
28 – battery compartment
29 – stand
Description of the Rain Gauge (Sensor)
See g. 2
The sensor functions as a rain gauge while also being able to measure temperature and humidity.
1 – LED indicator
2 – rain bucket
3 – mounting ring
4 – tipping ap
5 – battery compartment
6 – watertight pad
5
Assembly/Installation of the Rain Gauge (Sensor)
1. Turn the rain bucket clockwise.
2. Remove the paper card from the tipping ap.
3. Fit the rain bucket back on by turning it counter-clockwise; you should hear a click.
4. Turn the sensor upside down.
5. Turn the mounting ring clockwise.
6. Remove the 3 screws on the watertight pad and detach it.
7. Underneath the pad is the battery compartment; insert 2× 1.5 V AA batteries.
8. Replace the pad.
9. Ax the mounting ring to the location of choice using the screws and t the sensor onto it by
turning counter-clockwise; you should hear a click.
Getting Started
1. Insert batteries rst into the wireless sensor (2× 1.5 V AA), then into the weather station (3× 1.5 V
AAA) and plug the power adapter into the station.
2. When inserting the batteries, make sure the polarity is correct to avoid damaging the weather
station or sensor. Only use 1.5 V alkaline batteries of the same type; do not use rechargeable
1.2 V batteries. The lower voltage may cause both of the units to not function.
3. Place the two units next to each other. The weather station will detect the sensor signal within
3 minutes. If signal from the sensor is not detected, long press the CH button on the weather
station to repeat the search.
4. If the outdoor temperature reading disappears from the screen, long press the CH button on the
station and remove and reinsert the batteries in the sensor. The weather station will reset all
values and repeat the search for sensor signal.
5. We recommend placing the sensor on the north side of the house. The range of the sensor may
decrease substantially in areas with a large number of obstacles.
6. To ensure correct measurement, the sensor must be placed in an elevated position (at least
1.5 m) onto a horizontal surface and outside of buildings and structures. The sensor must be
mounted rmly to prevent its damaging.
7. Place the sensor in a place where rain falls directly. The sensor should be placed in an open
space at a sucient distance from surrounding trees and bushes.