Znaleziono w kategoriach:
Smartwatche (40)
Wróć
USER MANUAL
Smartwatch JW-200
(long version)
1. 2.
3.
4.
5.
3
EN
Thank you for buying the Forever brand product. Before use, read this
instruction manual and keep it for future reference. Do not open the
device on your own – any repairs should be carried out by a servi-
ceman. Only use original parts and accessories supplied by the ma-
nufacturer. We hope that Forever will meet your expectations.
Description
1. Touch interface
2. Function button
3. Temperature sensor
4. Heart rate sensor
5. Charging connector
Basic specication
Waterproofness: IP68
Battery capacity: 3.7V/160 mAh
Bluetooth: 5.0
Charging time: 2 hours
Standby time: up to 10 days
Display type: TFT
Display size: 1.4” 240*240 pixel
SAFETY NOTES:
• Avoid impacts between the device and hard objects since this
may damage the device
• Avoid contact of the device with solvents or other chemicals
• Keep away from strong magnetic elds
• Avoid contact of the smartwatch with water if the water tempe-
rature exceeds 35˚C
• Do not repair the device on your own
• Do not throw it into re, there is a risk of explosion
First launching
When using the device for the rst time, take it out of the package
and charge it using the supplied charging cable. The device will turn
on automatically after charging is completed. Date and time of the
device will be automatically synchronized and set after establishing
connection with a dedicated application via Bluetooth. Language of
the device will be automatically adapted to the one set in the phone.
4
EN To activate the smartwatch without connecting it to the charger,
press and hold the touch button located below the display for 3 se-
conds.
Charging
Connect the device with the charging cable included in the kit. Make
sure that the device and cable connectors are connected to each other,
and then connect the USB cable to a power source.
After the charging process is complete, disconnect the smartwatch
from the charging cable and disconnect the cable from the power
source.
Turning the smartwatch on/off
Turning on: Press and hold the function button until the smartwatch
turns on.
Turning off: Press and hold the function button until the device turns
off. You can also go to the settings tab in the smartwatch menu and
select the „Disable” option marked with the following symbol , and
then conrm your choice.
„Forever GoFit” application installation
Find application called “Forever GoFit” in Google Play or App Store
and install it.
NOTE: The operating system of the phone must have the follo-
wing minimum specications to run the application and support
the smartwatch: Android 5.0 or higher / iOS 10.0 or higher
Connect the smartwatch with the phone
1. Activate Bluetooth in your phone.
NOTE: To be able to use all functions of the application and
the smartwatch, during the rst launching, allow the application
to access all required functions, and then also activate access to
notications.
2. Activate “Forever GoFit” in the phone. Start using the application
as a “Guest” by clicking the upper right part of the screen or select
“Register” and follow the steps below:
5
EN
– enter the email address you want to use to create an account
– press the button (obtain verication)
– a verication code, which must be entered in the indicated eld,
will be sent to your email
– enter and remember your user password
3. After logging into the application, you will see the main screen, in which you
should click button or select menu in the upper left corner.
4. Select the smartwatch model you want to connect with by clicking its
picture:
5. Conrm the selected model by clicking “YES”. If a wrong model has
been selected, click “NO” and select the correct one.
6. From the list of devices, select the Bluetooth name of your device
and conrm the connection by selecting „YES”. After a few seconds, it
will connect and all data will be synced automatically. If automatic syn-