-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
USER MANUAL KIDSWATCH KW-500
1
25
3
4
6
4
EN
Thank you for buying Forever brand product. Before use, read this instruction manual and
keep it for future reference. Do not open the device on your own – any repairs should be car-
ried out by a serviceman. Only use original parts and accessories supplied by the manufactu-
rer. The device must not be exposed to direct re or other heat sources. We hope that Forever
will meet your expectations.
Introduction
Before using the kids watch, carefully read the instruction manual to ensure correct operation.
Kids watch is a small telecommunication device, used to locate its position and send data.
Operation of the device is based on GSM/GPRS mobile network.
IMPORTANT: The device requires installation of a micro SIM card with active
service, allowing to make and receive calls, with no PIN lock. It is recommen-
ded to deactivate voicemail. When sending information regarding location, the
watch will require access to mobile Internet, therefore, you should buy at least 1
GB package. Use of the watch may be associated with fees for using the network
and calls, in accordance with the operator’s tari.
Specication
Display: 1.44’’ 240x240 px
Touch screen: yes
Standby time: do 3 days
Charging time: 2 hours
Strap length: 234 mm
Battery: 700 mAh
Camera: yes
Microphone and speaker: built-in
SIM card slot: nano SIM (with no PIN lock)
Compatibility: Android ≥ 5.0 , iOS ≥ 10.0
THE MAXIMUM RADIATED RADIO
FREQUENCY POWER IN THE FREQUENCY RANGE:
Frequency range: Transmit power:
GSM 900/1800 MHz 33,51/30,44dBm EIRP
UMTS 900/2100MHz 23,77/23,87 dBM EIRP
LTE
800/900/1800/
2100/2600 MHz
23,49/23,10/23,10/
23,44/23,27 dBmEIRP
Wi-FI 2412-2472 MHz 16dBm EIRP
Bluetooth 2402-2480
MHz ≤20dBm EIRP
5
EN
Device description
1. Camera
2. Turn on / SOS button / return to the main screen
3. Return button
4. Speaker
5. SIM card slot
6. Charging connector
The set includes
- smartwatch
- charging cable
- user manual
- Tools for installing a SIM card
Charging
It is recommended to use a charger of output parameters of 5V --- 1A. Charger is not included
in the set. Full charging time of the watch is approximately 2 hours. Connect the connector
of the included charging cable to the charging connector on the device. Make sure that the
device and cable connectors are connected to each other, and then connect the USB cable
to a power source.
Installing the SIM card
Always make sure your watch is turned o before inserting or removing the SIM card. Never
insert or remove the SIM card when the watch is turned on. Open the SIM card slot with the
screwdriver included in the set, and then place the SIM card in a position such that the SIM
card chip is facing the top of the watch screen, you will hear a click signaling correct installation.
Then close the SIM card slot
First run
After installing the SIM card in the watch and charging the device, you can start it by pressing
and holding the on button. After starting, the watch connects to the mobile network.
Device operation
We operate the device via a touch screen. By sliding your nger on the screen, you can switch
between individual functions and you select a given function by pressing the screen.
1. The phone book - gives you access to contacts dened using the application.
2. Chat - allows you to receive and send messages between the application and the device.
3. Telephone - allows you to make a telephone call by manually entering the number.
4. History - allows you to view the phone call history of the device.
5. Video chat – allows you to make video calls.
6. Camera - allows you to take pictures with your device’s camera.
7. Gallery - allows you to view photos taken with the device.
