00221848
TV HEADPHONES
“Station”
GOperating Instructions
DBedienungsanleitung
FMode d‘emploi
EInstrucciones de uso
NGebruiksaanwijzing
IIstruzioni per l‘uso
PInstrukcja obsługi
HHasználati útmutató
MManual de utilizare
CNávod k použití
QNávod na použitie
OManual de instruções
SBruksanvisning
RРуководство по эксплуатации
BРаботна инструкция
JΟδηγίες χρήσης
TKullanma kılavuzu
LKäyttöohje
1
2
3
4
5
8
9
6
7
10
11
A
B
C
TV
5
GOperating Instructions
1. Controls and displays
1. Integrated microphone
2. USB-C charging socket
3. 3.5 mm jack socket
4. Telephone Answer - Reject - Hang up
5. Volume +
6. Volume -
7. On/Off switch
8. Mode button (Full - Voice - Normal)
9. Function LED
10. Audio display
11. Charge display
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for future
reference. If you sell the device, please pass these operating instructions
on to the new owner.
2. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from touching
uninsulated product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
3. Explanation of symbols used on the product label
2–2
W
The power of the charger must range from a minimum
power of 2.0 watt required by the radio system to a
maximum power of 2.0 watt required to achieve the
maximum charging speed.
The standardised USB interface means that a charger
with a higher output power can also be used.
4. Package contents
•1 x TV headphones
•1 x 2.4 GHz station
•1 x power supply unit for station
•1 x audio cable
•1 x instruction manual
Note - Power supply unit
The enclosed power supply unit is only suitable for connection to the
transmitter/charging station.
5. Safety instructions
•The product is intended for private, non-commercialuse only.
•Use the product only for the intended purpose.
•Children should be supervised to ensure that they do not play with
the product.
•Do not use the product in areas in which electronicproducts are not
permitted.
•Do not attempt to service or repair the product yourself. Leave any
and all service work to qualied experts.
•Do not open the device or continue to operate it if it becomes
damaged.
•Do not bend or crush the cable.
•Do not drop the product and do not expose it to any major shocks.
•Dispose of packaging material immediately in accordance with the
locally applicable regulations.
•Do not modify the product in any way. Doing so voids the warranty.
•Protect the product from dirt, moisture and overheating and use it in
dry environments only.
•Do not use the product in the immediate vicinity of heaters, other
heat sources or in direct sunlight.
•Only use the article under moderate climatic conditions.
•As with all electrical products, this device should be kept out of the
reach of children!
•Do not operate the product outside the power limits given in the
specications.
•Do not use the product in a damp environment and avoid splashing
water
•While driving a car or using sports equipment, do not allow yourself
to be distracted by your product and keep an eye on the trac
situation and your surroundings.
•The battery is permanently installedand cannot be removed;
dispose of the product as a whole in accordance with the statutory
regulations.
•Do not incinerate the battery or the product.
•Do not tamper with or damage/heat/disassemble the batteries/
rechargeable batteries.
•Do not use the product during the charging process!
Risk of electric shock
•Do not open the device or continue to operate it if it becomes
damaged.
•Do not use the product if the AC adapter, adapter cable or power
cable is damaged.
•Do not attempt to service or repair the product yourself. Leave any
and all service work to qualied experts.
Warning - rechargeable battery
•Only use suitable charging devices or USB ports to chargethe
product.
•Do not use defective chargers or USB ports and do not attempt to
repair them.
•Do not overcharge the product or allow the battery to completely
discharge.
•Avoid storing, charging and using in extreme temperatures and at
extremely low atmospheric pressures (such as at high altitudes).
•When stored over a long period of time, batteries should be
charged regularly (at least every three months).
6
Warning - magnets
•This product generates magnetic elds. Individuals with cardiac
pacemakers should consult a doctor beforeusing this product as it
may affect the pacemaker's proper function.
•Do not store bank or similar cards with magnetic strips near the
charging case or earphones. The data on the cardscould be
damaged or completely deleted.
Warning - high volume
•High sound pressure!
•There is a risk of hearing damage.
•To prevent any loss of hearing, avoid listening at loud volumes for
prolonged periods.
•Always keep the volume at areasonable level. Loud volumes can
damage hearing –even over shortperiods.
•Using this product limits your perception of ambient
noise. For this reason, do not operate any vehicles or
machines while using this product.
6. Installation and commissioning
6.1 Transmitter installation
Warning
•Only operate the product from an approved socket that is
connected to the public power supply. The socket must be installed
close to the product and must be easily accessible.
•Disconnect the product from the power supply using the On/Off
switch – if this is not available, unplug the power cord from the
socket.
•If using a multi-socket power strip, make sure that the total power
consumption of all connected devices does not exceed the socket
strip's maximum throughput rating.
•If you will not be using the product for a prolonged period,
disconnect it from mains power.
•Connect the 2.4 GHz station to asuitable power sourceusing the
power supply unit supplied.
•Now connect the audio output of your TV to the jack socket of the
station using the audio cable supplied. Alternatively, you canconnect
the station to the optical output of the TV using an optical cable (not
included in the extent of delivery).
6.2 Receiver installation
•Charge the headphones fully before using them for the rst time. LED
lights up red.
•Switch the headphones on (7). LED ashes cyan.
•The headphones automatically recognise the 2.4 GHz signal and the
LED lights up blue.
•Alternatively, the headphones can be operated via BT.If the
headphones do not receive a signal from the 2.4 GHz transmitter,
they automatically switch to BT reception. Select "hama TV-
headphones Station" in your playback source. After successful
pairing, the LED lights up green.
Note: Power supply unit
•The supplied power supply unit is not suitable for the headphones.
To charge them, place the headphones on the charging station.
Alternatively, the headphones can be charged via a suitable USB-C
cable (not included in the extent of delivery).
6.3 Switching on/off
ON: Press the On/Off button (7) for approx. 2 seconds, the
announcement “Power On” sounds.
OFF: To switch off, press the On/Off button (7) for approx. 3seconds,
the announcement “Power OFF” sounds.
Note – Automatic switch-off of the headphones
The headphones are equipped with an automatic switch-off
mechanism. If there is no connection to your device within 3minutes,
they switch off automatically.
7. Charging
Fully charge the headphones once before using them for the rst time.
7.1 Switch off the headphones and connect them
•Ensure that the headphones are switched off before charging them.
•Hang the headphones on the charging station.
•Alternatively, connect a USB charging cable (not included in the
extent of delivery) to the charging socket (2). Connect the free plug
on the USB-C charging cable to a suitable USB charger.To do this,
consult the operating instructions for the USB charger you are using.
7.2 Charging process for the headphones
The LED (9) lights up solid red during the charging process.
Once the charging process is complete, the LED (9) goes out.
It can take up to 2.5 hours for the battery to be fully charged.
7.3 Battery capacity
When the headphone battery capacity is low, the LED (9)ashes red
and the announcement "Battery Low" is heard.
8. Bluetooth® connection (pairing) - Alternative use - directly
without dongle
Note - pairing
•Ensure that the Bluetooth®-enabled device is switched on and that
the Bluetooth®function is activated.
•Please refer to the operating instructions of your device for more
information.
The headphones and the device should not be more than 1metre apart.
The shorter the distance, the better.
Switch the headphones on usingthe On/Off button (7).
Press the Vol+ (5) and Vol- (6) buttons simultaneously for 3seconds
until you hear “Pairing”.
If the LED (9) is flashing alternately blue and the
announcement:
Headphones searching for a Bluetooth® connection.
When the LED (9) lights up green and the announcement:
The headphones are already paired with a Bluetooth® device.