Instrukcja obsługi Gramofon JVC AL-E534B Czarny, Manualny, Napęd paskowy, Prędkość odtw. 33 1/3,45 obr./min
TURNTABLE
AL-E534B / AL-E534M
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
Thank you for buying our product. Please read through these operating instructions, so you will
know how to operate your equipment properly. After you nished reading the instructions manual,
put it away in a safe place for future reference.
SAFETY
General
• Do not drop the device and do not expose it to liquid, moisture or humidity. These might lead to
damage to the device.
• If the device is moved from a cold environment into a warmer one, do let it adapt to the new
temperature before operate the device. Otherwise, it might lead to condensation and cause
malfunctions in the device.
• Do not use the device in the dust environment as dust can damage the interior electronic
components and lead to malfunctions in the device.
• Protect the device from strong vibrations and place it on stable surfaces.
• Do not attempt to disassembly the device.
• If the device is not using for a long period of time, disconnect it from the power supply by
unplugging the power plug. This is to avoid the risk of fire.
• The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power adapter
• Only use the power adaptor delivered with the device.
• The socket outlet should be installed near the device and should be easily accessible.
• Never touch the power plug with wet hands and never pull on the power cable when pulling the
plug out of the power socket.
• Make sure the electrical voltage specified on the device and its power plug is corresponding to
the voltage of the power socket. Incorrect voltage will destroy the device.
PARTS AND CONTROLS
1. Dust cover
2. Dust cover hinges
3. Spindle
4. Rubber mat
5. Platter
6. Counterweight
7. Anti-Skating dial
8. Tone arm lift lever
9. Tone arm clasp/rest
10. Tone arm
11. Stylus / Cartridge
12. Pitch control knob
13. Rotation speed setting knob
14. Output select button
15. DC IN port
16. Analog audio output (L/R)
17. Grounding terminal
18. BT indicator
19. BT button
20. 45 RPM adapter
EN
GETTING STARTED
Precautions on placement
• Place the turntable on a level surface.
• Do not place the turntable on top of an amplifier or other equipment that might generate
heat that exceeds the operating temperature range of this turntable. Doing so could cause
discoloration, deformation, or malfunction.
• Do not place anything on the dust cover. Objects on the cover might cause noise due to
vibrations or fall off, especially during playback.
• Place the turntable where it will not be subject to any vibration, such as from speakers,
slamming of doors, etc.
• Keep the turntable away from direct sunlight, extremes of temperature, and excessive dust and
moisture.
• Keep the turntable away from electronic devices that may emit radio waves or electromagnetic
noise.
• Avoid placing the turntable near electrical appliances (such as a television, hair dryer, or
fluorescent lamp), which may cause hum or noise.
NOTE: Always remove the vinyl record before relocating or moving this turntable. Moving the turntable with a vinyl
record on the platter could damage the vinyl record, the stylus and the cartridge or could cause a malfunction.
ASSEMBLING THE TURNTABLE
When you purchased the turntable, a protective cover was attached to the stylus. Leave the cover
on as you assemble your turntable.
NOTE: The stylus is a high-precision component. Do not touch the stylus while handling it. Touching the stylus with
your fingers, or banging the stylus into the platter, may cause damage to the stylus.
DO NOT CONNECT the turntable to a power outlet with the AC adapter until you have completed
the installation and connection.
Attaching the platter
Flip the platter and make sure the drive belt is not misaligned and
o-center.
Place the platter on the spindle. Turn the platter to the position where
you can see the motor pulley through the rectangular hole with the
tips of the red ribbon (A) taped on the platter (B).
NOTE: Keep the platter level while placing it on the spindle.