Znaleziono w kategoriach:
Smart Air Conditioner
with thermostat app and voice control
WIFIACMB1WT14
ned.is/wiacmb1wt14
a Quick start guide 4
c Kurzanleitung 6
b Guide de démarrage rapide 9
d Snelstartgids 12
j Guida rapida all’avvio 14
h Guía de inicio rápido 17
i Guia de iniciação rápida 19
e Snabbstartsguide 22
g Pika-aloitusopas 24
f Hurtigguide 27
2 Vejledning til hurtig start 29
k Gyors beüzemelési útmutató 31
n Przewodnik Szybki start 34
x Οδηγός γρήγορης εκκίνησης 37
1 Rýchly návod 39
l Rychlý návod 42
y Ghid rapid de inițiere 44
Specications
Product Smart Air Conditioner
Article number WIFIACMB1WT14
Weight 33.5 kg
Input voltage 220 – 240 V ~ 50 Hz
Required power 1610 W
Energy class A
Energy eciency ratio (EER) 2.6
Adjustable temperature range 16 - 31 °C
Noise level ≤ 65 dB(A)
Cooling capacity 14000 BTU
Room size capacity 120 m3
Air circulation 500 m³/h
Dehumidication 40 l/day
Refrigerant R290 / 280 g
Power plug Schuko CEE 7/7
Battery type 2x AAA (not included)
Permissible excessive operating
pressure
Suction 0.6 MPa
Discharge 1.8 MPa
Max. allowable pressure 3.0 MPa
Room coverage 120 m³ *
Operation modes Cooling / Dehumidifying / Fan
Fan speed levels High / Middle / Low
Max. radio transmit power 802.11b 17.5 dBm
802.11g 14.5 dBm
802.11n 13.5 dBm
Antenna gain 2.5 dBi
Used frequency band 2412 - 2472 MHz
Channels 1-13
Modulation method DSSS, OFDM, 64QAM
* The performance of an air conditioner is subjected to many factors,
such as oor space, ceiling height, level of isolation and number of
windows. The data mentioned is based on a space with low heat
loads.
Swing Sleep
Cool Fan Dry
Hr
F
C
1
u
t
y
8
9
q
w
r
e
o
i
2
4
5
6
7
3
Swing Sleep
Cool Fan Dry
Hr
F
C
5
7
6
3
8
e
1
9
4
1 2 3 4 5 7 8 9
6
q
q
w
B
A
4
C
a Quick start guide
Smart Air Conditioner WIFIACMB1WT14
For more information see the extended manual online:
ned.is/wiacmb1wt14
Intended use
The Nedis WIFIACMB1WT14 is a local air conditioner used for cooling
and dehumidifying rooms.
The product is exclusively intended as a local air conditioner for
domestic, indoor use.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
The product is intended for use in household environments for
typical housekeeping functions that may also be used by non-expert
users for typical housekeeping functions, such as: shops, oces
other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1 Swing louvers
2 Display
3 Handle
4 Exhaust nozzle
5 Exhaust hose
6 Window kit
7 Window kit fasteners
8 Control panel
9 EVA-lter frame
q EVA-lter screen
w Continuous drainage outlet
e Air outlet
r CON-lter frame
t Manual drainage outlet
y Power cable
u Exhaust hose connector
i Remote control
o Exhaust nozzle screw
Control panel and remote control (image B)
1 Timer button
2 Mirage button
3 Mode selection button
4 Sleep mode button
5 Temperature up button
6 Display
7 Temperature down button
8 Fan speed button
9 Swing button
q Power button
w Wi-Fi indicator LED
e Temperature button
Safety instructions
Icon Description
Indication to explain that the product:
• Contains one or more (extremely/highly)
ammable components.
• contains one ore more pyrophoric components
that catch re spontaneously if explosed to air;
• contains one or more pyrophoric components
that is/are self-heating and may catch re;
• contains one or more pyrophoric components
that release(s) ammable gases and may ignite
spontaneously when in contact with water.
-
WARNING
• Ensure you have fully read and understood the instructions in this
document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Close supervision is necessary when the product is used by or near
children, animals or inrm persons. Do not allow children to play
with it or touch it.
• Keep the product out of reach from children.
• Do not use a damaged or defective product, but return it for repair
or replacement.
• Do not expose the product to water, rain, moisture or high
humidity.
• If the product is immersed in water, do not touch the product or
the water.
• Shut o the main power grid and carefully remove the plug from
the power outlet.
• After the product has been immersed or covered in water or other
liquids, do not use the product again.
• Keep the product away from heat sources. Do not place the
product on hot surfaces or near open ames.
• Do not insert any objects into the product.
• Do not drop the product and avoid bumping.
• Do not obstruct or cover the product’s air inlet or outlet grid.
• Do not dismantle, open or shred batteries.
• Do not expose cells or batteries to heat or re. Avoid storage in
direct sunlight.
• Do not store cells or batteries haphazardly in a box or drawer
5
where they may short-circuit each other or be short-circuited by
other metal objects.
• Do not subject cells or batteries to mechanical shock.
• In the event of a cell leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
aected area with copious amounts of water and seek medical
advice.
• Do not mix cells of dierent manufacture, capacity, size or type
within a product.
• Only use the battery type(s) recommended in this document.
• Keep cells and batteries clean and dry.
• Retain the original product literature for future reference.
• When possible, remove the battery from the product when not in
use.
• Do not remove a cell or battery from the original packaging until
required for use.
• Do not use any cell or battery that is not designed for use with the
product.
• Use only the cell or battery in the application for which it was
intended.
• Wipe the cell or battery terminals with a clean dry cloth if they
become dirty.
• Battery usage by children should be supervised.
• Observe the plus (+) and minus (–) marks on the battery and the
product to ensure correct placement.
• Dispose of the cell or battery properly.
• Seek medical advice immediately if a cell or a battery has been
swallowed.
• The appliance shall be installed in accordance with national wiring.
• Always disconnect the product from the power outlet when
cleaning or moving the product.
• Do not pull the power cable to move the product.
• Unplug the product from the power outlet and other equipment if
problems occur.
• Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
• Switch o the main power switch before unplugging the power
cord.
• Do not use the product when the cord or plug is damaged.
• Make sure that the electrical supply in your area matches a voltage
of 220 – 240 VAC and a frequency of 50 Hz.
• Connect to a grounded outlet only.
• If necessary, use an earthed extension cable of a suitable diameter.
• Fully extend the power cord and make sure the power cord does
not contact the product.
• When using an extension cord, use one which is as short as
possible and fully extended.
• Do not use external timers or remote control systems to switch the
product on or o.
• Ensure people do not trip over the cord.
• Make sure that the power cable cannot become entangled and
does not hang over the edge of a worktop.
• Do not leave the product unattended when switched on.
• R290 is a refrigerant gas that complies with the European
directives on the environment.
• Be aware that refrigerants can be odorless.
• Place the product in an area without any continuous sources of
ignition (for example: open ames, gas or electrical appliances in
operation).
• Only install, operate and store the product in a room with a oor
area above 14 m2.
• Only store the product in a well-ventilated area.
• Store the product in such a way as to prevent mechanical failure.
• When the product is installed, operated or stored in a
non-ventilated area, make sure the room is designed to prevent
the accumulation of refrigerant leaks resulting in a risk of re or
explosion due to ignition of the refrigerant caused by electric
heaters, stoves, or other sources of ignition.
• Only persons with a current valid certicate from an industry-
accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specication, can work on or
break into a refrigerant circuit.
• Servicing can only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel can only be carried out under
the supervision of the person competent in the use of ammable
refrigerants.
• When defrosting and cleaning the product, do not use any means
other than those recommended by the manufacturing company.
• Do not puncture or heat any part of the refrigerant circuit.
• This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
Installing the product
-
Place the product on a stable and at surface.
-
Only move the product in an upright position.
-
Leave a minimum of 0.5 m space around the air inlet and outlet
to allow a good circulation of airow.
-
If the product has been tilted, allow it to stand upright for 2
hours before plugging it in.
-
Only install, operate and store the product in a room with a oor
area above 14 m2.
-
Keep the product at a distance from ammable objects such as
furniture, curtains and similar.
-
Do not block ventilation openings and make sure that there is
enough space around the product.
Plug the power cable Ay into the power outlet.
Assembling the exhaust (image C)
-
Only use the provided exhaust hose.
-
Do not block the exhaust hose, this may cause overheating.
1. Assemble the exhaust hose A5, the exhaust nozzle A4 and the
exhaust hose connector Au.
2. Connect Au to the air outlet Ae.
3. Extend A5 up to 1500 mm.
-
Do not twist the exhaust hose.
-
Ensure that the exhaust hose does not kink.
4. Assemble the window kit A6 the fasteners A7.
5. Install A6 in the window opening.
4The window kit can be placed in horizontal and vertical
direction.
6. Tighten A7.
7. Snap A4 into A6 and fasten with the exhaust nozzle screw
Ao.
Assembling the continuous drainage (optional)
-
Works only in dehumidifying and heating mode.
1. Open the continuous drainage outlet Aw.
2. Connect Aw to a water container or drainage system (not
included).
Placing the batteries in the remote control
1. Slide the battery cover o the back of the remote control Ai
2. Insert 2 type AAA batteries.
3. Slide the battery cover back in place on Ai.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail
address and tap Continue.