-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
English 3
Deutsch 7
Français 11
Español 15
Nederlands 19
Norsk 23
Svenska 27
Dansk 31
Polski 35
Eesti keel 39
Русский 43
汉语 51
Tiếng Việt 55
ةيبرعلا47
2
CONTENTS
1. Floss tip
2. Floss tip collar
3. On-demand button
4. Power button
5. Mode selection button
6. Main body
7. Water tank body
8. Water tank base
9. Mode indicator panel
10. Floss tip release button
11 . USB-C charging port
12. Water tank release button
13. Water tank cap
14. Water tank base release button
Orthodontic & Periodontal tips sold separately. Our full
selection of floss tips are available at ordolife.com
A. Premium Clean – Ideal for excellent everyday
cleaning. Suitable for most people.
B. Orthodontic – Tapered bristles help clean around
braces, bridges, implants and other dental work.
C. Periodontal – Designed to rinse periodontal
pockets, helping to protect against gum disease.
3
ENGLISH PRODUCT DESCRIPTION
(1) Remove all the contents from the box and check you have all parts
specified. Make sure you recycle the inner and outer boxes after use.
(4) During the charging cycle, the lights on the mode indicator panel will
follow a sequence as shown in the diagram, to indicate the water flosser’s
charging status. When the coloured light turns green, the water flosser is
fully charged. A full charge will last 30 days when using the water flosser
for 2 minutes each day.
(2) Simply push the floss tip into the slot at the top of the water flosser, until
it clicks into place. To eject, press the floss tip release button on the back of
the water flosser, then pull the floss tip out.
(5) Once you have charged the water flosser, remove the USB-C charging
cable and securely close the cover. Make sure that this is closed properly to
avoid water getting inside.
(3) Before using your water flosser, you should charge it for 6 hours. Open
the USB-C port cover, then plug in the USB-C connector of the charging
cable. Connect the USB-A connector to a power source. Ensure the water
flosser is not on prior to charging.
MAKE SURE THE USB-C PORT IS DRY BEFORE CHARGING!
(6) For travel convenience, you can store your Premium Clean floss tips
inside the water tank, as shown in the diagram. Simply push the water tank
release button at the top of the water tank and slide off. Inside you will find
two slots to securely store your Premium Clean floss tips. To reattach the
tank, slide back onto the main body until it clicks into place.
4
SETTING UP
(1) To fill your water flosser, flip open the cap on the back of the water
tank and fill with clean, lukewarm water (under 40°C). You could also add
a few drops of Ordo Mouthwash Concentrate for extra freshness. If you use
mouthwash, run a full tank of fresh water through the flosser after use, to
avoid residue build-up.
(4) Hold the floss tip at a 90° angle to your gum line and pause in
between each tooth to ensure a thorough clean. Clean along the gum line
as well as between teeth. Clean inside as well as outside surfaces. To get
the most from the water tank, do not tilt the water flosser back during use.
To help protect your water flosser, it will automatically turn off after running
for 2 minutes.
(2) Short press the mode selection button to scroll through the 3 pressure
settings:
1 - Sensitive Mode (low) – recommended for new users.
2 - Daily Clean Mode (medium)
3 - Power Clean Mode (high)
You can change modes whilst using your water flosser.
(5) Your water flosser has a 260ml tank capacity, which provides 55
seconds of use. We recommend 2 full tanks per flossing session, one for the
top teeth and one for the bottom. Make sure the tank is fully emptied after
use and open the cap to let it air dry. Wipe down the floss tip and main
body.
(3) Lean over the sink, place the floss tip in your mouth and part your lips
slightly to allow water to flow out. Press the power button to begin flossing.
Alternatively, press the on-demand button to control the flow of water –
press and hold for a continuous flow and release to stop.
(6) To deactivate your water flosser for travel or storage, press and hold
the mode selection button until the red light begins to flash, at which point
the Lock Mode is activated. In Lock Mode the lock light will flash 5 times
when you short press any button. Simply press and hold the mode selection
button again to unlock the device – the last used mode will illuminate once
your flosser is unlocked.
5
USING YOUR WATER FLOSSER
