USER MANUAL
Moony
1
Specications
•Bluetooth Version: 5.4
•Working Distance Range: 10M
•Speaker dimension: 40 mm
•Frequency Range: 20Hz-20kHz
•Charging Voltage: DC 5V
•Sensitivity: 100dB+/-3dB
•Charging time: around 3 hours
•Playtime: 70 Hours | 35 Hours ANC On
•Frequency band: 2.4000 GHz - 2.4835 GHz
•Operating frequency: 2 400 MHz - 2 483.5
MHz
•Rated power consumption: 20mw
•Maximum output power: < 10 dBm
•Operating temperature of the products:
-20 to 60 celsuis.
DEVICE LAYOUT
1. On/off, Play/pause button
2. Volume+/Next song
3. Volume-/Previous song
4. ANC Mode Button
5. Battery/Charging indicator
6. Type-C charging port
7. AUX port
8. MIC
Support Email: info@powerlocus.com
Powerlocus EN Moony Manual
2
CHARGING
1. Connect the charger to the charging port.
2. While charging the LED indicator will be solid
red. When fully charged the LED indicator will
turn off automatically.
ACTIVE NOISE CANCELLATION (ANC)
ON/ OFF AND TRANSPARENT MODE
Short press the ANC button to cycle through
the following modes: TRANSPARENT MODE
> ANC ON > ANC OFF. You will hear a beep
announcement telling you which mode you are
in: ‘Transparent On’ and voice ‘ANC On’ or
‘ANC Off’. The ANC LED light will glow
GREEN while either Transparent mode or ANC
mode is being used.
PAIRING
1. Turn on the headphones by pressing and
holding down the On/Off (1) button on the
headphones for three seconds.
2. The device’s LED indicator will illuminate.
The LED indicator light will blink between red
and blue when it is in pairing mode.
3. On the mobile device(smartphone/tablet)
turn on the BT connection.
4.Select “PowerLocus Moony”in the available
Wireless devices on your mobile device.
Powerlocus EN Moony Manual
3
CHARGING
1. Connect the charger to the charging port.
2. While charging the LED indicator will be solid
red. When fully charged the LED indicator will
turn off automatically.
ACTIVE NOISE CANCELLATION (ANC)
ON/ OFF AND TRANSPARENT MODE
Short press the ANC button to cycle through
the following modes: TRANSPARENT MODE
> ANC ON > ANC OFF. You will hear a beep
announcement telling you which mode you are
in: ‘Transparent On’ and voice ‘ANC On’ or
‘ANC Off’. The ANC LED light will glow
GREEN while either Transparent mode or ANC
mode is being used.
PAIRING
1. Turn on the headphones by pressing and
holding down the On/Off (1) button on the
headphones for three seconds.
2. The device’s LED indicator will illuminate.
The LED indicator light will blink between red
and blue when it is in pairing mode.
3. On the mobile device(smartphone/tablet)
turn on the BT connection.
4.Select “PowerLocus Moony”in the available
Wireless devices on your mobile device.
FUNCTIONS
You can operate the headphones with the
buttons on the headphone. Please check
below instruction
Powerlocus EN Moony Manual
4
Factory reset the connection:
By holding the „-“- button and + button at the same
time for 5-6 seconds, the headphones will disconnect
from the paired device and the LED will change from
solid BLUE to Flashing BLUE/RED.
Once disconnected, you can repeat the action for
reset again, so the Bluetooth memory will
be deleted fully.
Next song Long press (2)
Long press (3)Previous song
Volume +
Volume -Short press (3)
Short press (2)
Press (4)ANC On/Off
2s press (1)Siri/Google Assistant
Play/pause music Press (1)
Pick up phone call Short press (1)
Short press (1)
Reject phone call Long (2s) press
End phone call
Long press (2)
Next song
Long press (3)
Previous song
Powerlocus EN Moony Manual