USER MANUAL
For Warranty or Problems with
the product, please contact us!
Email Support:
info@powerlocus.com
PowerLocus
PowerLocus
P2 Kids
1
78910
1. Power on /off
2. play/pause, answer/end calls, reject call,
last number redial
3. Volume up (Short Press)
Next song (Long Press)
4. Volume down (Short Press)
Last song (Long Press)
5. Multi-function button(pairing,auto search radio)
6. Headset jack
7. LED indicator
8. USB-C charging port
9. Microphone
10. Micro SD/TF card slot
Bluetooth Version: V5.3
Working Distance Range: 10M
Frequency Range: 20Hz-20kHz
Audio Drivers: Φ40mm
Charging Voltage: DC 5V
Charging Time: About 1.5 Hours
Talking/Music Time: About 20 Hours (50% Volume)
Volume Sensitivity: 85/94dB
Frequency band: 2.402-2.480GHz
Operating frequency: 2402-2480MHz
Rated power consumption: 120 mW
Maximum output power: < 7dBm
Operating Temperature: 0 °C to 45 °C
1. PRODUCT INDICATION
Impedance: 32 Ohms
Weight:
175g/0.39LBs
1
• POWER ON: Slide the switch right and the
headset said:the wireless is ready to pair ).
• POWER OFF: Slide the switch left and blue
indicator light will go off.
• Slide the switch right and the blue and red
wireless is ready to pair ).
• Turn on the bluetooth function of your phone
or other products.
• Search for the bluetooth devices and
select”PowerLocus P2 Kids”.(Enter the
code ‘0000’ if needed)
• If paring is successful,the blue light indicator
is connected successfully).
• Please make sure the headphone is working
before pairing.
• It will connect to the pre-set phone automati-
cally when turns on(Please make sure the
bluetooth function of your phone is working)
• If the pairing is not successful, please switch
2.POWER ON/OFF THE HEADSET
3. PAIR TO YOUR MOBILE
PHONE OR OTHER PRODUCTS
2
• When there is a call,short press button can
answer the call. After the call,press button
can hang up. If the other side hang up,no need
to press the button.
• reject call: long press button about 2-3sec.
• last number redial: press fast button 2
times
• When the phone call out or answer the call,if the
bluetooth headphone are playing the music,the
music will pause automatically and enter the
waiting state.After hang up,the music will
continue to play automatically.
4. MP3/FM
• In power-on mode, insert the TF card,short press
button, MP3 will play automatically.
• If have not TF card, short press button, FM
radio will play automatically.
• (1) In power-on mode, short press button , FM
radio will play automatically. (2) Long press the
Play/Pause button to auto search all radio
station, (3) wait for 40sec to 1min for the
stations to be memorized, (4) then long press
or, you will listen to any radio station you like..
• If you are listening to FM radio,short press
button,it will be converted to the bluetooth
mode.And auto connected to your phone or
other products.
5. ANSWER/END CALLS, REJECT
CALL, LAST NUMBER REDIAL
(In the bluetooth mode)
3
• Insert USB charging cable into USB port which
have support 5V power (such as AC/DC USB
adapter or PC USB port). When the red light is
on, the headset is in charging. When the red light
will be off, the headset is fully charged. It takes
about 2-2.5 hours to charge the headset fully.
• The battery is rechargeable.Low-Voltage
alert:When the alert tone ‘low battery’ sounds
and the indicator turns into red indicate that the
battery has run out,need to be charged as soon
as possible.First time charging : please be sure
the battery has been charged fully before use.
6. CHARGING THE HEADSET
For any mode of headphone,you can connect one
side of 3.5 stereo sound supply extension line to
headphone audio jack,the another side connect to
Audio jack(such as mobile phone,computer,Ipad
etc).Then you will hear songs from other devices.
7. WIRED HEADPHONE FUNCTION
4
In order to change the volume sensitivity hold +
and – button at the same time till you hear the voice
prompt “85dB” or “94dB”
.
8. Switch Mode – 85dB / 94dB
9. HOW TO RESET THE
HEADPHONES?
Hold both Buttons for 4-7 seconds in
order to reset the bluetooth and enter
pairing regime again.