Znaleziono w kategoriach:
Czajniki elektryczne (27)
Wróć
I www.russellhobbs.com
27450-70
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
2
e
g
f
max
h
hh
h
ij
A
i
j
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved. Children shall not play with the
appliance.
Cleaning and user maintenance shall not be done by children unless they are older than 8 and
supervised.
Keep the appliance and cable out of reach of children under 8 years.
h Parts of the appliance will get hot during use.
If you overfill, the kettle may spit boiling water.
Use the kettle only with the stand supplied (and vice versa).
If the cable is damaged, it must be replaced by the manufacturer, its service agent, or someone
similarly qualified, to avoid hazard.
Avoid spillage on the stand/connector.
The surface of the heating element is subject to residual heat after use.
Use the appliance according to these instructions. Any misuse may cause potential injury, electric
shock or other hazards.
During use, the kettle should be placed on a work surface that has a minimum height of 850 mm to
prevent access by children.
i
Do not immerse in any liquid.
This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• farm houses.
• Don’t use the kettle for any purpose other than heating water.
• Don’t operate the appliance if it’s damaged or malfunctions.
PARTS
1. Filter
2. Lid
3. Lid release button
4. Stand/touch controls
5. Display
i Increase
j Decrease
u Boil/cancel
v Sound
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
4
BEFORE USING FOR THE FIRST TIME
Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust, etc.
PREPARATION AND FILLING
• Always use your kettle and stand on a stable, level surface at a height of at least 850 mm.
• When your kettle is not on its stand, or the stand is not plugged in, the display will be off.
• When your kettle is on its stand and the stand is plugged in but not in use, it will go into standby
mode and the display will be off. Pressing any button will wake your kettle from standby mode and
the display will come on.
• Unless your kettle is in keep warm mode or demo mode, after 2 minutes of inactivity, it will return to
standby mode and the display will go off.
1. Remove the kettle from the stand.
2. Open the lid.
3. Fill with at least one cup of water, but not above max.
4. Close the lid.
5. Place the kettle back on its stand.
BOILING WATER (100ºC)
1. Plug the stand into the wall socket. Your kettle will play a welcome sound and the display will come
on.
2. To boil the kettle, press the u button.
3. The display will flash 100 three times and then change to show the actual water temperature as the
kettle starts to boil the water.
4. Your kettle will play the boil start sound and then start to bring the water to the boil. Your kettle’s
lighting will start to fade slowly up and down throughout its colour range.
5. The display will continue to show the temperature of the water as it is heated.
6. To cancel, press the u button. Alternatively, lift the kettle from the stand.
7. When heating is complete your kettle will play the boil complete sound and the lighting will turn to
warm white. Your kettle will enter keep warm mode which will keep the temperature of the water at
90ºC for 40 minutes.
8. To cancel the keep warm feature, press the u button.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to suit specific teas,
coffee and even baby food and milks. The range is adjustable from 40-100ºC in 5ºC increments.
Heating water to a precise temperature depends on several factors. One of these is the amount of water
you are trying to heat. The final temperature of a small quantity of water may overshoot the desired
temperature. If it is important that the temperature of the water is exact, we recommend using the Keep
Warm feature of your kettle which will allow the temperature of the water to stabilise naturally.
1. To select the desired temperature, press either the i or j buttons. The display will step through the
available temperatures in 5 ºC increments.
2. When you have selected the desired temperature, press the u button.
3. Your kettle will play the boil start sound and then start to heat the water. Your kettle’s lighting will
start to fade slowly up and down throughout its colour range.
4. The display will continue to show the temperature of the water as it is heated.
5. To cancel, press the u button. Alternatively, lift the kettle from the stand.
6. When heating is complete your kettle will play the boil complete sound and the lighting will turn to
warm white. Your kettle will enter keep warm mode which will keep the temperature of the water at
the temperature you have selected for 40 minutes.
7. To cancel the keep warm feature, press the u button.
5
KEEP WARM MODE
After the heating cycle has ended, your kettle will automatically enter the keep warm mode. The keep
warm mode has a memory function with the following characteristics :
• The selected audio will continue playing (unless switched off) when the kettle is lifted from the stand
and replaced again.
• The keep warm function will resume if you place your kettle back on the stand within 5 minutes
provided that the keep warm period has not expired, or the water temperature has not significantly
changed.
AUDIO SETTINGS
Your kettle can play from a selection of five soothing audio tracks.
To select an audio track:
1. Briefly press the v button.
2. The display will show I, 2, 3, 4, 5 or ‐ to indicate which track is selected.
3. Press either the i or j buttons to cycle through the available tracks. A 10 second sample of the track
will play.
4. When you have chosen the desired track, press the v button. If no button is pressed for 3 seconds,
the currently selected track will be used.
To change the volume:
1. Press and hold the v button for 2 seconds.
2. The display will show the current volume—for example, “u5“. To increase or decrease the volume,
use the i or j buttons.
3. Press the v button to confirm the setting. If no button is pressed for 3 seconds, the currently
selected volume will be used.
To switch off sound playback:
1. Briefly press the v button.
2. Press either the i or j buttons to select “‐“.
3. Press the v button.
SOUND/LIGHT DISPLAY
Your kettle can be set to Demo Mode which will cycle through its colour changing lighting with or without
the audio track.
To enter Demo Mode:
• Press and hold the i and j buttons simultaneoulsy for 2 seconds.
• The sound track can be changed or volume adjusted as described under AUDIO SETTINGS.
• During demo mode, the active audio track will be displayed continuously. Simply use the i or j
buttons to adjust. Press and hold the v button to adjust the volume.
To exit Demo Mode:
• Press and hold the i and j buttons simultaneously for 2 seconds.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it off. Your kettle will display “Er“.
If this happens, unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your
kettle to boil dry will shorten the life of the element.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE