Znaleziono w kategoriach:
Generatory pary (1)
Wróć
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
28570-56 I www.russellhobbs.com
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
2
e
f
i
j
l m
D
C
B
A
o
jj
k
n
r
g
o
3
Read these instructions carefully. Retain them for future use. If the appliance is transferred to another user,
these instructions must be included.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been supervised/
instructed and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be done
by children unless they are older than 8 and supervised.
• Keep the iron and its cord out of reach of children less than 8 years of
age when it is energised or cooling down.
• The iron must be used and rested on a flat, stable surface.
• When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
• Rest the iron only on the base unit.
• Do not leave the iron unattended while plugged in or standing on the
ironing board.
• Do not use the iron if it’s dropped, damaged, malfunctions or leaks.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
h The surfaces of the appliance will get hot.
8 Do not immerse in liquid. Do not use in a bathroom, near water, or
outdoors.
• Ensure the appliance is unplugged during filling and emptying.
• Do not store until appliance has cooled.
• Ensure the cable is routed securely to prevent it from overhanging or becoming a trip hazard
• Do not iron clothing while it’s being worn.
• Do not touch the soleplate, and keep away from the steam coming from it.
• Do not use the iron in the vicinity of children.
• Do not sit the base unit on a soft, carpeted, or upholstered surface, as this may block the vents
underneath the base unit.
• Keep the cables and steam pipe away from hot parts.
• Do not use the iron for any purpose other than those described in these instructions.
• Take care not to scratch the soleplate – avoid buttons, zips, etc.
• The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will
stop working, and must be returned for repair.
HOUSEHOLD USE ONLY
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
4
DIAGRAMS
1. Power Button
2. Lo/Hi Button
3. Calc Button
4. Iron Docking Lock
5. Reservoir Tank
6. Docking Plate
7. Iron Cable storage
8. Mains Plug Storage
9. Air release valve
10. Iron Rest
11. Steam Trigger Switch (not shown)
BEFORE FIRST USE
• Remove any labels, stickers or packaging from the appliance.
• Before using the iron for the first time, or if it’s not been used for a long time, iron a scrap piece of
cotton (an old towel is ideal) to remove any accumulated residues.
• Note: It is normal for the iron to emit a bit of smoke initially—this will stop shortly as any
manufacturing residues burn off
• Note: You may notice a small amount of water in the tank during initial use. This is a result of quality
control testing and is normal.
FILLING/REFILLING
Do not use water with any additives. This will reduce the longevity of the appliance.
1. Remove the reservoir by pulling it away from the body of the steam generator using the indented
grips on the side of the Reservoir Tank (5) (Fig A).
2. Fill the reservoir to the max mark. Do not exceed the max mark.
3. Refit the Reservoir Tank (5).
USE
• Slide the Iron Docking Lock (4) to the unlock position.
• Remove the Iron and the Iron Rest (10) from the Docking plate (6).
• Seat the Iron Rest (10) on a flat and stable surface.
• Rest the Iron on the Iron Rest (10).
• Plug into the mains.
• Press Power Button (1) on the iron to switch on the appliance. The Lo/Hi Button (2) will flash until
default mode (Low) has reached operating temperature.
• Note: By default, the iron will go into Low power mode.
HEAT SETTINGS
This steam generator has 2 SimplySet™ heat settings. By default the iron will be on the low setting when
switching on.
• Press
Lo/Hi Button (2) once to switch to HI.
• Note: This is a mode switch that will toggle between modes on each press.
Lo/Hi Button Flash
Lo Blue
Hi Red
Once the temperature has been reached the light will remain illuminated.
This will take 30-60 seconds
after you rst switch on your steam station.
5
Heat setting Clothing Label marking
Lo j cool – nylon, acrylics, polyester
Lo k warm – wool, polyester mixtures
HI l hot – cotton, linen
i do not iron
Tips:
Check for textile care symbols (i j k l)..
Iron fabrics needing low temperatures first, then those that need medium temperatures , and finish with
those needing high temperatures (or max).
If the instructions on the fabric label differ from this guide, follow the instructions on the label.
STEAM TRIGGER
Trigger Position Status Action Function
Forward Unlocked Press + Hold Continuous Steam
Back Locked / Continuous Steam
Forward Unlocked Press + Hold (x2) Steam Shot
Note: Steam Shot can be activated every 10 seconds.
STEAM IRONING
1. Set the temperature control to HI
2. Squeeze the steam trigger to produce steam, release it to stop.
Note: When you rst start your steam generator and pull the trigger for steam ironing, there will be
a delay as your steam generator pumps water from the reservoir to prime the system. This is normal
and may take 20-30 seconds. This will also occur after relling the reservoir.
DRY IRONING
You can dry iron by just not pressing the steam button, but if you want to make sure you do not press it
accidentally, then you should iron with an empty reservoir. You can do your dry ironing first, then switch
off, fill the reservoir and do your steam ironing.
VERTICAL STEAMING
Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
• Check that there is adequate ventilation behind the fabric, otherwise moisture may build up, causing
mildew.
• Ensure there is nothing behind the fabric that may be damaged by the steam.
• Ensure that pockets, turn-ups, and cuffs are empty.
1. Check that the temperature control is at HI
2. Hold the iron close to (but not touching) the fabric. Hold it well away for delicate fabrics.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE