Znaleziono w kategoriach:
To reduce the risk of injury, adult supervision is required. Before your first ride, for your
safety there is a speed limit on the device. The initial speed is limited to 3.1 mph (5 km/h)
with the indicator color red and a buzzer warning sound. Please be sure to scan the QR code
on the kickscooter to learn how to fully activate it.
CE.00.0052.06-A
User Manual
Ninebot eKickScooter ZING A6
Rysunek służy wyłącznie do celów ilustracyjnych. Faktyczny produkt może
wyglądać inaczej.
01 02
Indicator
The color of the indicator shows the battery level or abnormality.
Note: When the battery level is below 10%, the indicator will stop flashing.
The flashing way of the indicator shows dierent speed mode.
Prompt Indication
Power button:
Place a single foot on the footboard to start the kickscooter, then you will hear one beep as the
prompt. Take both feet o the footboard for 30 seconds and the kickscooter will automatically power
o.
Rear fender:
● Switch speed mode: In the power-on state, when the kickscooter is still, step the rear fender twice
to switch the speed mode.
● Brake: When riding, step on the rear fender to brake.
Thanks for choosing the Ninebot eKickScooter (referred to as the kickscooter in this manual)!
The kickscooter is specially designed for smooth and safe riding. It combines the power of electricity
and the style of a traditional kickscooter. Enjoy an effortless gliding experience on this cool kickscooter.
1. Parts and Functions
Footboard/Power button
Ambient light
Front wheel
Hub motor
Clamp
Charging port
Handlebar
Indicator
Rear fender
Reflector
Stem
Accessories:
Battery charger 3/16″(5 mm) Allen wrench
Battery level
Indicator color
≥ 10%
white
< 10%
red
Not activated or abnormality alert
red
Speed mode
Max. speed
Indicator
First-gear speed
5.0 mph (8 km/h)
solid, with 1 beep
Second-gear speed
6.2 mph (10 km/h)
blink slowly, with 2 beeps
Third-gear speed
7.5 mph (12 km/h)
blink fast, with 3 beeps
State
Not activated
Battery temperature too high
Battery temperature too low
Speed＞7.5 mph (12 km/h)
Battery level: ＜ 10%
Pull out and plug in the charger
Power on
Power off
Prompt
3 short beeps (continuously)
2 short beeps and 1 long beep (continuously)
2 short beeps and 2 long beeps (continuously)
2 long beeps (continuously)
2 short beeps
1 short beep
1 short beep
1 long beep
03 04
2. Riding Safety ● Never use in roadways, near motor vehicles, near steep inclines or steps, swimming pools or other
bodies of water. Avoid construction sites, sudden surface changes, drainage grates, potholes,
cracks, hydrants, parked cars, speed bumps and other obstacles. Don’t ride on loose grounds
(such as rocks, gravel or sand).
● Do not ride in extreme temperature conditions or in low visibility, such as at dawn/dusk or at
night. Do not ride in the snow or in the rain. Submersion in water may cause battery damage,
catch fire or even explode.
WARNING
If the kickscooter makes an abnormal sound or signals an alarm, stop riding immediately. When
riding, keep your hands on the handlebar at ALL TIMES and DO NOT ride with one hand or one
foot.
Before riding:
To avoid accidental injuries, the rider's guardian should check the following matters before each ride:
● Vehicle body and tire state, etc. Ensure that any part including handlebar, stem, rear fender,
screws are not loose or damaged.
● Battery power: When the indicator light turns red, it means the kickscooter does not have enough
power to maintain normal riding. Please charge in time to avoid possible danger.
When Riding:
● One rider ONLY!
● Always wear a helmet and other protective gear (such as elbow pads and knee pads) when riding
the kickscooter. Use an approved bicycle or skateboard helmet that fits properly with the chin
strap in place, and provides protection for the back of your head.
● DO NOT bypass. Slow down when entering unfamiliar areas. Use caution when riding in areas with
trees, posts, or fences. Always slow down when turning.
● Be alert and aware of the surroundings both far ahead and in front of you when riding. Your eyes
are your best tool for safely avoiding obstacles and low traction surfaces (including, but not
limited to, wet ground, loose sand, loose gravel, and ice).
The product is for recreation only. It is not intended for transportation. Do not modify the
kickscooter in any way to change the purpose for which it was designed. In order to master riding
skills, the rider needs to practice. Use with caution since skill is required to avoid falls or collisions
causing injury to the user or third parties.
Segway parties are not responsible for any injuries, damages or legal disputes caused by a rider's
inexperience or failure to follow the instructions in this manual.
Remember that whenever you ride the kickscooter, you risk injury from loss of control, collisions,
and falls. To reduce the risk, you must read and follow all “CAUTION” and “ WARNING” notices.
Please understand that you can reduce the risk by following the instructions and warnings in this
manual, but you cannot eliminate all the risks. Please use common sense when riding.
The assembly and adjustment should ONLY be done by adults. The kickscooter contains small
parts which can pose a choking hazard. To avoid suocation, do not allow children to touch plastic
covering. Children must always be under parental supervision.
DO NOT allow anyone to ride the kickscooter on his/her own unless the supervising adults, have
carefully read this manual. It is the supervising adult's responsibility to assure the new rider's
safety. Assist new riders until they are familiar with the basic operation of the kickscooter. The
rider must wear a helmet and other protective gear. When you give the product to others, please
deliver the User Manual together.
WARNING
Protective equipment should be worn. Not to be used in traffic. Never hitch a ride with another
vehicle. DO NOT ride in rain or through puddles. Not for children with a body mass of more than
40 kg.
Riding Surfaces and Environment:
● This kickscooter is designed for riding on flat, dry, paved surfaces. Please ride in an open outdoor
space. Make sure there are no children, pedestrians, pets, skateboards, bikes, kickscooters, other
riders or potential obstacles in your surroundings.
1
2
3
4
5
05 06
● It is recommended to conduct regular maintenance of the kickscooter (see Maintenance ).
● Please read the User Manual before charging the battery (see How to Charge).
WARNING
● Only use the original charger. Do not charge when the battery is wet or damaged.
● Never allow your child to touch any vehicle parts with gaps such as rear fender, wheels, etc. Do
not touch the brake or hub motor after riding, so as to avoid burns due to increased temperature.
● Avoid sudden acceleration and deceleration. Never ride faster than the designed top speed (the
top speed can be aected by rider weight, battery level, incline, etc.). As with other vehicles, faster
speeds require longer braking distance. Sudden braking on low traction surfaces could lead to
wheel slip or falls. Be cautious and always keep a safe distance between you and others when
riding.
● Keep both hands on the handlebar and do not carry cargo of any kind. DO NOT use a cell phone,
camera, headphones, earbuds or perform any other activities while riding. DO NOT ride downhill.
● Do not touch moving or spinning wheels. Keep your hair, clothing, or similar articles from coming
in contact with the moving parts.
● Please get o the kickscooter and walk along with it when you encounter special road surfaces
such as speed bumps and potholes.
Who Should Not Ride:
I. Anyone under the influence of alcohol, drugs, or intoxicants.
II. Anyone who suffers from diseases (especially in the head, heart, back and neck) that put them at
risk if they engage in strenuous physical activity.
III. Anyone who has a health condition that would interfere with their ability to maintain balance.
IV. Anyone whose age, height and weight is outside the stated limits (see Specifications).
V. Those with compromised mental abilities who cannot understand the risks and proper operation
of the vehicle.
Safe Use:
● Do not ride the kickscooter when the ambient temperature exceeds the operating temperature of
the product (see Specifications), because low/high temperatures can decrease vehicle
performance and even lead to accidents.
● Always park with the kickstand on a flat and stable surface. Once the kickscooter is on its stand,
check its stability to avoid any risk of falling (by slip, wind or slight jolt). Do not park in a busy area,
but rather along a wall.
07 08
WARNING
Always wear a helmet and other protective gear to minimize any possible injury in the learning
process. To reduce the risk of injury, adult supervision is required.
WARNING
Please check to make sure the kickscooter is powered o before assembly.
Note:
The screw should be placed behind.
Note:
For your safety, the hub motor will
not start if the speed is less than
1.2 mph (2 km/h).
In the power-on state, when the
kickscooter is still, you can step on
the rear fender twice to switch the
speed mode.
Please scan the QR code to learn how to activate the vehicle before riding, otherwise the vehicle
speed will be limited to 3.1 mph (5km/h).
16+ years
≤88 lbs (40 kg)
3'5''–4'7'' (105–140 cm)
Activation
Switch Speed Mode
3. Assembly and Activation
Insert the stem to the bottom and adjust
the handlebar direction to be perpendicular
to the front wheel.
1Start up: Place a single foot on the footboard to start the kickscooter, then you will hear one
beep as the prompt.
2Cruise: Hold the handlebar firmly with both hands and kick to start up. During the cruising,
place both feet on the footboard and keep your balance.
4. Learn to Ride
2Tighten the two screws on the clamp to
make sure it is securely installed.
* When the indicator light turns red, please charge immediately.
NOTE:
The logo at the
wheel faces
forward.