Znaleziono w kategoriach:
Prostownice (2)
Wróć
SAFETY | WARRANTY | TROUBLESHOOTING
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions
should always be followed, including the following:
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
WARNINGS: KEEP AWAY FROM WATER
DANGER—
As with most electrical appliances, electrical parts are electrically live even when the switch is o.
WARNING
To reduce the risk of death by electric shock:
1. Always unplug the unit immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, unplug the unit immediately. Do not reach into the water.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or individuals
with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments
not recommended by the manufacturer.
®
SilkiPro
Straight
ENGLISH
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it
has been dropped, damaged, or dropped into water.
5. Keep the cord away from heated surfaces.
6. Do not wrap the cord around the appliance.
7. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch,
where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
8. Never use while sleeping.
9. Never drop or insert any object into any opening.
10. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen
is being administered.
11. Do not use an extension cord with this appliance.
12. Do not direct hot air toward eyes or other heat-sensitive areas.
13. Attachments may be hot during use. Allow them to cool before handling.
14. Do not place appliance on any surface while it is operating.
15. While using the appliance, keep your hair away from the air inlets.
16. Do not operate with a voltage converter.
17. Only use the appliance with the voltage, frequency and power shown on the rating label on
the product.
18. Do not use this appliance on hair extensions or wigs unless recommended by the hair extension
or wig manufacturer.
19. If hair styling product is being used in conjunction with this appliance please read and follow
all of the hair styling product safety warnings and instructions before use.
TECHNICAL SPECIFICATIONS Voltage: 220-240V 50-60Hz | Power 1000W
© 2025 Shark Ninja Operating LLC: SHARK are registered
trademarks in the European Union of SharkNinja Operating LLC.
HT400EU_MP_Warning Insert_TP_Mv5
For accessories and replacement
parts, visit sharkclean.eu
SCAN QR CODE FOR FULL INSTRUCTIONS,
WARRANTY INFORMATION, AND HOW-TOS
Do not use this appliance
near bathtubs, showers,
basins or other vessels
containing water.
SAVE THESE INSTRUCTIONS
20. In a double-insulated appliance, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated appliance, nor should a means of
grounding be added to the appliance. Servicing a double-insulated appliance requires extreme
care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated appliance must be identical to the parts they replace.
A double-insulated appliance is marked with words “DOUBLE INSULATION” or “DOUBLE
INSULATED.” The symbol (square within a square) may also be marked on the appliance.
ENGLISH
For further operating instructions,
scan the QR code on the cover of this booklet.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or wrapped around any
nearby objects when in use.
• Store the styler in a dry location away from water and other
heat sources.
• Clean the filter at the bottom of the styler monthly. To clean the
filter, first slide the filter cover o the bottom of the styler. Then
use a new toothbrush to brush o any dust or debris on the filter.
Once the filter is clean, slide the filter cover back on the styler
until it clicks in place.
• Remove any hair from the comb after every use to help maintain
performance.
• To maintain the styler’s performance, wipe the plates with a
warm cloth to remove any hair-product residue. Do not wipe
when plates are hot.
OPERATING INSTRUCTIONS
1. Turn the styler on and o by toggling the 3-position switch.
Wet Hair drying and styling is at the top of the toggle and
Dry Hair styling is in the middle of the toggle.
2. Adjust the airflow. Pressing the button allows you to choose
low, medium, or high airflow. In Dry Hair styling mode, you
can turn the airflow o entirely if desired by pressing the
button until none of the LED lights are illuminated.
3. Adjust the temperature. Pressing the button allows you to
choose no heat, low, medium, or high temperature.
4. To insert either the Wide Tooth Comb, Precision Comb, or the
Gentle Comb into the styler, line it up with the tracks next to
the plates and gently push. The comb is properly attached
when it clicks into place. To remove the comb, use your
thumb to pull the comb out of the tracks until it is released.
Do not insert or remove the comb when the plates are hot.
Air + Plate Temperatures
TEMP WET MODE DRY MODE
HIGH 248°F / 120°C 428°F / 220°C
MEDIUM 230°F / 110°C 374°F / 190°C
LOW 212°F / 100°C 320°F / 160°C
1
2
3
4
5. To remove the filter cover, slide it o the bottom of the styler.
To attach the filter cover, slide it back onto the bottom of the
styler until it clicks in place.
6. Press the ALCI button to reset the styler. See Troubleshooting &
Error Codes for more information.
7. Rating label location. 5
7
6
ENGLISH
OVERHEATING
ERROR CODE
TROUBLESHOOTING & ERROR CODES
MAINTENANCE/CLEANING
Before cleaning any part of the styler,
turn o the device and unplug it.
Reduction in Airflow.
Make sure you are not covering the filter
cover with your hand when operating the styler.
This will block the air inlet, which could cause
a reduction in airflow. A change in airflow or
air power, airflow blockages, and/or visible
buildup on the inlet at the bottom of the unit
could also indicate the unit needs to be cleaned.
To maintain performance, clean the filter at the
bottom of the styler every month using a new
toothbrush.
Removing the Filter
1. Turn o the styler and unplug it. Slide the filter
cover o the bottom.
Cleaning the Filter
1. Wipe the filter thoroughly with an alcohol pad,
then allow it to air-dry completely for 5 minutes
before use.
2. To reinstall the filter cover, slide it back on
to the bottom of the styler until it clicks into
place.
Cleaning the Combs
1. Remove any hair from the comb after every use
to help maintain performance.
2. Use lukewarm water, a mild detergent, and a
soft toothbrush to gently scrub the comb.
3. Rinse thoroughly with fresh water and dry with
a soft, microfiber cloth.
Cleaning the Plates
1. Unplug styler and allow to cool down. Use a
soft cloth or paper towel to wipe away any
loose hair or product buildup from the plates
after every use to maintain performance.
2. Use a warm cloth to clean the plates, especially
if there’s product buildup on them.
ALCI OPERATION
Electricity flickers or trips circuit breaker
during use.
This unit is equipped with an Appliance Leakage
Circuit Interrupter (ALCI), a safety feature that
renders it inoperable under abnormal conditions.
Should the unit turn o in use, press the red Reset
button on the plug and the unit should function
normally. If the unit does not reset, please check
your circuit breaker. If the issue persists, ensure
there are no other appliances plugged in within the
room where the unit is being used. Do not use the
unit with a power strip.
OVERHEATING
Styler is overheating or shuts o.
This unit is equipped with a temperature-
protective thermostat. If for some reason your
unit overheats, the thermostat will automatically
turn the unit o. To prevent power-down
recurrence, unplug the unit and set it aside
to cool. Overheating may result if the unit is
powered on for a long duration, or can indicate a
blockage or dust buildup. To prevent overheating,
clean the filter at the bottom of the unit every
month, using a new toothbrush. Make sure you
are not covering the filter with your hand when
operating the unit, as this could also cause
overheating. If overheating continues to occur,
contact Customer Service at
855-522-0912.
If you are experiencing a dierent error code, please
scan the QR code
for additional troubleshooting or contact Customer Service at
855-522-0912.
ENGLISH
2 YEAR LIMITED GUARANTEE
When a consumer buys a product in
Europe, they get the benefit of legal rights
relating to the quality of the product (your
statutory rights). You can enforce these
rights against your retailer. We give you an
additional manufacturer’s guarantee of 2
years. These terms and conditions relate
to our manufacturer’s guarantee only –
your statutory rights are unaected.
The conditions below describe the prerequisites
and scope of our guarantee. They do not
aect your statutory rights or the obligations
of your retailer and your contract with them.
Shark Guarantees
Every Shark product comes with a free
parts and labour guarantee. You’ll also
find online support at sharkclean.eu
How do I register my Shark guarantee?
You can register your guarantee online within
28 days of purchase. To save time, you’ll need
the following information about your product.
• Date you purchased the product (receipt or
delivery note).
• To register online, please visit sharkclean.eu
IMPORTANT
• The guarantee will only cover your
product from the date of purchase.
• The free Shark guarantee is only valid in the
country where the product was purchased.
• Please keep your receipt at all times.
Should you need to use your guarantee
we will need your receipt to verify the
information you have supplied to us is
correct. The inability to produce a valid
receipt may invalidate your guarantee.
What are the benefits of registering
my free Shark guarantee?
When you register your guarantee we’ll have
your details to hand if we ever need to get in
touch. You can also receive tips and advice
on how to get the best out of your Shark
product and hear the latest news about new
Shark technology and launches. If you register
your guarantee online, you’ll get instant
confirmation that we’ve received your details.
What is covered by the free Shark guarantee?
Repair or replacement of your Shark product
(at Shark’s discretion), including all parts
and labour. A Shark guarantee is in addition
to your legal rights as a consumer.
What is not covered by the
free Shark guarantee?
1. Normal wear and tear of wearable parts
(such as accessories). Replacement parts
are available for purchase at sharkclean.eu
2. Damage caused by misuse, abuse,
negligent handling, failure to perform
required maintenance or damage
due to mishandling in transit.
3. Damage caused by maintenance
not authorised by Shark.
Where can I buy genuine Shark
spares and accessories?
You’ll find a full range of Shark spares
and replacement parts/accessories for
all Shark products at sharkclean.eu
Please remember that damage caused
by the use of non-Shark spares may not
be covered under your guarantee.
ENGLISH