1
USER MANUAL
TESLA SMART
SENSOR WATER
EN
SK
SL
DE
PL
CZ
HU
2
Product Description
Status indicator
Button
Sensing probe
3
Network Setting
1. Power on the product.
Insert a thin blade or coin into the slot on the battery
cover and rotate it counterclockwise to open the
battery cover.
Remove the battery insulation film to power on the
product and close the battery cover.
CR 2032
CR 2032
4
2. Press the reset button for 5S and release, the green
LED will flash for network setting.
Device pairing Hint:
Press the reset button for 5s-10s, the green LED is on, once
green LED turns off, release the reset button, the green
LED flashes, means ready for network setting.It keeps on
flashing for 20s during network setting.If pressing for more
than 10s, network setting cancelled.
The green LED will be on for 5s to indicate network setting
succeeds. If fails, the greenLED is off.
Press the reset
button for 5s
then release.
5
Installation Instructions
Place the product in the detection area.
Device pairing Hint:
Press the reset button for 5s-10s, untill the green LED
starts to flash.
In Tesla Smart app, locate your Gateway,click on „
Add subdavice“ and follow the instruction
Bottom view