Znaleziono w kategoriach:
1
USER MANUAL
TESLA SMART
SENSOR BUTTON
EN
SK
SL
DE
PL
CZ
HU
2
Product Description
Status indicator
Linkage Setting (Detail please
refer to APP)
•Single click
•Double click
•Long press (LED off after 3s,
release the button)
Emergency
button
Reset
button
3
CR2032
CR2 032
Network Setting
1. Power on the product.
Insert a thin blade or coin into the slot on the battery
cover and rotate it anticlockwise to open the battery
cover.
Remove the battery insulation film to power on the
product and close the battery cover.
4
2.Press the reset button for 5S and release, the red
LED will flash f or network setting.
Use a pin to press the button for 5s.
Network Setting Note:
Press the reset button for 5s-10s, the red LED is on
for 5s then turns off, release the reset button for
network setting. During network setting, LED keeps
on flashing for 20s. If pressing for more than 10s,
network setting cancelled
The red LED will be on for 5s to indicate network
setting succeeds. If fails, the red LED is off.
5
3M
3M
Installation Instructions
Method 1: Directly place the product in the target
position.
Method 2: Remove the protective film from the ad-
hesive and attach the product to the target position.