1
USER MANUAL
TESLA
SMART CAMERA 360
4G BATTERY
EN
CZ
SK
PL
HU
SL
DE
2
WHAT‘S IN THE BOX
• TESLA Smart Camera 360 4G Battery
• Screw package
• SIM ejection pin
• User manual
• USB-C power cable
Microphone
Lens
SIM/SD tray
ejection button
SIM/SD Slot
Speaker
ON/OFF Button
USB-C Port
RESET Button
Status light
PIR Sensor
Charging port DC 5 V / 1 A
ON/OFF Button Press the button for 5 seconds to turn on/off the
camera.
Status light • The camera is connection to the 4G network:
Flashing red (500 ms).
• Pairing with app: After successfully loading the SIM
and connection to the 4G network, status light flashes
blue (500 ms) and camera is ready for pairing with app.
• Camera error: Status light is flashing red/blue.
• FW updating: Flashing blue (250 ms).
SD Card slot Support local SD Card storage (Max.128 GB)
Reset button Press and hold on for 5 seconds to reset the camera.
Battery 9600mAh rechargeable Li battery
3
INSTALLATION
CAMERA INSTALLATION
1) Mark screws position with bracket
2) Drill screw holes with a power drill
3) Install expansion screws (with a hammer)
4) Use screws to fix the bracket on the wall
30~40MM
6MM
Before installation, please check that the installa-
tion positions will not affect the connection and
usage, especially to ensure that the solar panel
can be fully illuminated, and the camera is in good
coverage of mobile data signal.
4
SIM/SD CARD INSTALLATION
1. Insert the SIM card first to the SD card slot, so that the
camera can connect to 4G Internet.
2. Then insert SD card for data storage.
SD card
SIM card
5
CONNECTION
Download
Tesla Smart is available for both iOS and
Android OS. Search the name ‚Tesla
Smart‘ in App Store or Android Market, or
scan the QR-Code to download the App.
REGISTRATION PROCESS
Step 1 Open the Tesla Smart App, click „Register“, read the
„Privacy Policy“ and click „Agree“ .
Step 2 Input a legal and valid Mobile number or Email address
and click „Continue“. Input Verification Code, then log in the
app.
QR CODE CONFIGURATION
1. Open the Tesla Smart App, click „Create family“, and you can
customize the Family name and related settings.
2. Continue to click „+“ >> „Scan QR Code“.
3. Make sure the LED is blinking blue (500 ms) and scan the QR
code, fount on the top of the camera. The connection usually
takes a few seconds.
SETTINGS
In „Smart Camera“ interface,click „ “, you can set the camera
common functions.