Znaleziono w kategoriach:
Kamera TRUELIFE NannyCam V24

Instrukcja obsługi Kamera TRUELIFE NannyCam V24

Powrót
1
INSTRUCTIONS FOR USE
NannyCam V24
1
PACKAGE CONTENTS:
Parent Unit (with display) + power adapter
Baby Unit (camera) + power adapter
Instructions for Use
BABY UNIT OVERVIEW:
1. Light Sensor
2. Camera Lens
3. Blue LED Power Indicator
4. Microphone
5. Infrared LED for night vision
6. Power Adapter Connector
7. Thermal Sensor
8. Reset Button for pairing
9. Speaker
PARENT UNIT OVERVIEW:
1. Power Input / Battery Charging
2. LCD Display
3. Red LED – indicates activity
4. Blue LED - indicates connection
with camera
5. Microphone
6. Volume - / Left Arrow
7. Melody (on/o)
8. PTT Key (push-to-talk)
9. Volume + / Right Arrow
10. OK / Menu Key
11. Power Key (screen on/o) / Return
(back)
12. Speaker
13. Return / Back Key
13
2
GETTING STARTED:
A) Baby Unit (camera)
1. Connect the small plug of the power adapter to the baby unit and the other end to the
mains socket.
2. The blue LED indicates the camera is functioning correctly.
Note: Baby Unit requires a constant connection to the mains.
B) Parent Unit (display)
1. Connect the small plug of the power adapter to the parent unit and the other end to
the mains socket.
2. Parent unit begins charging, indicated by the red LED and the battery recharging sym-
bol on the display.
3. Press the power key to turn the display on.
Note: For optimal capacity and battery life, fully charge the device before using for the
rst time.
3
SETUP AND FUNCTIONS:
When the parent and baby units are switched on and within range, a live image from the
camera will appear within a few seconds.
Place the camera in a suitable location and adjust the camera lens until you are satised
with the image on the parent unit.
Note: Do not place the baby unit within babys reach. If there is interference on the picture
or sound, try moving the units to dierent locations, and ensure they are not close to other
electrical equipment that may interfere with the transmission.
Monitoring Screen Icons
1. Signal strength indicator
2. Temperature in babys room*
3. Melody is playing
4. VOX function activated
5. Alarm activated
6. Battery indicator
7. Microphone activated (push to talk)
8. Date and time
Note: *The baby monitor thermometer is not certied and the temperature data should
only be used as a general guideline.
Range
When the distance between the baby and parent unit is too far, the signal may be interrup-
ted and the image and sound may become frozen. If there is a connection loss due to the
units being out of range, a black screen is displayed and the message “Connecting. The
parent unit will try to reconnect to the camera.
Note: If the they do not reconnect even after the units have been brought within range, try
to pair the units again, see the following section “Camera – Pairing.
Powering a video baby monitor via a power bank
A TrueLife video monitor is primarily intended for home use and to be powered from the
mains. Do not use VOX power saving mode when using a power bank. In this mode, the
electrical consumption of the camera (baby unit) is so low that some power banks might
think the device is charged and turn o automatically. This will interrupt transmission.