Znaleziono w kategoriach:
AIR PURIFIER
Model: T800 (AT8U457-NWE)
User Manual
EN
AIR PURIFIER User Manual
FR
PURIFICATEUR D'AIR Manuel d’utilisation
ES
PURIFICADOR DE AIRE Manual de usuario
DE
LUFTREINIGER Bedienungshandbuch
IT
PURIFICATORE D'ARIA Manuale dell'utente
NL
LUCHTREINIGER Gebruikershandleiding
PL
OCZYSZCZACZ
POWIETRZA
Instrukcja obsługi
SE
LUFTRENARE Bruksanvisning
TR
HAVA TEMİZLEYİCİ Kullanıcı Kılavuzu
• Please read and follow all safety rules and instructions in this
manual before operating.
• The product warranty is printed on the back of this guide, so
please keep it in a safe place for future use.
Use & Care
Guide
English
English
2
Before operating this equipment, carefully read and
follow these safety cautions.
Ensure filters are inserted before running unit
Running the unit without filters may shorten the
lifespan of the unit and cause electric shock or
injury.
Be sure foreign objects are NOT inserted into the
vents on the unit
Objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with
wet hands
The high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become
blocked
Blockage may lead to increased internal
temperatures causing product failure and
deformation.
Do not use the unit as a step stool or place heavy
objects on it
Personal injury may occur or product failure and
deformation.
When turning the product upside down, install the
filter with care in the direction so that the bottom
(blocked) side of the filter is visible from the top
If the filter direction is not installed properly, it may
cause product damage and user injury.
WARNING
Follow these instructions to reduce the risk of
serious injury or death and to reduce risk of
damaging the unit.
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved.
Children should be supervised to ensure
that they do not play with the appliance.
Cleaning and user maintenance shall not
be made by children without supervision.
Before cleaning or maintaining, ensure
unit is unplugged.
Do not pull on the power cord when
unplugging the unit.
Do not tie or knot the power cord when
unit is in operation.
If the unit becomes submerged in water,
unplug it and contact customer service.
Do not unplug or move the unit while in
operation.
Do not plug additional appliances into
the same outlet or power supply.
Do not touch the plug with wet hands.
Unplug the unit when not in operation for
extended periods of time.
Do not place around heating elements.
Do not use around mist or fumes from
industrial oil or around large quantities
of metallic dust.
The cord can become damaged by
forcefully bending, pulling, twisting,
bundling, pinching or placing heavy
objects on it.
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships,
etc).
Do not place in an area with excessive
amounts of noxious gases.
Do not place near any flammable
materials (aerosols, fuel, gases etc).
Do not have the unit facing into wind or
drafts.
Do not place below any electrical outlet.
Do not place in excessively humid areas
where the unit may become wet.
To reduce the risk of fire or electric
shock, do not use this fan with any solid-
state speed control device.
Do not place unit closer than 30 cm
from the wall during operation. It may
cause condensation to the wall and the
surrounding area.
If a product is delivered and/or installed
during the winter season, there may be some
condensation inside the sensor because
of the indoor and outdoor temperature
differences. This might cause a temporary
reading of 5μg/m³ dust concentration and a
blue light maintenance indication.
Please use it with confidence as it
will disappear after running for about
1-2 hours during initial operation.The
minimum value of dust concentration
displayed on the product is 5 μg/m
3
.
SAFETY AND CAUTIONS
English
English
3
Read and save these instructions.
Thank you for purchasing a Winix air purifier.
IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER
WARNING : Follow the instructions in this manual to reduce the risk of electric shock, short circuit,
and/or fire.
• Do not repair or modify the unit. All
repairs should be completed by a qualified
technician.
• Do not use if the power cord or plug is
damaged or the connection to the wall
outlet is loose.
• Use AC 220 - 240 V only.
• Do not damage, break, forcefully bend, pull,
twist, bundle, coat, pinch, or place heavy
objects on the power cord.
• Periodically remove dust from the power
plug.
This will reduce the risk of shock due to
humidity build up.
• Remove the power plug from the outlet
before cleaning the unit. When removing the
power plug, grasp by holding the plug itself,
never hold by the cord.
• If the power plug is damaged, it must be
replaced by the manufacturer or a qualified
technician.
• Remove the power plug from the outlet
when not in use.
• Do not handle the power plug with wet
hands.
• Do not operate the unit when using indoor
smoke-generating insecticides.
• Do not clean unit with benzene or paint
thinner.
• Do not spray insecticides on the unit.
• Do not use the unit where it is humid or
where the unit may become wet, such as the
bathroom.
• Do not insert fingers or foreign objects into
air intake or outlet.
• Do not use the unit near flammable gases.
Do not use near cigarettes, incense, or other
spark-creating items.
• Unit will not remove carbon monoxide
emitted from heating appliances or other
sources.
• This appliance is not intended for use by
children or other persons without assistance
or supervision if their physical, sensory or
mental capabilities prevent them from using
it safely. Children should be supervised
to ensure that they do not play with the
appliance.
• Do not block the intake or outlet vents.
• Do not use near hot objects, such as a
stove.
• Do not use where the unit may come into
contact with steam.
• Do not use the unit on its side.
• Keep away from products that generate oily
residue, such as a deep fryer.
• Do not use detergent to clean the unit.
• Do not operate without a filter.
• Do not wash and reuse the New All-in-One
HEPA Filter GR.
• Hold the handle on the back of the unit to
transport.
• Do not hold by the front panel.
• Do not stick any small objects in the air
outlet vents or fan.
SAFETY INSTRUCTIONS
IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER
English
English
4
MODEL PART DIAGRAM
WHERE TO USE
FRONT
BACK
Control Panel
Front Panel
Handle
Power Cord
Air Outlet Vent
PACKAGE CONTENTS
Unit
New All-In-One HEPA
Filter (99,999%).
WINIX Filter GR
Quick-set-up
Manual
Wi-Fi Setup
Guide
Smart Sensor
12~18 in12~18 in12~18 in12~18 in
30 ~ 45 cm 30 ~ 45 cm
Allow 30 ~ 45 cm. of space between TVs, radios,
humidifiers, and other electronics
It can cause malfunction due to electromagnetic
interference and humidified water.
Place indoors away from direct sunlight
Direct exposure may cause product malfunction or
failure.
Only place on hard, flat surfaces
Flimsy or slanted surfaces may result in abnormal
noise and vibrations.
Allow 30 ~ 45 cm from walls
For maximum air flow.
English
English
5
CONTROL PANEL
01. Filter Life / Filter Reset Button
• A quick press will show the remaining filter life:
indicated on the front display (F99 ~ F00).
• A long press of 5 seconds will reset the filter life
indicator.
- Use when replacing the filters.
- Filter Reset Button can be used when the
power is turned off.
- The filter life will be reset to 100%.
02. Light Mode Button
Use the light button to set the desired display
brightness. The display brightness cycles in the
order of 100% 70% 30% OFF. Other features
remain unchanged.
03. Fan Speed Indicator Buttons
Indicates the current fan speed.
• Use the Fan Speed arrow buttons to set the
desired fan speed. Fan speeds cycle over in this
sequence:
Auto, Low, Medium, High, Turbo.
04. Auto Mode Button
The Air Purifier will operate in the Auto Mode and
with PlasmaWave enabled when first powered on.
• Auto Mode automatically adjusts fan speeds
according to your indoor air quality. The fan
speed will adjust to low when air quality is good,
medium when fair, and to high when poor. The
turbo mode can only be used manually.
05. Power Button
Turns the unit on or off. During the first 30seconds
of power, the Air Quality Indicator will cycle through
Blue, Green, Amber and Red colors.
• Smart Sensor takes approximately 4minutes to
detect the air quality in the environment before
normal operation begins.
06. Light Sensor
Detects the amount of ambient light in the
environment. When in Auto Mode, the light sensor
detects when to put the unit into Sleep Mode.
07. Wi-Fi / Pairing Button
• A quick press will turn Wi-Fi on/off.
• A long press of 3 seconds will activate pairing
mode.
• A Wi-Fi indicator will display on the front while
Wi-Fi is active.
08. Air Quality Indicator
Color coded LED light indicates one of four levels
of Air Quality: Red (poor), Amber (fair), Green
(average) and Blue (good).
09. PlasmaWave® Button
Enables or disables PlasmaWave®
When the unit is running, you may hear a chirping
or buzzing sound. The sound is from particles
passing through PlasmaWave®, it is normal and
does not signify product failure.
Press the PlasmaWave® button when the unit is on
to enable or disable this feature.
10. Mode Indicator
Indicates whether Auto & Fan Speed Mode is
enabled or disabled.
Low Medium High Turbo
11. Sleep Mode Indicator
Indicates whether Sleep Mode is enabled or
disabled.
12. Wi-Fi Indicator
Indicates whether Wi-Fi Mode is enabled or
disabled.
13. PlasmaWave® Indicator
Indicates whether PlasmaWave® is enabled or
disabled.
14. Filter Replacement Indicator
LED light indicates when it is time to change the
filter.
15. Ultrafine Dust Density Indicator
• The LED Ultrafine Dust Density Indicator
displays the quality of air in your environment.
When the unit senses an air quality change,
it automatically adjusts the LED Indicator to
display the respective air quality.
• LED Numeric Smart Sensor displays air quality
measures fine particles down to 2.5 microns.
02
05
03 03
01 07
04 09
08
06 10
13
15
14
11 12