SHAVER
BD-264
www.berdsen.pl
326400 / V. 1.1
PL
DE
CZ
HU
RO
GOLARKA
RASIERER
HOLICÍ STROJEK
HAJNYÍRÓ GÉP
APARAT DE BĂRBIERIT
2
I
1
6
11 12
7 8 9
4
2
5
3
10
3
II
III
2
2
1
1
4
EN INSTRUCTION MANUAL
Thank you for choosing a Berdsen product. This manual contains important safety,
usage, and disposal guidelines for the device. Please read the instructions carefully
before using the product and keep them for future reference.
⚠ WARNINGS!
• The device should only be operated by adults. Keep the device out of reach of child-
ren.
• Children should not play with the device. Store the product in a place inaccessible to
children.
• Do not use the device on wet hair.
• Ensure the device is dry and turned o before plugging it into the power outlet.
• Turn o the device before cleaning, replacing any attachments, or after use.
• Never pull the power cord to disconnect the device from the socket. Always hold the
plug.
• Do not use the device if the power cord is damaged. If the cord is damaged, it must be
replaced at an authorized service center.
• Do not place the cords under furniture or other obstacles.
• Protect the power cable from damage, keep it away from heat sources and sharp
edges.
• Connect the charger to an electrical outlet with voltage matching the device’s rating
plate.
• Never charge the product at ambient temperatures above 35°C or below 5°C.
• Do not leave the device unattended when it is plugged in.
• This product has a built-in battery. When the battery is low, recharge it as soon as
possible using a certied charger.
• Do not attempt to replace the battery yourself. Some battery components are am-
mable and hazardous, which could cause injury, re, rupture, or explosion.
• Do not disassemble, open, crush, or puncture the battery.
• Do not overcharge the battery. Lithium battery replacement should only be perfor-
med by authorized service personnel.
• Remember to dispose of batteries according to local regulations.
• Regularly check the device for damage. If there are any signs of damage, stop using
the device and contact an authorized service center.
• Do not modify the device or use unauthorized replacement parts. This could lead to
injury or damage to the device.
• Properly assemble the blades and attachments. Incorrect assembly may cause injury
or damage to the device.
• Before use, check that the blade or attachments are not damaged or deformed. Do
not use them if any defects are present.
• You can wash the product under running water, but make sure the charging port is
thoroughly dried before charging.
• Do not use the device on animals. The device is intended for human use only.
• Do not leave the device turned on without supervision.
• To protect the product from damage, avoid dropping or hitting it.
• Parts of this device are sharp, so use it carefully.
• Do not disassemble the product.
• Do not insert ngers or metal objects into the guard and blade. This may cause
damage to the product or injury.
• Do not press directly on the blade or strike it with a hard object, as the blade edge is
thin. This may damage the blade.
• Follow local regulations regarding the disposal of electrical devices and batteries.
5
DEVICE CONSTRUCTION (FIG. I)
1. Rotary Head
2. Power Button
3. Battery Indicator
4. Charging Indicator
5. Trimmer
6. Soft Face Sponge
7. Face Brush
8. Precision Trimmer
9. Nose and Ear Trimmer
10. Comb Attachments (3 pieces: 3mm,
5mm, 7mm)
11. Cleaning Brush
12. USB Cable
OPERATION
1. To lock the device (Travel Lock), preventing accidental activation, hold the power/lock
button for about 3 seconds. To unlock the device, hold the power/lock button for 3
seconds again.
2. Press the power button to turn the device on.
3. To turn o the device, press the power button.
BATTERY CHARGING
• The battery status is displayed on the battery indicator. A red color indicates a low
battery, and charging is required.
• Use a 5V 1A charger for charging.
• When the charger is connected, the charging indicator will light up.
• The battery will be fully charged in about 2 hours.
• The runtime after a full charge is approximately 1 hour.
• Before charging, ensure that the cable ends and socket are clean and dry.
• Charge in an ambient temperature of 5-35°C. Do not leave the device in hot places
or direct sunlight during charging. After charging is complete, unplug the charger to
prevent overcharging.
HEAD ASSEMBLY (FIG. II)
1. Head Installation:
Attach the head to the shaver. For the precision head, one of the three comb attach-
ments can be mounted.
2. Head Removal:
Simply pull the head rmly.
BLADE CLEANING (FIG. III)
1. Open the rotary blade.
2. Wash the shaver with warm water and use the cleaning brush.
TECHNICAL SPECIFICATIONS
Rated Power 5 W
Input 5 V 1 A
Battery Li-Ion 3.7V 600 mAh
Charging Time 2 hours