STAGE VOCAL SET
USER MANUAL
INSTRUKCJA OBSŁUGI
ENGLISH
UHF DSP Wireless Microphone System Specification
Modulation Method: ∏/4 – DQPSK
Frequency Range: 518-542MHz, 2x100/4x50CH
Sampling Ratio: 48KHz
Transmission Rate: 204.8Kbps
Dynamic Range >90dB
Total Harmonic Distortion: <0.1%
Delay Time of Audio Transmission: <3ms
S/N Ratio: >96dB
Frequency Response: 30~20KHz
RX Sensitivity: <-94dBm
Unique ID Address: Yes
Some tips to improve the performance of the system
• The transmitter and antenna should be kept in the relative position of accessibility of the
straight line
• Don’t put the receiver close to the metal surface or near any digital device (such as CD players,
computer, etc.)
• Try to place the receiver in height of 1.5 meters from the ground and the position of a distance
of 1 meter away from the wall
1. Hand-held Transmitter
1) Main functions
2) Transmitter display content
3) Replacing the battery
2. Receiver Function
1) Front panel functions
2) Rear panel functions
3) Receiver display content
3. How to adjust the output Volume
4. How to select Frequencies/Channels for the receiver
1) Automatic Frequency/Channel select
2) Manual Frequency/Channel select
5. How to match Receiver’s frequency with Microphone
STEP1: Turn ON the microphone, point the microphone infrared port (IR) directly
at receiver’s IR PORT.
NOTE> Please make sure
that the other handheld
microphone is powered off
when adjusting the
frequency on one
microphone.
Each unit is fully tested and
qualified by the
manufacturer. However, due
to the nature of wireless
connection, interference
may occur because of local
environments and/or radio
signals emitted by other
wireless devices with the
household.
STEP 2: Press and hold “SET: unit “” displays. Once syncing is
completed, the RF level bar appears and the “MUTE” icon disappears.