Znaleziono w kategoriach:
2606164000_31-E6016_00_01_WEB 105 × 148 mm
www.emos.eu
E6016
GB Wireless Weather Station
CZ Bezdrátová meteostanice
SK Bezdrôtová meteostanica
PL Bezprzewodowa stacja meteorologiczna
HU Vezeték nélküli meteorológiai állomás
SI Brezžična meteorološka postaja
RS|HR|BA|ME Bežična meteorološka stanica
DE Drahtlose Wetterstation
UA Бездротовий метеорологічний пристрій
RO|MD Staţie meteorologică fără r
LT Belaidė meteorologinė stotelė
LV Bezvadu meteoroloģiskā stacija
EE Juhtmevaba ilmajaam
BG Безжична метеорологична станция
FR Station météo sans l
IT Stazione Metereologica Wireless
ES Estación meteorológica inalámbrica
NL Draadloos weerstation
2
40
39
41
42
43
1
2 3 4 5 6 7 8 9 10 11 1213 14
2122232425262728293031
32
33
34
35
36
37
38 15
16
17
18
19
20
3
46 47
44
45
52
50
51
49
48
4
GB | Wireless Weather Station
1 – snooze/light button
2 – number of temperature/humidity and
wind sensor 1/2/3
3 – outdoor temperature
4 – cycling through data from connected
sensors
5 – outdoor temperature trend
6 – outdoor humidity trend
7 – weather forecast
8 – moon phase
9 – pressure history
10 – pressure value
11 – pressure trend
12 – indoor temperature alert
13 – indoor temperature
14 – indoor temperature trend
15 – station batteries low
16 – indoor humidity trend
17 – indoor humidity
18 – alarm no. 1/no. 2
19 – time, DCF signal reception, daylight
savings time (DST)
20 – day of the week
21 – UP button – step forward in settings,
memory of max/min temperature and
humidity
22 – date
23 – DOWN button – step back in settings
24 – wind direction indicator
25 – CHANNEL button – searching for sensor
signal/switching through information
from connected sensors
26 – wind direction: S – south, W – west,
N – north, E – east
27 – ALARM button – alarm activation/deac-
tivation
28 – SET button – °C/°F unit of temperature
setting, function settings
29 – MODE button – display mode switching
30 – data from precipitation sensor
31 – signal from precipitation sensor
32 – low batteries in precipitation sensor
33 – wind speed
34 – signal from temperature/humidity and
wind sensor
35 – low batteries in temperature/humidity
and wind sensor
36 – outdoor humidity
37 – outdoor temperature alert
38 – low batteries in temperature/humidity
and wind sensor
39 – power adapter socket
40 – battery compartment
41 – stand
42 – alarm speaker
43 – holes for hanging on a wall
44 – precipitation sensor battery cover
45 – precipitation sensor grille
46 – wind sensor cups
47 – compass
48 – south indicator (S)
49 – temperature/humidity/wind sensor
battery compartment
Buttons: TX – send signal from sensor to sta-
tion, 1/2/3 – switch sensor channel number,
WAVE – manually activate/deactivate DCF
signal reception
50 – mounting rod (26 mm diameter)
51 – mounting base
52 – wind direction paddle
Technical specications:
clock controlled by DCF77 radio signal
time format: 12/24 h
indoor temperature: -10°C to +50°C, 0.1°C resolution
outdoor temperature: -30°C to +60°C, 0.1°C resolution
temperature measurement accuracy: ±1°C for 20°C to +24°C range, ±2°C for 0°C to +20°C and
24°C to +40°C range, ±3°C for -20°C to 0°C and 40°C to +50°C range, ±4°C for other ranges.
indoor and outdoor humidity: 1–99 % RH, 1 % resolution
humidity measurement accuracy: 5 %
displayed units of temperature: °C/°F
barometric pressure measurement range: 800 hPa to 1 100 hPa
unit of pressure: hPa/inHg
wind sensor measurement range: 0 to 127.5 km/h
unit of wind speed: km/mph
5
precipitation sensor measurement range: 0 to 2,999 mm
unit of precipitation: mm/inch
radio signal range: to 100 m in open area
number of sensors which can be connected: max. 3 (temperature/humidity/wind sensor), max. 1
(precipitation sensor)
wireless sensor: transmission frequency 433 MHz, 10 mW e.r.p. max.
station power supply: 3× 1.5 V AAA batteries (not included)
adapter AC 230 V/DC 5 V, 300 mA (included)
temperature/humidity/wind sensor power supply: 4× 1.5 V AA (not included)
precipitation sensor power supply: 2× 1.5 V AA (not included)
station dimensions and weight: 17 × 192 × 127 mm, 364 g
temperature/humidity/wind sensor dimensions and weight: 275 × 135 × 310 mm, 377 g (without
batteries)
precipitation sensor dimensions and weight: 100 × 106 × 166 mm, 220 g (without batteries)
Getting Started/Installation
1. Plug the power adapter into the station, then insert batteries rst into the weather station and then
into: wireless temperature/humidity/wind sensor and wireless precipitation sensor. The battery
compartment of the precipitation sensor is protected by screws; use a suitable screwdriver.
2. When inserting the batteries make sure the polarity is correct to avoid damaging the weather
station or sensors. Only use alkaline batteries of the same type; do not use rechargeable batteries.
3. Place all the units next to each other. The weather station will automatically detect the signal
from sensors within 3 minutes. If signal from sensors is not detected, long-press the button
on the weather station to repeat the search and press the TX button on the sensor.
4. To ensure correct measurement, the temperature/humidity/wind sensor and precipitation sensor
must be placed above the ground surface (at least 1.5 m) onto a horizontal surface and outside
of buildings and structures. Both sensors must be rmly screwed on to prevent their damag-
ing. First, screw the mounting plate onto a level surface, then mount the mounting rod into it.
Screw the temperature/humidity/wind sensor onto the rod. Wind must ow freely around the
wind sensor from all sides. Check that the wind direction indicator and paddles for measuring
wind speed can rotate freely. The north arrow (N) on the built-in compass must point to the real
north. The south indicator (S) must point south in reality. Otherwise, wind direction will always
be displayed incorrectly. When choosing a suitable place for mounting the sensor, check before
installation that the main station is within range of the sensors. The range of the sensors may
decrease substantially in areas with large number of obstacles.
5. Do not place the sensors onto metal objects as this will reduce their transmission range.
6. If the low battery icon is displayed, replace batteries in the sensors or weather station.
Changing Channel and Connecting Additional Sensors (Valid for Temperature/
Humidity/Precipitation Sensor)
1. Choose the desired channel 1, 2, or 3 for the sensor by repeatedly pressing the button. Then,
long press the button; the icon will start ashing.
2. Remove the cover from the battery compartment on the rear of the sensor and set the sensor
switch to the desired sensor channel number (1, 2, 3), then insert batteries (4× 1.5 V AA). Data
from the sensor will be loaded within 3 minutes.
3. If sensor signal is not found, remove the batteries and proceed again in accordance with steps
1 and 2 or press the TX button.
Attention:
The anemometer (wind speed and direction measurement) only functions on channel 1 (spare
sensor E06016).
Channels 2 and 3 are used for information about outdoor temperature and humidity (spare sensor
E06018).