Znaleziono w kategoriach:
Stacja pogody EMOS E5005

Instrukcja obsługi Stacja pogody EMOS E5005

Wróć
2606155000_31-E5005_00_01_WEB 105 × 148 mm
www.emos.eu
E5005
GB Wireless Weather Station
CZ Bezdrátová meteostanice
SK Bezdrôtová meteostanica
PL Bezprzewodowa stacja meteorologiczna
HU Vezeték nélküli meteorológiai állomás
SI Brezžična meteorološka postaja
RS|HR|BA|ME Bežična meteorološka stanica
DE Drahtlose Wetterstation
UA Бездротовий метеорологічний пристрій
RO|MD Staţie meteorologică fără r
LT Belaidė meteorologinė stotelė
LV Bezvadu meteoroloģiskā stacija
EE Juhtmevaba ilmajaam
BG Безжична метеорологична станция
FR Station météo sans l
IT Stazione meteo senza li
ES Estación meteorológica inalámbrica
NL Draadloos weerstation
2
3
H
CH
I
4
GB | Wireless Weather Station
Weather station E5005 displays time, weather forecast, nice environment icon, data about indoor and
outdoor temperature, humidity, atmospheric pressure, atmospheric pressure history, moon phase,
day, month, day of the week, week of the year.
It has a memory of minimum and maximum values measured and indicators for temperature,
pressure and humidity trends.
Read this manual carefully before using the product.
Weather Station Display
1 – Outdoor temperature; 2 – Outdoor temperature trend; 3 – Indoor temperature trend; 4 – Indoor
temperature; 5 Display of MIN-MAX indoor temperature and humidity; 6 Low batteries in the
station; 7 – Indoor humidity trend; 8 – Indoor humidity; 9 – Display of MIN-MAX outdoor temperature
and humidity; 10 – Outdoor humidity trend; 11 – Forecast; 12 – Low battery in the sensor; 13 – Out-
door humidity; 14 – Moon phase; 15 – Pressure history; 16 – Pressure value; 17 – Pressure trend;
18 DCF signal reception; 19 – Alarm activation; 20 – Summer time; 21 – Clock; 22 – Week number;
23 Day of the week; 24 – Month; 25 – Day; 26 Temperature alert activation; 27 Cycling of values
from sensors 1/2/3; 28Outdoor sensor channel number; 29 Symbol for signal reception from the
sensor; 30 – Nice environment icon – smiley
Weather station: control buttons for settings options:
Button press Press and hold (3 seconds)
Mode (A*) Display time, alarm 1, alarm 2.
Settings for time format, time
zone, calendar format, year,
month, day, hour, minute,
language for day of the week,
switching between pressure units
hPa/inHg, °C/°F units.
CH (B*)
Display values for sensor 1–3 and
activate cycling mode to display
values from sensors 1–3 .
Repeat search for sensor signal
and pair sensors 1/2/3.
ALERT (C*) Turn temperature alert on/o . Set temperature alert.
SNOOZE • LIGHT (D*)
1. Snooze – postpone alarm by
5 minutes.
2. Station backlight – when
operating on batteries.
3. Change backlight mode – when
operating on network adapter.
Set altitude and change weather
forecast icon.
• MEM (E*)
1. View MAX/MIN measured values
for temperature and humidity.
2. One step forward in settings
mode.
1. Erase MAX/MIN values from
memory.
2. Fast forward setting.
• HISTORY (F*)
1. View pressure history in the last
0 to 12 h.
2. One step back in settings mode.
Fast backward setting.
Weather Station Rear Description:
G Connector for plugging in power adapter; H – Battery cover; CH Openings for hanging the
station on a wall; I – Stand
5
Sensor
J LED indicator for signal transmission from sensor; K Outdoor temperature and humidity;
L – Changing channel number for the sensor (1,2,3); M – Temperature unit; N – Opening for hanging
on a wall
Technical specications
radio controlled clock
time format: 12/24 h
indoor temperature: 0 °C to +50 °C, 0.1 °C increments
temperature measurement accuracy: ±1 °C for range 0 °C to +40 °C, otherwise ±2 °C
outdoor temperature: -50 °C to +70 °C, 0.1 °C increments
temperature measurement accuracy: ±1 °C for range 0 °C to +40 °C, otherwise ±2 °C
relative humidity: 20–95 % RH, 1 % increments
humidity measurement accuracy: 5 %
temperature measurement units: °C/°F
bar. pressure measurement range: 850 hPa to 1 050 hPa
pressure unit: hPa/inHg
radio signal range: up to 30 m in an open area
number of sensors which can be connected: max. 3
wireless sensor: transmission frequency 433 MHz, 10 mW e.r.p. max.
length of the sensor‘s wire probe: 1 m
station power supply: 3× 1.5 V AAA batteries (not supplied)
adapter AC 230 V/DC 5 V (included)
sensor power supply: 2× 1.5 V AAA (not included)
station dimensions and weight: 193 × 144 × 50 mm, 364 g
sensor dimensions and weight: 60 × 100 × 21 mm, 54 g
Getting Started
1. Connect the adapter to the station/insert batteries rst into the weather station (3× 1.5 V AAA),
then into the wireless sensor (2× 1.5 V AAA). When inserting the batteries make sure the polarity
is correct to avoid damaging the weather station or sensor. Only use alkaline batteries of the
same type; do not use rechargeable batteries.
2. Place the two units next to each other. The weather station will detect the remote sensor signal
within 3 minutes. If signal from the sensor is not detected, long press the CH button on the
weather station to repeat the search.
3. If the outdoor temperature reading disappears from the display, long press the CH button on
the weather station. The weather station will reset all values and repeat the search for the
sensor signal.
4. We recommend placing the sensor on the north side of the house. The range of the sensor may
decrease substantially in areas with large number of obstacles.
5. The sensor is resistant to dripping water; however, it should not be exposed to sustained rain.
6. Do not place the sensor on metal objects as this will reduce the transmission range.
7. If the low battery icon is displayed, replace batteries in the sensor or weather station.
Switching Channel and Connecting Additional Sensors
1. Choose the desired channel (1, 2, or 3) for the sensor by repeatedly pressing the CH button. Then
long press the CH button; the icon will start ashing.
2. Remove the cover from the battery compartment and insert batteries (2× 1.5 V AAA).
3. Set the required sensor channel number (1, 2, 3) by repeatedly pressing the CH button located
in the battery compartment of the sensor. The channel number will be shown on the sensor‘s
display. Data from the sensor will be loaded within 3 minutes.
4. If the sensor signal is not detected, remove the batteries and reinsert them.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756