Znaleziono w kategoriach:
en Operator’s manual
Garden Pump
pl Instrukcja obsługi
Pompa ogrodowa
hu Használati utasítás
Kerti szivattyú
cs Návod k obsluze
Zahradní čerpadlo
sk Návod na obsluhu
Záhradné čerpadlo
el Οδηγίες χρήσης
Αντλία κήπου
sl Navodilo za uporabo
Vrtna črpalka
hr Upute za uporabu
Vrtna pumpa
sr Uputstvo za rad
Baštenska pumpa
uk Інструкція з експлуатації
Садовий насос
ro Instrucţiuni de utilizare
Pompă de grădină
tr Kullanma Kılavuzu
Bahçe pompası
bg Инструкция за експлоатация
Градинска помпа
sq Manual përdorimi
Pompë e kopshtit
et Kasutusjuhend
Aiapump
lt Eksploatavimo instrukcija
Sodo siurblys
lv Lietošanas instrukcija
Dārza sūknis
ru Инструкция по эксплуатации
Садовый насос
GP 3000/4 BASIC Art. 9010-29 GP 3700/4 BASIC Art. 9014-29
enplhucsskelslhrsr ukrotrbgsqetltlvru
Page 1 width 2 mm less: 208 mm
GAR_09010-29.960.05_2025-03-10.indd 1GAR_09010-29.960.05_2025-03-10.indd 1 10.03.25 18:1710.03.25 18:17
2
Fold-out Page width 5 mm less: 205 mm Fold-out Page width 5 mm less: 205 mm
GAR_09010-29.960.05_2025-03-10.indd 2GAR_09010-29.960.05_2025-03-10.indd 2 10.03.25 18:1710.03.25 18:17
3
Fold-out Page width 5 mm less: 205 mm Fold-out Page width 5 mm less: 205 mm
A1
3
21
A2
5
2
4
N
5
2
4
N
Art. 9010 Art. 9014
O1
6 5
7
O2
min. 1 m
5
8
S1
6
5
7
9
T1
7
0
GAR_09010-29.960.05_2025-03-10.indd 3GAR_09010-29.960.05_2025-03-10.indd 3 10.03.25 18:1710.03.25 18:17
en Garden Pump
1. SAFETY INSTRUCTIONS ..................................4
2. ASSEMBLY ............................................5
3. OPERATION ............................................5
4. MAINTENANCE .........................................5
5. STORAGE .............................................5
6. TROUBLESHOOTING ....................................5
7. TECHNICAL DATA .......................................6
8. ACCESSORIES / SPARE PARTS .............................6
9. SERVICE ..............................................6
10. DISPOSAL .............................................6
Original instructions.
This product may be used under supervision, or if
instruction regarding the safe use of the product has
been provided and the resulting dangers have been under-
stood, by children aged 8 and above, as well as by persons
with physical, sensory or mental disabilities or a lack of expe-
rience and knowledge. Children must not be allowed to play
with the product. Cleaning and user maintenance must not
be performed by children without supervision. The use of this
product by young people under the age of 16 is not recom-
mended. Never operate the product when you are tired, ill or
under the influence of alcohol, drugs or medicine.
Intended use:
The GARDENA Garden Pump is intended for pumping ground water
and rain water, tap water and water containing chlorine in private domestic
gardens and allotments.
Liquids to be pumped:
The GARDENA Garden Pump must only be used to pump water.
When the pump is used for pressure boosting, the maximum permissible
internal pressure of 6 bar (on the delivery side) must not be exceeded. The
increased delivery pressure and the pump pressure have to be added
together.
– Example: Pressure at the tap = 2.5 bar,
max. pressure of the Garden Pump Art. 9010 = 3.5 bar,
total pressure = 6.0 bar.
The product is not intended for long term use (continuous circulation
operation).
DANGER! Risk of injury!
v The pump must not be used for the delivery of salt water,
muddy water, corrosive, easily inflammable or explosive liquids
(e. g. petrol, paraffin, thinners), oil, heating oil or foodstuffs.
The pump must not be used when people are in the water.
Pollution of the liquid could occur due to leakage of lubricants.
Circuit breaker
Thermal protection switch:
In the event of an overload, the pump is switched off by the built-in thermal motor
protection. After sufficient cooling of the motor, the pump is operational again.
Additional safety warnings
Electrical safety
DANGER! Cardiac arrest!
This product makes an electromagnetic field while it operates. This
field may under some conditions interfere with active or passive medical
implants. To decrease the risk of conditions that can possibly injure or
kill, we recommend persons with medical implants to speak with their
physician and the medical implant manufacturer before you operate the
product.
Cables
If extension cables are used, these must comply with the minimum cross-
sections in the table below:
Voltage Cable length Cross section
230 – 240 V / 50 Hz Up to 20 m 1.5 mm2
230 – 240 V / 50 Hz 20 – 50 m 2.5 mm2
DANGER! Electric shock!
Risk of injury due to electric current.
v Disconnect the product from the mains before you put into storage,
maintain or troubleshoot.
The pump must be located on solid, even ground, protected from flooding. Take
care that the pump cannot fall into water. Position the pump at a safe distance
(min. 2 m) from the liquid to be pumped. As an additional safety device an
authorised safety switch can be used.
v Please ask your electrician for his advice.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Protect the mains plug and the mains power cable from heat, oil and sharp
edges.
Do not use the power cable for carrying the pump or for unplugging.
Protect the pump from rain. Don’t use the pump in wet or moist areas.
Please regularly check the connecting line.
Before using, always subject the pump (especially the power cables and the
power connections) to a visual inspection.
A pump which is damaged must not be used. In the event of damage, have the
pump checked by GARDENA Service.
When using our pumps with a generator, the warnings of the generator manufac-
turer must be observed.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also a risk that the poly-
bagcan suffocate toddlers. Keep toddlers away when you assemble the
product.
DANGER! Risk of injury due to hot water!
If the pump is operated for prolonged periods of time (> 5 min.) with the
delivery side closed, the water in the pump may heat up so that there is
arisk of scalding yourself with hot water.
v The pump should not run against the closed delivery side for more
than 5 minutes.
If the water supply on the intake side of the pump fails, the water in the
pump can heat up so that if water emerges, injuries could be caused by
the hot water.
v Disconnect the pump from the mains via the main circuit breaker,
let the water cool and secure the suction-side water supply before
putting into operation again.
When connecting the pump to the water supply system, the country-specific
sanitary regulations must be observed to prevent water not of drinking water
quality being drawn back in.
v Please consult a specialist for sanitary installations.
In order to avoid dry-running of the pump, take care that the end of the suction
hose is always submerged into the liquid.
v Before each operation, fill the pump to overflowing with approx. 2 to 3 l of the
liquid to be pumped!
Sand and other abrasive substances cause increased wear and reduce the
pump’s output.
v Use a pump pre-filter for pumping sandy liquids.
Pumping dirty water, e.g. stones, pine needles etc., can cause damage to the
pump.
v Do not pump dirty water.
IMPORTANT!
Read the operator’s manual carefully before use and keep for future
reference.
Symbols on the product:
Read operator’s manual.
General safety warnings
Electrical safety
DANGER! Electric shock!
Risk of injury due to electric current.
v The product must be supplied through a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA.
DANGER! Risk of physical injury!
Risk of injury due to electric current.
v Disconnect the product from the mains before you maintain or replace
parts. Thereby the disconnected socket must be in the visual range.
Safe operating practices
The water temperature should not exceed 35 °C.
1. SAFETY INSTRUCTIONS
4
en
Page 2 width 2 mm less: 208 mm
GAR_09010-29.960.05_2025-03-10.indd 4GAR_09010-29.960.05_2025-03-10.indd 4 10.03.25 18:1710.03.25 18:17
To pump water [ Fig. O1 / O2 ]:
CAUTION! Dry-Running of the pump!
v Fill the pump with water up to the overflow (approx. 2 to 5 l)
before each start-up.
1. Unscrew the screw fitting 6 of the filler neck 7 by hand.
2. Fill the pump via the filler neck 7 to overflowing with
approx. 2 to 5 l of water.
3. Tighten the screw fitting 6 of the filler neck 7 by hand
(do not use pliers).
4. Open any shut-off valves in the delivery line (accessories,
water stop, etc.).
5. Drain remaining water in pressure hose 5 so that air can escape
during the suction process.
6. Connect the pump to the mains.
7. Lift and hold the delivery hose 5 at least 1 m vertically above the pump,
press the On / Off switch 8 and wait until the pump has primed.
v If the pump does not deliver water after approx. 5 minutes,
switch off the pump (press On / Off switch 8)
(see 6. TROUBLESHOOTING).
The specified maximum self-priming suction height of 7 m is reached only if
the pump is filled via the filler neck 7 up to the overflow and if, while doing
so and during the self-priming, the delivery hose 5 is held up suf ficiently
high to prevent any water escaping from the pump via the delivery hose 5.
Rust formation: The pump Art. 9014 has a cast iron housing. After con-
tact with water, rust will form (this does not damage the pump and is not
covered by the warranty). Therefore rusting water may initially escape after
switching on the pump.
4. MAINTENANCE
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before you maintain
the product.
To flush the pump:
After pumping chlorinated water, the pump must be flushed.
1. Pump lukewarm water (max. 35 °C), possibly adding a mild cleaning
agent (e. g. detergent) until the pumped water runs clear.
2. Remove residuals according to the waste disposal laws applicable in
your area.
5. STORAGE
To put into storage [ Fig. S1 ]:
The pump is not frost-proof!
The product must be stored away from children.
1. Disconnect the pump from the mains.
2. If applicable, close all the shut-off devices on the intake side.
3. Open all the tapping points.
The pressure side is depressurized.
4. Open the screw fitting 6 of the filler neck 7 and the water drain
screw 9.
The Garden Pump drains.
5. Store the pump in a dry, enclosed and frost-free place.
6. TROUBLESHOOTING
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before you trouble-
shoot the product.
To loosen the impeller [ Fig. T1 ]:
An impeller blocked by dirt can be freed again.
v Turn shaft of the impeller 0 with a screwdriver.
This will loosen the stuck impeller.
2. ASSEMBLY
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before you assemble
the product.
To set up the pump:
The site must be firm and solid in order to ensure safe and sturdy operat-
ing conditions for the pump.
v Position the pump at a safe distance (min. 2 m) from the water.
The pump must be installed in a location with low air humidity and suffi-
cient ventilation in the area of the ventilation slots. It must be at a distance
of at least 5 cm from the walls. Dirt (e. g. sand or soil) must not be sucked
in through the ventilation slots.
The plastic connection pieces on the intake and delivery sides may
only be tightened by hand.
To connect the hose to the suction side [ Fig. A1 ]:
Don’t use any hose quick connection system fittings on the suction side!
v A vacuum-resistant suction hose must be used, e. g. GARDENA
Suction Unit, Art. 9090 or GARDENA Bore Hole Suction Hose
Art. 1729.
In order to reduce the suction time, it is advisable to use a suction hose
with backflow preventer avoiding automatic draining of the suction hose
when the pump has been switched off.
1. Screw the pump connection piece 2 into the connector on the suction
side 1.
2. Connect the vacuum-resistant suction hose 3 airtight to the pump
connection piece 2 of the pump.
3. For suction heights exceeding 4 m: Also fix the suction hose 3
(e. g. by fastening it to a wooden post).
This relieves the pump of the weight of the suction hose.
To connect the hose to the pressure side [ Fig. A2 ]:
The pump connection 4 is equipped with a 33.3 mm (G 1") internal thread.
E. g. a GARDENA pump connection piece Art. 1745 is required for
the GARDENA Connection System (for Art. 9010 included in scope of
delivery).
19 mm (3/4")- / 16 mm (5/8") and 13 mm (1/2") hoses can be connected
via the GARDENA Connection System.
Hose diameter Pump connection
13 mm (1/2") GARDENA Pump Connection Set Art. 1750
16 mm (5/8") GARDENA Tap Connector
GARDENA Hose Connector
Art. 18202
Art. 18216
19 mm (3/4") GARDENA Pump Connection Set Art. 1752
Optimised use of the pump capacity is achieved by connecting
19 mm (3/4") hoses with e. g.
– GARDENA Pump Connection Set Art. 1752,
or by connecting 25 mm (1") hoses with
– GARDENA Quick Thread Coupling with male thread Art. 7115 /
Quick Coupling Hose Connector Art. 7103.
1. Only for Art. 9014: Use sealing tape N on the external thread of the
pump connection piece.
2. Screw the pump connection piece 2 into the connector on the delivery
side 4 (Only with Art. 9010 in the scope of delivery).
3. Connect the pressure hose 5 to the pump connection piece 2.
If more than one hose /accessory is connected simultaneously, we
recommend using the
– GARDENA 2- or 4-Channel Water Distributor Art. 8193 / 8194,
GARDENA Twin-Tap Connector Art. 940
which can be screwed directly onto the pump connection piece 2.
3. OPERATION
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before you connect,
adjust or transport the product.
5
en
Page 2 width 2 mm less: 208 mm
GAR_09010-29.960.05_2025-03-10.indd 5GAR_09010-29.960.05_2025-03-10.indd 5 10.03.25 18:1710.03.25 18:17