Read this manual carefully before use, and retain it for future reference.
IMILAB C22
Home Security Camera
User Manual
CONTENTS
English·················································· 01-09
Русский ················································ 10-18
Polski···················································· 19-27
Français ················································ 28-36
한국어 ··················································· 37-45
ภาษาไทย ················································ 46-54
Tiếng Việt ·············································· 55-63
Product Overview
Package Contents: IMILAB C22 x 1, power cable x 1,
wall mounting accessories pack x 1, user manual x 1
MicroSD slot
(Can be
revealed by
pushing the
lens upward)
Lens
Status indicator
Loudspeaker
Micro-USB
charging port
MIC
Reset hole
Front view
Rear view
EN-01
RESET
The IMILAB C22 can be placed on flat surfaces, such as desks, dining tables,
and coffee tables. It can also be mounted on a wall.
Mounting the Camera on a Wall：
1. First use a pencil to mark the positions for the base mounting holes on the
wall, then drill two holes at the marked positions. The diameter of each hole
is approximately 6 mm, and the depth is approximately 30 mm.
2. Insert the plastic wall plugs into the drilled holes.
3. Place the side of the base with arrows facing forward, and then align the
holes. Insert the screws and then tighten them into the wall plugs with a
Phillips head screwdriver.
4. Align the grooves on the bottom of the camera with the raised part on the
base, and then turn it clockwise until it locks into place.
Installation
EN-02
Precaution for Mounting the Camera on a Wall
The wall must be able to support at least three times the total weight of
the camera.
WARNING
To prevent possible injury, the camera must be securely fixed to the ceiling
or wall according to the installation instructions.
How to Use
Installing a MicroSD Card
Make sure the camera is unplugged. Adjust the lens upward until the
microSD slot is revealed, then insert the microSD card into the slot (the side
with contact points must be facing down).
EN-03
Note: Unplug the camera when installing or removing the microSD card.
Please use a microSD card from a qualified brand (the camera supports a
microSD card with a maximum capacity of 64 GB and the FAT32 format only,
and a microSD card with a capacity of 64 GB and above may need to be
formatted to the FAT32 format before use via “Settings > Manage Storage”
on the camera’s plug-in page in the Mi Home/Xiaomi Home app). It is
recommended that the microSD card has a read/write speed of no less than
U1/Class 10.
MicroSD
RESET