Znaleziono w kategoriach:
BLUETOOTH SPEAKER
XS-E843B
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
Thank you for buying our product. Please read through these operating instructions,
so you will know how to operate your equipment properly. After you nished reading
the instructions manual, put it away in a safe place for future reference.
IMPORTANT SAFETY PRECAUTIONS
When using your Speaker, basic safety precautions should always be followed,
including the following:
• Children should be supervised to ensure that they do not play with the device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speaker-drivers as it may
damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may damage
the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected cables and the
cap is tightly closed before exposing the speaker to liquid.
• NEVER expose the speaker to water while charging, as doing so may result in
damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has malfunctioned
or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker becomes
hot, smokes, or gives off an odor during charging, terminate charging immediately.
TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG
AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN
CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.
PRODUCT OVERVIEW AND CONTROL BUTTONS
1. Microphone
2. MODE indicator light
Blue (Bluetooth) / Green (AUX IN) / White (USB)
3. POWER-ON indicator light
4. TWS connection indicator light
5. EQ indicator light
OFF (Balance Sound) / White (Bass Sound) / Yellow (Pure Sound)
6. Charging indicator lights
(25%) / (50%) / (75%) / (100%)
7. Volume control
8. button
Press to switch LED light mode (10 different LED lights modes).
Long press to turn off/on LED light.
9. button
Long press to turn on/off the speaker.
Press 1 time to Pause/Play music (Bluetooth); Mute/Unmute (AUX IN).
EN
Press 2 times to switch mode (Bluetooth / AUX IN / USB).
Press 3 times to delete speaker’s Bluetooth connection history information.
10. button
Previous song
11. button
Next song
12. button
Press 1 time to switch EQ mode.
Press 2 times to perform TWS connection.
Press 3 times to disconnect Bluetooth device.
13. USB port / AUX in / USB-CTM charging port
USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.
CHARGING
Before rst-time use, fully charge the built-in battery. The charger is not included in
the package, please charge the speaker via a standard 5 V / 2 A charger or via a
PC. The charging indicator lights will ash during charging. All four indicator lights
will glow when the speaker is fully charged.
NOTE: The charging indicator light will flash when the battery is low.
IMPORTANT: Please make a complete charge every three months to avoid shortening the
battery lifespan.
BLUETOOTH
• Long press the button to turn on the speaker. The MODE indicator light will flash
blue and hear a tone. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name “XS-E843B” then
connect it. If the pairing is successful, the MODE indicator light will be solid blue.
NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if no devices
are paired.
Disconnecting the paired mobile phone
• Press 3 times the button to disconnect the current device.
The MODE indicator light will flash blue and the speaker will be in pairing mode.
TWS (TRUE WIRELESS STEREO)
The TWS technology enables you to use two speakers pairing via Bluetooth to
create a wireless dual-channel system to deliver true stereo sound eect.
• Turn on both speakers. Make sure both speakers are without any Bluetooth
connection.
• Double press the button on one of the speakers, the second speaker will
connect automatically.
• The first speaker MODE indicator light flashes blue and the MODE indicator light
of the second one keeps solid blue.The TWS connection indicator lights of both
speakers will be solid white, which means both speakers are connected successfully.
• Pair your mobile phone with the first speaker, the MODE indicator light of both
speakers will be solid blue.
EN
Disconnect the TWS connection
Double press the button on one of the speakers to disconnect the TWS pairing.
USB
Insert USB drive into the speaker. The speaker will play the stored music
automatically.
NOTE: The speaker supports USB drives (FAT32 / exFAT) with up to 128 GB of memory.
The speaker supports MP3 / WAV audio formats.
Do not use any USB extension cable for connecting the USB drive.
The external devices can be charged via this USB port (5V / 1A).
AUX IN
The speaker automatically switches to AUX IN mode when you connect your device
with the audio cable (included). When using an external device, all functions can
only be controlled by the external device.
HANDS-FREE FUNCTION
When phone or other smartphone is connected to your speaker, follow the steps
below to take calls hands-free. When a call coming in:
• Press the button to pick up the call.
• Press the button twice to reject the call.
• During a call, press the button to hang up the call.
SPECIFICATION
BT Version 5.3
BT proles A2DP1.2 / AVRCP1.4
HFP1.6 / HSP1.2
BT connecting range 10 meters
BT Frequency 2402 - 2480 MHz
EIRP 8,06 dBm
DC input voltage/current 5V / 2A
Battery type Lithium-ion (3,7V / 7200mAh)
Battery Charging Time approx. 6 hours
Battery Playback Time 16 hours (50 % Volume)
Signal-to-noise ratio > 70 dB
Frequency response 70 Hz - 20 kHz
Rated Power 80 W (RMS)
IP code IPX5
Dimensions 386 x 152 x 220 mm
Weight 2880 ± 50 g
Package Contents: Portable Bluetooth speaker, Charging cable, Audio cable,
Shoulder strap, User manual
We reserve the right to change technical specifications.