Owners manual. Steam iron
Bedienungsanleitung. Dampfbügeleisen
Instrukcji obsługi. Żelazko parowe
Manualul proprietarului. Fier cu abur
Руководство по эксплуатации. Паровой утюг
Керівництво з експлуатації. Парова праска
EN
DE
PL
UA
RU
RO
Model/Модель: MR-310C
2
2.1
2.5
2.2
2.6
2.3
2.7
2.4
2.8
2
1
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки
1
2
3
4
8
5
76
9
10
11
3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards guarantee to you reliability
and convenience in use of this device.
Please read and comply with these original instructions prior to the initial operation of your
appliance and store them for later use of subsequent owners.
This appliance is designed for domestic use only.
Under condition of observance of user regulations and a special-purpose designation,
a parts of appliance do not contain unhealthy substances.
Technical specications
Model MR-310C
Electrical supply:
Alternating current- AC;
Rated voltage: 220-240V;
Rated frequency: 50Hz;
Max locked power: 2400 W;
Rated power: 2000 W;
Protective class I
Protection class IPX0
Operating modes: dry ironing, steam ironing, ironing with spray.
Addition functions:
«Burst or Steam shot» This function provides an extra amount of steam to remove
stubborn wrinkles.
«Vertical Steam» this function allows to steam clothes or curtains in vertical position;
«Anti-drip system» With the anti-drip system, you can perfectly iron even the most
delicate fabrics. Always iron these fabrics at low temperatures. The plate may cool down
to the point where no more steam comes out, but rather drops of boiling water that can
leave marks or stains. In these cases, the Anti-drip system automatically activates to
prevent vaporization, so that you can iron the most delicate fabrics without risk of spoiling
or staining them.
«Anti-calc system» A special resin lter inside the water reservoir softens the water
EN
4
and prevents calc build-up in the plate. The resin lter is permanent and does not need
replacing. Please note:
Use tap water only. Distilled and/demineralised water makes the «Zero-Calc” anti-calc
system ineective by altering its physicochemical characteristics.
Do not use chemical additives, scented substances or decalciers. Failure to comply with
the above-mentioned regulations leads to the loss of guarantee.
Description of the appliance
Picture1 (Illustrations on page 2)
1 - spray nozzle
2 - ller door
3 - steam/dry and self-cleaning adjustment knob
4 - spray button
5 - shot steam button
6 - power cord
7 –handle
Safety instructions
When using your appliance, basic safety precautions should always be followed,
including the following:
SPECIAL INSTRUCTIONS
Warning!
NEVER immerse the iron, cable or plug in any liquid.
NEVER touch the appliance with wet or damp hands.
ALWAYS disconnect iron from electrical outlet when lling with water or emptying and when
not in use.
Otherwise, there is a risk to get an electric shock!
DO NOT let children or untrained persons use the appliance without supervision.
DO NOT leave the hot iron touching fabrics or very inammable surfaces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the mains
when the appliance is not being used.
DO NOT use the power cord or the appliance in order to pull the plug out of the socket.
DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).
DO NOT leave the iron without supervision when it is connected to the power supply.
INSTRUCTIONS BEFORE USING
- Use iron only for its intended use.
- To protect against a risk of electric shock, do not immerse the iron in water or other
liquids.
- The iron should always be turned to ‘ O ’ before plugging or unplugging from outlet.
8 - temperature control light
9 - thermostat adjustment knob
10 - water tank
11 - sole plate with holes for steam
12 - self- cleaning button
13 - maximum water level
5
Never yank cord to disconnect from outlet; instead, grasp plug and pull to
disconnect.
- Do not allow cord to touch hot surfaces. Let iron cool completely before putting
away. Loop cord loosely around iron when storing.
- Do not operate iron with a damaged cord or if the iron has been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron take it to a qualied
serviceman for examination and repair. Incorrect reassembly can cause a risk of electric
shock when the iron is used.
- Close supervision is necessary for any appliance being used by or near children. Do not
leave iron unattended while connected or on an ironing board.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when
you turn a steam iron upside down - there may be hot water in the reservoir.
- Do not use it for commercial purpose.
Please note! Do not use chemical additive, scented substances or decalciers. Failure to
comply with the above-mentioned regulations leads to the loss of guarantee.
Operation
BEFORE STARTUP
Before the rst use remove a protective lm (at presence) from an iron sole.
Make sure that all the parts of appliance don’t have damages.
Please note! When using the iron for the rst time, you may notice a slight emission of
smoke and hear some sounds made by the expanding plastics. This is quite normal and it
stops after a short time. We also recommend passing the iron over an ordinary cloth before
using it for the rst time.
Soft the laundry to be ironed according to the international symbols on the garment label,
or if this is missing, according to the type of fabric.
GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION
Table 1
Start ironing the garments requiring a low temperature.
Signs on labels Type of fabric Thermostat positions
Synthetic ●
Low temperature
Silk - wool ●●
Medium temperature
Cotton - linen ●●●
High temperature
Fabric not to be ironed
EN