KITCHEN EXTRACTOR HOOD
OKAP KUCHENNY WENTYLACYJNY
INCASSO BASE
SLIM
USER’S MANUAL
INSTRUKCJA OBSŁUG
Dear customer!
Thank you for choosing the products of the brand "SEENERGY". We put our best efforts so you were
satisfied with your choice.
1. GENERAL INFORMATION
1.1 Prior to installing the extractor hood carefully read our recommendations, following which will
provide safe work of the appliance. Save this User’s manual, as it contains answers to the questions which
may arise later.
BEFORE STARTING THE OPERATION (SWITCHING ON) THE APPLIANCE MUST BE HELD
AT THE ROOM TEMPERATURE FOR AT LEAST TWO HOURS.
1.2. This appliance is intended for extraction of polluted air from the space above the cooking appliance,
and intended for domestic use and the household environment only and meets the requirements of State
Standard of Ukraine DSTU IЕС 60335-2-31:2006.
USE OF THE APPLIANCE IN GOALS OTHER THAN DOMESTIC IS FORBIDDEN. THE RISK
OF INJURY AND PROPERTY DAMAGE INCREASES IN CASE OF USE OF THE EXTRACTOR
HOOD WITH PURPOSES OTHER THAN INTENDED, WHAT WILL LEAD TO WARRANTY
CANCELLATION/
1.3. Use of the extractor hood decreases the content of harmful products of incomplete combustion of
natural gas, as well as odors produced during cooking in the air, and prevents pollution of walls, ceiling, and
furniture with grease and soot.
1.4. The appliance is an air purifying device of the exhaust type with a diameter fan (turbine), completed
with a grease picking aluminum filter (included) and has the option of upgrading with a carbon odor filter. It
is manufactured from sheets of carbon steel with a decorative protective coating of powder paints – 520/700
mm in width.
1.5. Depending on the installation scheme over the cooker, the extractor hood can work in two variants:
- in the mode of air extraction into the stationary ventilation shaft (chimney) of the kitchen using
corrugated aluminum or plastic air-ducts Ø150mm or Ø120mm (see item 5.3);
- in the recirculation mode (closed circular air circulation in the kitchen), when the extractor hood is not
connected to chimney, and the air is passed through aluminum grease filter (included) and smothering
carbon filter and is returned to the kitchen (see paragraph 5.3).
1.6. Attention! Do not start extractor hood installation before connecting it to electricity network and
checking its technical serviceability, and checking all of its functions.
1.7. We recommend that all installation works, connection, and repair of your extractor hood should be
carried only by qualified specialists professionally engaged in the execution of such works.
1.8. The manufacturer does not bear responsibility for any damages and failures, caused by incorrect
installation, operation, and repair of the extractor hood.
1.9. The manufacturer reserves the right to modify the product in order to improve its quality and
technical specifications.
1.10. Technical specifications for the extractor hood are indicated in this manual and on the label attached
to the inner surface of the body (access to it opens when the filter is removed).
Attention! The extractor hood should be installed on the wall at the distance of 650-750mm above
the electric cooker and at the distance 750-850 mm above the gas cooker.
EN
2. MAIN TECHNICAL SPECIFICATIONS
3. PARTS SUPPLIED
Item
Quantity
Kitchen extractor hood
1 pcs.
Plastic pipe adapter (from Ø150 to Ø120mm)
1 pcs.
User’s manual
1 pcs.
5. HOOD DESCRIPTION
5.1 Kitchen range hood “INCASSO BASE SLIM” is an air-purifying device of hood type with a diametric
ventilator (turbine) and is equipped with a grease-trapping aluminium filter. The product is manufactured in one-
motor version with a width of 520 or 700mm of sheet of carbon steel with decorative and protective coating of
powder paints.
5.2 The hood is of the “built-in” type and is built into the kitchen furniture above the stove.
5.3 Depending on the installation scheme, the hood works in two variants (Pic. 1 / Pic. 2):
• in the air outlet mode of the kitchen chimney (Pic. 1);
• in recirculation mode (closed circular air circulation in the kitchen) (Pic. 2).
Model of kitchen extractor hood
INCASSO BASE SLIM
Network voltage, V
220-230
AC frequency, Hz
50
Control type
mechanic
Number of operation modes
3
Rated power consumption, W
Of the motor
120
Lighting (LED)
2x3
General
126
Productivity while connecting to standard ventilation system m3/hour
276 (520 mm)
279 (700 mm)
Overall dimensions of the
extractor hood, mm
Width
520 / 700
Depth
270
Height
155
Connection size of ventilation duct, mm
Ø150 / Ø120
Weight, kg
4,6 (520mm)
5,0 (700mm)
Noise level, dB
63,0 (520mm)
63,0 (700mm)
Protection class
I
Operation mode
S1 (long-lasting)
Electro cable type
Armoured and grounded
Pic. 1 Pic. 2
“It should be borne in mind that when the hood is switched on indoors, the pressure is automatically
reduced, which shall be offset by the flow of fresh air. This can be achieved by opening doors, windows or
equipment of special tidal ventilation.”
5.4 The hood consists of the following components (Pic. 3):
Pic. 3
1 – body
2 – pipe adapter (from Ø150 to Ø120)
3 – power cord
4 - switch of modes of work of hood (mechanical)
5 - decorative panel
6 - aluminum grease-trapping filter (5 layer)
7 - lighting lamps
6. INSTALLATION INSTRUCTIONS FOR THE HOOD
6.1 Select the operating mode and installation place of the hood.
6.2 Remove the hood from the packing box.
6.3 Connect the hood to the electricity mains and check all its functions.
It is recalled that the height of the hood installation above electric stoves should be at least 650mm,
and above the gas stoves – at least 750mm (Pic. 1).
6.4 With regard to the established height and the condition of the hood fitting to the bottom of the lower
shelf of hinged furniture cabinet, place and cut a rectangular opening according to the dimensions of the
mounted part of the hood (Pic. 4/4.1) according to the previously made paper template.
Pic. 4
Pic. 4.1