Znaleziono w kategoriach:
Okap SEENERGY Rustica Czarny 719m3/h 65dB klasa A

Instrukcja obsługi Okap SEENERGY Rustica Czarny 719m3/h 65dB klasa A

Wróć
EN
IT
ES
FR
DE
PL
Rustica
Cooker Hood
English
Installation
Instructions
Italiano
Montaggio
Istruzioni
Español
Instalación
Instrucciones
Français
Montage
Instructions
Deutsch
Montage
Anleitung
Polski
Instalacji
Instrukcja
WARNINGS
EN/1
Safety
This equipment can be used by children aged 8 or more, people with physical, mental
and sensory disabilities or inexperienced users it they were instructed under proper
supervision or trained on the safe use of the equipment and if they are fully aware of
the related risks. Children shall not play with the equipment. The cleaning and
maintenance are at user’s expense and shall not be performed by unsupervised
children.
As soon as the equipment is delivered, remove the package immediately. Verify its
overall aspect and, should any type of anomaly be found, notify it immediately to
the sales point or the installer.
Its equipment is intended for domestic use. It shall not be employed for industrial
or professional purposes nor for any other purpose than that for which it has been
designed.
The supplier will not provide any warranty for the consequences and damages
caused by an improper installation or a misuse of the equipment.
Do not attempt to modify the characteristics of this equipment, that would
represent a hazard. Repairs shall be exclusively made by a specialized and
authorized technician. To avoid risks, the manipulation of the equipment is strictly
forbidden so is the replacement of the power cable.
If the fume hood is not supplied with a power cable and a pin or any other means
for the disconnection of the mains power supply, with a separation of the contact
between all poles that provides the total disconnection under conditions of
overvoltage category III, shall be incorporated to disconnecting means to the fixed
system, according to the installation rules (two-pole switch directly connected to
power supply terminals which shall have a separation of the contact between poles
so as to interrupt the supply of electricity in case of overvoltage category III).
Once the equipment has been installed, the disconnection of the equipment from
the power supply shall be allowed. Disconnection can be done by keeping the jack
accessible or adding a switch to the electric system in accordance with the
installation rules.
If the power cord is damaged, it shall be replaced either by the producer, its
customer service or qualified personnel in order to avoid risks.
It is of vital importance to place particular attention as to where the wall or ceiling
will be perforated so as to verify the presence of hidden electrical cables, pipes or
iron beams, etc. This may cause serious breakdowns, electrical derivations or the
transmission of noises and vibrations.
WARNINGS
EN/2
IMPORTANT: During the installation phase, before electrically connecting the
equipment, always disconnect the power panel that will supply it (differential or
thermal-magnetic of the general house switchboard).
WARNINGS: Always disconnect the exhaust hood from the electrical outlet before
proceeding to cleaning and maintenance operations by plugging off the electrical
outlet, differential or thermal-magnetic of the general home switchboard. To clean
the exhaust hood, never use steam or high-pressure devices (rules regarding electric
safety).
It is forbidden to cook directly on the flame or operate the gas stoves with no
container to cook on the same flame (aspirated flames may damage the equipment
and the warranty will be cancelled accordingly). The use of the equipment on a fuel
stove is not authorized (wood, coal,…).
Frying under the equipment shall be constantly monitored since oils and fats being
subjected to high temperatures may ignite. Do not flame under the exhaust hood.
Precaution: burns of accessible parts are likely to occur as they can get hot when
using cooking appliances.
Follow the cleaning frequency and filter substitution. The accrual of fat deposits
may provoke fires. Never use the exhaust hood without the anti-fat filter.
The equipment shall abide by the existing rules on the ventilation of closed spaces.
Technically, the air expelled shall not pass through the duct used for the discharge
of smokes from appliances using gas or any other fuel (central heating systems,
etc...).
Ventilate the environment appropriately in case of a simultaneous operation of the
exhaust hood and any other equipment supplied by an energy source other than
electricity so that the exhaust hood will not draw gas compounds.
Attention! During the simultaneous operation of a suction-filtration exhaust hood
and a heating system independent of air (gas heaters, oil, coal, chimney, etc...),
great attention has to be placed so as to avoid that the exhaust hood does not
absorb part of the air intended for the combustion process since dangerous
amounts of carbon monoxide may surge within the premises, that would represent
a life-threatening danger. When installing an exhaust hood joined or connected to
a fuel element such as a heater, chimney or local heating system, it is mandatory
to contact the producer or installer of such elements to obtain an optimal and risk-
free operation.
It is necessary to maintain a depressurized environment of maximum 0.04 mbar.
Such conditions allow an excellent working of the exhaust hood. In order to achieve
such environment a permanent air intake is necessary in order to avoid air
stagnation (it is advised to use a ventilation grid for this purpose). Windows or doors
shall not be used.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756