Model: TEG1105P-4-63W/TEG1109P-8-102W
Package contents
Quick installation guide * 1
Switch * 1
Power adapter * 1
1. Product overview
Quick Installation Guide
5-Port Gigabit Desktop Switch With 4-Port PoE
9-Port Gigabit Desktop Switch With 8-Port PoE
Fig 1. Front panel of TEG1105P-4-63W
Working mode slide switch
2. Connecting the devices
LED Indicator
Status
Description
PWR or
Power
Solid on
The switch is connected to a power supply properly.
Off
The switch is disconnected from a power supply or not
properly connected to a power supply.
Link/Act
(In the upper-left
corner of each port)
Solid on
The port is connected properly.
Blinking
Data is being transmitted over the port.
Off
The port is disconnected or improperly connected.
PoE
(In the upper-right
corner of ports 1 – 4 of
TEG1105P-4-63W)
Solid on
The port is connected to a PoE-powered device and
powering it on properly.
Off
The port is disconnected from a PoE-powered device or
does not power it on properly.
Working mode introduction
The PoE switch has two modes: Default/VLAN Off, and VLAN/VLAN On. Use
the slide switch to set the PoE switch to your required mode according to the
following descriptions.
Default/VLAN Off: Default mode of the PoE switch. In this mode, all ports can
communicate with each other.
VLAN/VLAN On: In this mode, ports 1 to 4 of TEG1105P-4-63W can
communicate with port 5 but cannot communicate with each other. Ports 1 to
8 of
TEG1109P-8-102W can communicate with port 9 but cannot communicate
with each other. You can enable this mode to reduce broadcast storm and
isolate DHCP broadcast.
Model
TEG1105P-4-63W
TEG1109P-8-102W
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
Port
10/100/1000 Mbps
5
9
Lightning protection
6 kV
Performanc
e
Switching capacity
10 Gbps
18 Gbps
MAC address table
2 K
16 K
MAC address learning
Auto learning & auto aging
Store-and-forward
Supported
PoE power
supply
PoE standard
IEEE 802.3af, IEEE 802.3at
PoE port
1 - 4
1 - 8
Maximum power
output of a single port
30 W
Maximum power
output of the switch
58 W
92 W
PoE power cable core
8 cores: voltage of cores 1, 2, 4, 5 is +, and cores 3, 6, 7, 8
Environmen
t
Operating
environment
Temperature: (0 - 40) °C
Humidity: (10% - 90%) RH non-condensing
Storage environment
Temperature: (-40 - 70) °C
Humidity: (5% - 90%) RH, non-condensing
Power supply
Input: 100-240 V, AC, 50/60
Hz
Input: 100-240 V, AC, 50/60
Hz
Dimension
100 mm * 100 mm * 26 mm
177.5 mm * 108 mm * 26 mm
Transmission rate
Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full
duplex)
Transmission media
Ethernet: CAT3 UTP/STP cable or better
Fast Ethernet: CAT5 UTP/STP cable or better
Gigabit Ethernet: CAT5e or CAT6 UTP/STP cable
(recommended)
Specifications
Copyright
Copyright © 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other
brand and product names mentioned herein are trademarks or registered trademarks of their
respective holders. Specifications are subject to change without notice.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China.
518052
Canada hotline: 1-888-998-8966
Toll Free: Mon to Fri, 9am to 6pm PST
Hong Kong hotline: 00852-81931998
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
The mains plug is used as disconnect device; the disconnect device shall remain readily operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to
be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when
he buys new electrical or electronic equipment.
Producto
NOMBRE DEL PRODUCTO:
Conmutador de escritorio de 5 puertos Gigabit con 4 puertos PoE
Alimentador de Energía:
Alimentación: 100 - 240 V ca 50/60 Hz, 1.2 A
Producto
NOMBRE DEL PRODUCTO:
Conmutador de escritorio de 9 puertos Gigabit con 8 puertos PoE
Alimentador de Energía:
Alimentación: 100 - 240 V ca 50/60 Hz, 1.6 A
PAIS DE ORIGEN: CHINA
LA OPERACIóN DE ESTE DISPOSITIVO ESTA SUJETA A LAS SIGUIENTES CONDICIONES:
a) Es posible que este equipo o dispositivo no cause interferencia perjudicial.
b) Este equipo o dispositivo debe aceptar cualquier tipo de interferencia, incluyendo la que
pueda causar su operación no deseada.
Power jack
Grounding terminal
Link/Act indicator
PoE indicator Power indicator
PoE ports 1-4 Uplink port
Fig 2. Back panel of TEG1105P-4-63W
TEG1109P-8-102W
VLAN
Off On
9-Port Gigabit Desktop Switch With 8-Port PoE
PWR
9 (Uplink)
Fig 3. Front panel of TEG1109P-8-102W
PWR indicator
Fig 4. Back panel of TEG1109P-8-102W
Link/Act indicator
Working mode slide switch
Uplink port
PoE ports 1-8
Power jack
Grounding terminal
(Example: TEG1109P-8-102W)
All ports of your switch support the auto MDI/MDIX function, indicating
that either straight cable or crossover cable is acceptable to connect your
switch to Ethernet devices.
Tip
PoE ports of your switch are assigned with power supply priorities to
protect the switch from overload, and the priorities decreases as the port
number increases. When the total power requirement of the PoE-powered
devices exceeds 58 W for TEG1105P-4-63W or 92 W for TEG1109P-8-102W,
the switch starts cutting the power supply from the port with the lowest
priority, until the total requirement does not exceed 58 W / 92 W.
To protect your switch from lightning damage, connect the grounding
terminal to a grounding cable.
Router
LAN port WAN port
LAN1 LAN2 LAN3 LAN4 WAN
Uplink port
Power Adapter
PoE switch Internet
Computer
PoE-powered devices
IP camera IP phoneAP
Caution: (For TEG1105P-4-63W)
Adapter Model: BN031-A65051
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100 - 240 V AC, 50/60 Hz, 1.2 A
Output: 51 V 1.25 A
: DC Voltage
Caution: (For TEG1109P-8-102W)
Adapter Model: BN038-A10151
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100 - 240 V AC, 50/60 Hz, 1.6 A
Output: 51 V 2 A
: DC Voltage
LED-Anzeige
Status
Beschreibung
PWR oder Power
Aus
Der Switch ist von der Stromversorgung getrennt oder nicht
Link/Act
(In der linken oberen
Ecke eines jeden Ports)
PoE
(In der rechten oberen
Ecke der Ports 1 – 4 von
TEG1105P-4-63W)
Leuchtet
Dieser Port ist mit einem PoE fähiges Gerät verbunden und
Aus
Dieser Port ist mit keinem PoE fähiges Gerät verbunden oder
startet nicht korrekt.
Einführung in die Betriebsmodi
Der PoE-Switch hat zwei Modi: Default/VLAN Off und VLAN/VLAN On. Schalten Sie den
PoE-Switch über den Schieberegler in den gewünschten Modus. Wählen Sie den Modus
gemäß der nachfolgenden Beschreibungen aus.
Default/VLAN Off: Ist der Standardmodus des PoE-Switches. In diesem Modus
funktioniert der PoE-Switch als unverwalteter PoE-Switch und alle Ports können
untereinander kommunizieren.
VLAN/VLAN On: In diesem Modus können die Ports 1 bis 4 des TEG1105P-4-63W mit
dem Port 5 kommunizieren aber nicht untereinander. Die Ports 1 bis 8 des TEG1109P-8-
102W können dann mit Port 9 kommunizieren aber nicht untereinander. Verwenden Sie
diesen Modus, um Broadcast-Storm zu reduzieren oder den DHCP-Broadcast zu
Deutsch
Indicatore LED
Stato
Descrizione
PWR o Power
Spento
L'interruttore è scollegato dall'alimentazione o non
Link/Act
(Nell'angolo in alto a
sinistra di ogni porta)
Accensione
I dati vengono trasmessi attraverso la porta.
Spento
La porta è scollegata o collegata in modo non corretto.
PoE
(Nell'angolo in alto a
destra delle porte 1 – 4
di TEG1105P-4-63W)
Accensione
La porta è collegata a un dispositivo PoE e viene accesa
Spento
La porta è scollegata da un dispositivo PoE o non viene
Introduzione modalità di lavoro
Lo switch PoE presenta due modalità: Default/VLAN Off, e VLAN/VLAN On. Utilizzare
l'interruttore scorrevole per regolare l'interruttore PoE nella modalità richiesta secondo
le seguenti indicazioni.
Default/VLAN Off: Modalità predefinita dell'interruttore PoE. In questa modalità,
l'interruttore PoE svolge la funzione di un interruttore PoE non gestito, e tutte le porte
possono comunicare le une con le altre.
VLAN/VLAN On: In questa modalità, le porte 1 – 4 del TEG1105P-4-63W possono
comunicare con la porta 5 ma non tra di loro. Le porte 1 – 8 del TEG1109P-8-102W
possono comunicare con la porta 9 ma non tra di loro. Si può utilizzare questa modalità
per ridurre il broadcast storm e isolare la trasmissione DHCP.
Italiano
Indicador LED
Estado
Descrição
PWR ou Power
Off (Desligado)
O interruptor é desligado da fonte de alimentação ou não
Link/Act
(No canto superior
esquedo de cada porta)
A piscar
Os dados estão a ser transmitidos pela porta.
Off (Desligado)
A porta está desconectada ou indevidamente conectada.
PoE
(No canto superior
direito das portas 1 – 4
do TEG1105P-4-63W)
Sólido ativado
A porta está conectada a um dispositivo PoE e a carregar
Off (Desligado)
A porta está desconectada de um dispositivo PoE ou não
Introdução ao Modo de Trabalho
O interruptor PoE tem dois modos: Default/VLAN Off e VLAN/VLAN On. Use o controlo
deslizante para definir o interruptor PoE para o modo necessário de acordo com as
seguintes descrições.
Default/VLAN Off: Modo padrão do interruptor PoE. Neste modo, o interruptor PoE
funciona como um interruptor PoE não gerido e todas as portas podem comunicar
entre si.
VLAN/VLAN On: Neste modo, as portas 1 a 4 do TEG1105P-4-63W podem comunicar
com a porta 5 mas não podem comunicar entre si. As portas 1 a 8 do TEG1109P-8-
102W podem comunicar com a porta 9 mas não podem comunicar entre si. Pode
utilizar este modo para reduzir os distúrbios de transmissão e isolar a transmissão
Português
Indicador LED
Estado
Descripción
PWR o Power
Encendido
El dispositivo está conectado a la fuente de alimentación
Apagado
El switch está desconectado de una fuente de alimentación o no
Link/Act
(en la esquina superior
izquierda de cada
PoE
(en la esquina superior
derecha de los puertos
1 – 4 del
Encendido
El puerto está conectado a un dispositivo PoE y transmite la
alimentación correctamente.
Apagado
El puerto no está conectado a un dispositivo PoE o no transmite
la alimentación correctamente.
Introducción al Modo Trabajo
El switch PoE dispone de dos modos: Default/VLAN Off y VLAN/VLAN On. Use el
interruptor para establecer el switch PoE en el modo deseado de acuerdo con las
descripciones siguientes.
Default/VLAN Off: modo predeterminado del switch PoE. En este modo, el switch PoE
funciona como un switch PoE no administrado y todos los puertos pueden comunicarse
entre sí.
VLAN/VLAN On: En este modo, los puertos 1 a 4 del TEG1105P-4-63W pueden
comunicarse con el puerto 5 pero no pueden comunicarse entre sí. Los puertos 1 a 8
del TEG1109P-8-102W pueden comunicarse con el puerto 9 pero no pueden
comunicarse entre sí. Puede usar este modo para reducir la tormenta de difusión y
Español
Indicateur LED
Statut
Description
PWR ou Power
Eteint
Le commutateur est déconnecté de la source d’alimentation
Link/Act
(En haut à gauche
de chaque port)
PoE
(En haut à droite des
ports 1 à 4 de
TEG1105P-4-63W)
Solide en
Le port est connecté à un périphérique PoE et l'alimente
Eteint
Le port est déconnecté d'un périphérique PoE ou ne
Introduction du mode de fonctionnement
Le commutateur PoE a deux modes: Default/VLAN Off, et VLAN/VLAN On. Utilisez la
glissière pour régler le commutateur PoE au mode requis selon les descriptions
suivantes.
Default/VLAN Off: Mode par défaut du commutateur PoE. Paramétré sur ce mode, le
commutateur PoE fonctionne comme un commutateur PoE non-géré et tous les ports
peuvent communiquer entre eux.
VLAN/VLAN On: Dans ce mode, les ports 1 à 4 de TEG1105P-4-63W peuvent
communiquer avec le port 5 mais pas entre eux. Les ports 1 à 8 de TEG1109P-8-102W
peuvent communiquer avec le port 9 mais pas entre eux. Vous pouvez activer ce mode
Français
LED индикатор
Статус
Описание
PWR или Power
Без прекъсване
Превключвателят е свързан правилно с електрозахранването.
Изключен (Off)
Прекъсвачът е изключен от захранването или не е свързан
правилно с него.
Link/Act
(в горния ляв ъгъл
на всеки порт)
Без прекъсване
Портът е свързан правилно.
Мигащ
Данните се предават през порта.
Изключен (Off)
Портът е прекъснат или неправилно свързан.
PoE
(в горния десен
ъгъл на портове
1 – 4 от
TEG1105P-4-63W)
Без прекъсване
Този порт е свързан към устройство със захранване по
Ethernet (PoE) и се захранва правилно.
Изключен (Off)
Този порт не е свързан към устройство със захранване по
Ethernet (PoE) и не се захранва правилно.
Въведение в работния режим
Превключвателят за захранване по Ethernet (PoE) има два режима:
Default/VLAN Off (По подразбиране/VLAN изключено) и VLAN/VLAN On и
(VLAN/VLAN включено). Използвайте страничния превключвател, за да
настроите превключвателя за захранване по Ethernet (PoE) в изисквания
режим според следните описания.
Default/VLAN Off: Режим по подразбиране на превключвателя за захранван
е по Ethernet (PoE). В този режим превключвателят за захранване по
Ethernet (PoE) функционира като нерегулиран превключвател за захранване
по Ethernet (PoE) и всички портове могат да комуникират един с друг.
VLAN/VLAN On: В този режим портове от 1 до 4 от TEG1105P-4-63W могат
да комуникират с порт 5, но не могат да комуникират един с друг. Портове
от 1 до 8 от TEG1109P-8-102W могат да комуникират с порт 9, но не могат да
комуникират един с друг. Можете да използвате този режим, за да намалите
бродкаст бурята и да изолирате излъчването на DHCP.
Български
LED visszajelző
Státusz
Leírás
PWR vagy Power
Folyamatosan
A készülék helyesen van az energiaellátáshoz csatlakoztatva.
kikapcsolva
A váltó nincs, vagy nem megfelelően van csatlakoztatva a
tápegységhez.
Link/Act
(Az egyes portok bal
felső sarkánál)
Folyamatosan
Az egyező port helyesen van csatlakoztatva.
Villog
Adatátvitel van folyamatban a porton keresztül.
PoE
(A TEG1105P-4-63W
1–4-es portjainak
jobb felső sarkánál)
Folyamatosan
A port PoE eszközhöz van csatlakoztatva, és megfelelő
kikapcsolva
A port nincs csatlakoztatva PoE eszközhöz, vagy nem
Bevezetés: üzemmódok
A PoE kapcsoló két üzemmóddal rendelkezik: Default/VLAN Off
(Alapértelmezett/VLAN kikapcsolva) és VLAN/VLAN On (VLAN/VLAN bekapcsolva). A
csúszókapcsolóval állítsa a PoE kapcsolót a kívánt üzemmódba az alábbi leírások
szerint.
Default/VLAN Off: A PoE kapcsoló alapértelmezett üzemmódja. Ebben az
üzemmódban felügyelet nélküli PoE kapcsolóként működik a PoE kapcsoló, és az
összes port képes kommunikálni egymással.
VLAN/VLAN On: Ebben az üzemmódban a TEG1105P-4-63W 1–4-es portja képes
kommunikálni az 5-ös porttal, de nem képesek kommunikálni egymással. A
TEG1109P-8-102W 1–8-as portja képes kommunikálni a 9-es porttal, de nem képesek
Magyar
Светодиодный
индикатор
Статус
Описание
PWR или Power
Горит постоянно
Коммутатор подключен к источнику питания.
Выключено
Коммутатор отключен от источника питания или
подключен к нему неправильно.
Link/Act
(в левом верхнем
углу каждого
порта)
Горит постоянно
Порт подключен правильно.
Мигает
Через порт осуществляется передача данных.
Выключено
Подключение к порту не выполнено или выполнено
неправильно.
PoE
(в левом правом
углу портов 1 – 4
устройства
TEG1105P-4-63W)
Горит постоянно
Порт подключен к устройству с питанием по технологии
PoE и питание подается правильно.
Выключено
Порт отключен от устройства с питанием по технологии
PoE или питание подается неправильно.
Обзор режимов работы
У коммутатора с PoE есть два режима: Default/VLAN Off и VLAN/VLAN On.
Используйте переключатель для перевода коммутатора с PoE в нужный
режим, выбранный на основе описания.
Default/VLAN Off: Режим по умолчанию коммутатора с PoE. В этом режиме
коммутатор с PoE работает в качестве неуправляемого коммутатора с PoE, и
все порты могут подключаться друг к другу.
VLAN/VLAN On: В этом режиме порты 1 – 4 устройства TEG1105P-4-63W
могут подключаться к порту 5, но не могут подключаться друг к другу.
Порты 1 – 8 устройства TEG1109P-8-102W могут подключаться к порту 9, но
не могут подключаться друг к другу. В этот режим можно перейти, чтобы
уменьшить broadcast шторм и изолировать DHCP broadcast.
Русский
Indicator LED
Stare
Descriere
PWR sau Power
Rămâne aprins
Dispozitivul este conectat corect la sursa de alimentare.
Oprit
Switch-ul este deconectat de la sursa de alimentare sau nu
Link/Act
(în colţul din stânga-
sus al fiecărui port)
Rămâne aprins
Portul corespunzător este conectat corect.
Lumineaza
intermitent
Datele sunt transmise prin port.
Oprit
Portul este deconectat sau nu este conectat corect.
PoE
(în colţul din
dreapta-sus al
porturilor 1 – 4 ale
Rămâne aprins
Portul este conectat la un dispozitiv PoE şi se alimentează
Oprit
Portul este deconectat de la un dispozitiv PoE şi nu se
Prezentarea modurilor de lucru
Switch-ul PoE are două moduri: Default/VLAN Off şi VLAN/VLAN On. Setati switch-ul
PoE în modul dorit din comutator, conform următoarelor descrieri.
Default/VLAN Off: Modul implicit al switch-ului PoE. În acest mod, switch-ul PoE
funcţionează ca un switch PoE fără management şi toate porturile acestuia pot
comunica între ele.
VLAN/VLAN On: În acest mod, porturile 1 – 4 ale TEG1105P-4-63W pot comunica cu
portul 5 dar nu pot comunica între ele. Porturile 1 – 8 ale TEG1109P-8-102W pot
comunica cu portul 9 dar nu pot comunica între ele. Puteți utiliza acest mod pentru a
Română
Kontrolka LED
Stan
Opis
PWR lub Power
Ciągłe światło
Urządzenie jest prawidłowo podłączone do źródła zasilania.
Wyłączone
Urządzenie jest odłączone od źródła zasilania lub nie zostało
do niego poprawnie podłączone.
Link/Act
(w lewym górnym
rogu każdego portu)
Ciągłe światło
Gniazdo jest połączone poprawnie.
Miganie
Port obsługuje przesyłanie danych.
Wyłączone
Port jest odłączony lub niepoprawnie podłączony.
PoE
(w prawym górnym
rogu portów 1 – 4
urządzenia
Ciągłe światło
Port jest podłączony do urządzenia PoE i zasila urządzenie
prawidłowo.
Wyłączone
Port jest odłączony od urządzenia PoE lub nie włącza go
prawidłowo.
Wprowadzenie do trybów pracy
Switch PoE może działać w dwóch trybach: Default/VLAN Off. i VLAN/VLAN On. Za
pomocą przełącznika włącz w switchu PoE wymagany tryb pracy. Opisy trybów znajdują
się poniżej.
Default/VLAN Off: Tryb domyślny switcha PoE. W tym trybie urządzenie działa jako
niezarządzany switch PoE, a wszystkie jego porty komunikują się ze sobą.
VLAN/VLAN On: W tym trybie porty od 1 do 4 urządzenia TEG1105P-4-63W mogą
komunikować się z portem 5, ale nie ze sobą nawzajem. Porty od 1 do 8 urządzenia
TEG1109P-8-102W mogą komunikować się z portem 9, ale nie ze sobą nawzajem.
Polski
TEG1109P-8-102W
VLAN
Off On
9-Port Gigabit Desktop Switch With 8-Port PoE
PWR
9 (Uplink)
Grounding terminal