Znaleziono w kategoriach:
1
EN
CZ
SK
PL
HU
SL
DE
USER MANUAL
TESLA SMART INDOOR
IRRIGATION SYSTEM
RO
UA
2
IN THE BOX
DESCRIPTION
Tesla Smart Indoor Irrigation System
10m hose (1 pcs.)
T connector (10 pcs.)
End plug (3 pcs.)
Dripper (10 pcs.)
USB-C Cable
2 - Red LED
3 - Green LED
4 - Blue LED
5 - USB-C1 - Control button
6 - Inlet port 7 - Outlet port
3
INSTALLATION
Setup the main unit
1. Plug in the USB cable
2. When power is on, the LED indicators light up and then turn
off in a few seconds.
3. Reset the device by pressing and holding the control button
(2) for 5 seconds. Blue LED will start blinking and the unit is now
in pairing mode.
Connect the hoses
1. Cut the tubing according to the position of the pump, water
reservoir and number of pots.
2. Soaking the head of tubing into hot water for 10s or applying
a little vegetable oil on the end of the tubing will ease the
installation.
3. Connect the tubing to the water inlet and outlet (6, 7)
4. Use T fittings to split the watering lines. To avoid leaking ,
make sure the fittings are pressed as deep into the tubing as they
can go.
5. Press the drippers into the tubing. Press the drippers deep
enough into the soil to make sure water goes to the roots.
6. If needed, insert the end plug into the end of tubing.
7. If needed, use the hook at the back of the main unit to attach it
to the water reservoir.
Correct position of the kit
1. Place the main unit higher than the reservoir water level, and
make sure the first dripper is higher than the top of the water
level in the water reservoir to effectively avoid the siphoning
phenomenon. (The siphoning effect will cause the water leaking
and over-watering problem).
2. We recommend that the height difference between pots and
the water pump does not exceed 3m.
Testing before use
Congratulations, you have completed the connection and insta-
llation of the drip irrigation kit. Please test the watering lines for
leaks to avoid water damage before letting the kit run remotely.
You can turn the pump on by pressing the control button (2).
4
CONNECTION
Download
Tesla Smart is available for both iOS and
Android OS. Search the name ‚Tesla Smart‘ in App Store or
Android Market, or scan the QR-Code to download the App.
Set up router - The device supports only 2.4G
Wi-Fi and does not support 5G WiFi. Please set the
parameters of the router before connecting to the
Wi-Fi network, and record the SSID and password
of your Wi-Fi.
Adding a device
1. Open the Tesla Smart App and choose to create a
new account or log in directly.
2. Click the „+“ sign in the upper right corner to add
the device.
3. Select the product.
4. Enter the WiFi password and confirm.
5. Follow the instructions. Note: please ensure that
the mobile phone and the device are in the same
WiFi environment.
6. Wait for the device to complete the connection.
7. „Add device success“ appears to indicate that the
device connection was successful.
In the device interface, you can open settings by
clicking on the three dots in the upper right corner,
here you can set common functions.
Due to the continuous development of the App,
the layout and available features may be subject to
change.
5
FUNCTIONS
1. Manual watering
Your pump has the ability to allow you to manually water without
disturbing the programmed schedule. Manual mode is used
to test the device after assembly or to run an extra watering
cycle outside the program. Press the control button (2) once to
active manual watering. The green indicator will light up. Default
runtime is 30 seconds.
You can set the length of the manual watering cycle in app. De-
fault runtime is 30 seconds. The maximum runtime up to 4 min
59 s (5 minutes). Go to device home screen > tap
“Work time“and select desired cycle length. The maximum
manual mode runtime is 4 min 59 s (5 minutes).
You can stop the flow of water at any time, whether it is during
manual watering, or during a programmed time. Press the control
button (2) or tap the watering icon in app to stop watering.
2. Normal Timing
Normal timing plan lets you water for a particular period in a
day. With this mode, you can set several different watering plans
every day. Each watering plan can be set with different start time,
duration and watering day (frequency).
3. Cycle Timing
Cycle timing lets you set watering for a certain period during
given time in a day. For example you can set the kit to water for
one minute every 5 minutes from 14:00 to 15:00. This mode can
be used for water demanding plants od during very hot days. This
mode helps to soak the soil.
Please be aware your schedules do not overlap.