Quick Installation Guide
5G CPE Router
© 2024 TP-Link 7106510911 REV1.0.0
For technical support, the user guide and more information, please visit https://www.tp-link.com/support/.
CONTENTS
01 / English
05 / Български
09 / Čeština
13 / Қазақша
17 / Lietuvių
21 / Magyar
25 / Polski
29 / Русский язык
33 / Română
37 / Slovenčina
41 / Srpski jezik/Српски језик
45 / Українська мова
49 / Eesti
53 / Hrvatski
57 / Latviešu
61 / Slovenščina
1
English
Connect the Hardware
1 Insert the SIM card into the slot until
you hear a click.
2 Connect the power adapter and turn
on the router.
3 Make sure the Internet LED is on,
indicating the router is connected to
the internet successfully. If it is not,
Please refer to FAQ > Q2 in this guide.
Connect your device to the router
(wired or wireless).
The default SSID and password are
printed on the product label at the
bottom of the router.
Enjoy the Internet!
Note: Images are for demonstration only.
2
English
Customize the 5G/4G+ Router
1 Make sure your computer is connected to the router (via wired or wireless).
2 Enter http://tplinkmodem.net or http://192.168.1.1 in the address bar of a web browser.
Based on the actual web management login page: use the default admin for both username
and password or create a new password to log in.
3 Follow the step-by-step instructions on the Quick Setup page to complete the initial
configuration.
Note: The router can also be used (or configured) in wireless router mode for Cable connections. For more information, please
refer to the User Guide at www.tp-link.com.
FAQ(Frequently Asked Questions)
Q1. What should I do if I cannot access the web management page?
• Verify that the computer is set to obtain an IP address automatically from the router.
• Verify that http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser.
• Use another web browser and try again.
• Reboot your router and try again.
• Disable and then enable the active network adapter and try again.
Q2. What can I do if I cannot access the internet?
3
English
• Verify that your SIM card is a 5G/4G or WCDMA card.
• Verify that your SIM card is in your ISP’s service area.
• Verify that your SIM card has sufficient credit.
• Check the LAN connection:
Enter http://tplinkmodem.net or http://192.168.1.1 in the address bar of a web browser. If the login
page does not appear, refer to FAQ > Q1 and then try again.
• Check your ISP parameters:
1 Open a web browser and log in to the web management page.
2 Verify the parameters provided by your ISP are correctly entered. If the parameters are incorrect,
create a new profile with the correct parameters.
• Check the PIN settings:
1 Open a web browser and log in to the web management page.
2 Verify if PIN is required. If it is, enter the correct PIN provided by your ISP.
• Check the Data Limit:
1 Open a web browser and log in to the web management page.
2 Verify if the total used data exceeds the total allowance. If it does, correct the total allowance and
set the total used data to 0, or disable the data limit.
• Check the Mobile Data:
1 Open a web browser and log in to the web management page.
2 Enable the mobile data to access the internet.