Znaleziono w kategoriach:
Gramofon AKAI ATT-11BTN Bluetooth USB Brązowy

Instrukcja obsługi Gramofon AKAI ATT-11BTN Bluetooth USB Brązowy

Wróć
Turntable with Built-in Speakers
ATT-11BTN
INSTRUCTION MANUAL
EN - ENGLISH
SAFETY INSTRUCTIONS
Read these safety instructions before using your device and store them for possible future reference.
The device is not intended for use by persons (including children) with reduced physical, sensory
or mental capacity. Persons who have not read the manual, unless they have received explanations
by a person responsible for their safety and supervision should not use this unit.
Children should be monitored to ensure that they do not play with the device.
The device should always be readily accessible.
The device should not be exposed to dripping or splashing water.
No objects filled with liquids such as vases shall be placed on the device.
high audio volume and no more than one hour per day at medium audio volume. Always leave a
minimum distance of 10 cm around the unit to ensure sufficient ventilation.
Open flame sources, such as candles, should not be placed on top of the device.
The device is intended for use only in a temperate climate.
At full volume, prolonged listening to the portable audio device may damage the users hearing
and cause hearing troubles (temporary or permanent deafness, hearing drone, tinnitus,
hyperacusis). So we recommend not to listen to the portable audio device at high audio volume
and no more than one hour per day at medium audio volume.
SWITCH OFF IN RESTRICTED AREAS
Switch the mobile device off where the use of mobile devices is not allowed or where there is a risk of
causing interference or danger, for example on board an aircraft, near medical equipment, fuel,
chemicals or blasting sites.
INTERFERENCE
All wireless devices are susceptible to interference which may affect their performance.
AUTHORISED PERSONNEL
Only qualified people are authorized to install or repair this product
ACCESSORIES
Only use chargers and other accessories which are compatible with this equipment. Do not connect
incompatible products.
KEEP THE EQUIPMENT DRY
This equipment is not water proof. Keep it dry.
CHILDREN
Keep your device in a safe place, out of the reach of young children. The device contains small parts
that may present a choking hazard.
FUNCTIONS:
3-speed (33 1/3, 45 and 78 RPM)
Built-in stereo speakers for great sound
High quality ceramic cartridge produces detailed
sound
Belt driven turntable mechanism
DC power adapter, 45 RPM adapter included
AUTO-STOP tone arm
RCA audio out
Play 7", 10" & 12" Records
Bluetooth function
Bluetooth V5.0
SD card reader & USB flash driver
Record vinyl to SD card or USB Drive
2
DESCRIPTION
1. 45-rpm Adaptor
2. Tone arm lift
3. Speed selection Three speed for choice:
33 1/3, 45, 78 RPM
4. Auto stop control
5. tone-arm rest/lock
6. Tone arm
7. Cartridge
8. Turntable Platter
9. Speaker
10. BT Launch Indicator light (Power light)
11. Power Switch/Volume control
12. R channel
13. L channel
14. DC power jack
15. Previous music
16. Pause/play button/DEL
17. Next music
18. Mode: REC/Bluetooth /BT Launch/USB/SD
selection button
19. USB connector
20. SD card connector
3
Fitting the dust cover
Refer to the diagram below to
attached the plastic dust cover.
Take care when fitting, and do not
press down too hard. Remove the
dust cover in the same manner,
but pull the cover upwards.
INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit
is ready to be connected to a mains voltage of 5V DC adaptor.
CONNECTING TO AN EXTERNAL SOUND SYSTEM
Should you wish to connect the turntable to an external amplifier follow the below steps.
4
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear of the
turntable.
Note: Take care to match the RED/WHITE plugs to the corresponding RED/WHITE sockets.
Connect the other end of the cable to an AUDIO INPUT on the amplifier (check your amplifier user
manual if you are not sure).
The volume control on the turntable will have no effect on the volume level when connected this
way. All volume controls should be operated from the amplifier.
Note: Turn the volume on the turntable all the way down, so it does not interfere with the external
sound system.
Playing a record
Before use, ensure the security wire (tone-arm rest/lock) and the cartridge protector
(stylus/cartridge) have been removed. And the tone-arm lock is released.
Place a record on the turntable platter.
Select the speed required using the speed selector switch.
Raise the tone-arm using the tone-arm lift lever. As you move the tone-arm towards the record
the turntable begins spinning. Lower the needle gently onto the outer edge of the record using
the tone-arm lift lever.
Rotate the ON/OFF/Volume control knob to increase or decrease the volume level.
When a record comes to the end, the turntable will stop automatically if the auto-stop switch is
in the “ON” position. If the switch is in the off position then it will keep revolving all the time.
Lift up the tone arm and put it on the rest when finished.
Replace the protective cap on the stylus and close the tone arm lock.
Turn off power at mains.
USB flash drive and SD card reader Recording
(Lift up the tone arm and put it on the rest.)
LISTEN TO MUSIC:
If you want to play or pause music from your installed SD card or USB flash memory, turn the
power & volume control knob clockwise to power on; the music will start playing automatically.
You can play or pause music by pressing the play-pause/Del button.
If you want to play the next or previous track from your installed SD card or USB flash memory,
press the next track or previous track button.
If you have installed an SD card & USB flash memory, the last one installed will start playing. You
can select the desired source by pushing the MODE/REC button. (SD => USB). The mode button
will select the active/installed sources only. Only mp3 file format is supported.
Note: the tone arm must be in rest position.
RECORDING MUSIC:
You can convert your vinyl records into digital mp3 files by inserting an SD/MMC card in the SD/MMC
card reader slot or USB flash memory device into the USB port.
Play your ‘vinyl’ music, as described in ‘listening to a record’.
Press and hold the MODE/REC button for 2 seconds.
You will hear one ‘short beep’, indicating that recording has started.
When finished recording, press “MODE/REC” for 2 seconds to stop recording.
You will hear 2 ‘short beeps’, indicating that the recording has stopped.
The recorded songs will be saved in the “RECORD0” folder as mp3 file, in 128 kbps.
The file names of the recorded songs will be “REC001L, REC002L, etc”.
You can only switch folders between the “RECORD0” folder and the SD card and/or USB flash
memory by pressing the MODE/REC button (SD/MMC=> SD/MMC record0 => USB => USB record0
=> SD/MMC).
5

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756