Znaleziono w kategoriach:
USER MANUAL
EN-ENGLISH
CA-2DIN7064A
1. How to read this manual
1.1 How to read this manual
This manual contains pictures to illustrate the steps and precautions. The
pictures in this manual are for reference purposes only, please use them
appropriately.
Bookmark
Important precautions markings, these should be read carefully to prevent
fatalities, injuries and other accidents.
Special instructions, additional explanations, reference mark.
Markings with additional information to assist the driver.
Tips: If there are differences between the instructions and the physical
description of a function, the actual function will prevail.
2. Main interface
2.1 Enable / disable navigation
2.2 Starting
When the ignition switch is in the ACC ON position, press the on-screen touch
button to start navigation.
2.3 Switching off
Once the navigation has been started, press the button on the side of
the screen for 2 seconds and it will close.
2.4 Main interface
At start-up, the system will enter the radio interface directly, press the icon
to access the main interface:
1. Swipe lightly on the screen to change the displayed page, press and hold
an icon to move it.
2. In the interface of another function, press the icon to return to the
previous screen.
3. In the other function interface, press the icon to return to the main
screen.
4. Press the icon to see recently opened applications running in the
background.
5. In the main interface, click the icon to access the interface with all
applications.
6. In the top right area of the main interface you can access settings, car
settings, feedback, WLAN, lighting style change, sound functions.
7. In the main interface, press the [off-screen] icon to close the screen, press
anywhere on the screen to turn it back on.
3. Operating the video function
This function can play video files from a USB or built-in hard drive connected
to the device.
1. The device supports video file formats including MPEG, MPG, MP4, 3GP,
MKV, AVI, FLV and so on.
2. If you try to play video files that your device does not support, a message
will appear on the screen telling you that those files cannot be played.
3. In the [main interface] press the [video] icon to enter the following interface,
as shown below:
During video playback, swipe up and down on the left side of the screen to
adjust the brightness, and on the right side you can adjust the volume in the
same way.
4. Warning
For the safety of you, your car and others around you, please make sure you
comply with the following basic requirements:
Before using this device, please read all instructions carefully. Failure to follow
the instructions will void the warranty.
2. For traffic safety and to avoid breaking traffic rules, do not look into the
screen or use it while driving.
3. To avoid a short circuit, do not allow the device to come into contact with
water when it is raining.
4. To avoid a short circuit, do not leave metal objects (such as coins or metal
tools) inside the device.
5. The device cannot be repaired by the user, for repairs please contact a
professional team.
6. When the engine is switched off, do not use the car navigation for a long
period of time, otherwise the car will run out of battery.
7. Never insert objects into ventilation slots or other openings of the device.
8. Do not use sharp objects that could scratch or damage the screen.
5. Boot Logo Operation
In the [all applications] interface press the [Start Logo] icon to access the
operating settings interface. Press the button at the bottom of the screen (set
the Boot Logo) to access the Boot Logo settings.
Note: Only the full screen size of BMP files can set the start logo, number of
colours and BMP colour intensity of 32. Previously, BMP files must be placed
on an external storage device.
Restart operation (optional)
In the [All Applications] interface touch the [Restart] icon to enter the restart
mode of the system interface: Tap OK to restart the system; restart the system
without tapping the Cancel icon.
6. Call functions
6.1 Call functions
In the [main interface] press the [phone] icon to access the following interface:
6.2 Pair and connect
1. When your phone is paired with this device for the first time, follow the steps
below:
Activate the Bluetooth function of your phone.
2. Search for Bluetooth devices from your phone or navigation and connect.
3. A message will be displayed on the phone screen, enter the password
(0000) from your phone, then press (ENT).