Znaleziono w kategoriach:
Ładowarki evse (4)
Wróć
1
Q-Series Manual
english (2) / deutsch (12) / polski (22) / český (32)
2
(English)
Safety Rules
1. DO NOT USE ANY EXTENSION CORDS (electric or type 2)
2. Do not immerse the charger in water.
3. Do not step on, pull, or crush the cord.
4. Do not drop the charger or place heavy objects on top of it.
5. Do not place the charger near a high-temperature object while charging. Do not place
the charger in a car or in a sealed space while charging.
6. Do not use the appliance at temperatures exceeding its operating range of -25°C - 50°C
7. Power to the charger should be provided by a charging socket with a power
corresponding to the power of the charger. The socket should be properly grounded.
8. The electrical circuit should be protected by residual current protection (RCD) and
overcurrent protection selected by an electrician.
9. The appliance contains no maintenance-friendly parts. Do not attempt to repair or
maintain it yourself.
10. Do not use the appliance when it is damaged.
11. Only for charging electric and plug-in hybrid vehicles.
12. Do not use the appliance with an additional extension cord.
13. Do not touch the charging connector.
14. Contact your distributor in case of any problems with use.
General information
Main product features:
• The device has a current regulation and charging scheduling function.
• With WiFi function, you can adjust the charging power and set a charging schedule
via the mobile app.
• Built-in Protections: Over Voltage Protection, Under Voltage Protection, Overload
Protection, Short Circuit Protection, Leakage Protection, Over Temperature
Protection, Surge Protection, Safe and Reliable Product Operation.
•
• Waterproof and dustproof, IP66 protection level, portable design is suitable for
indoor and outdoor use.
• Temperature monitoring: The EV charger will pause charging if any of the
temperature sensors exceed safe values. When the value is lowered, the charger
will start the charging cycle again.
• Automatic error resolution – the EV charger will try to fix errors in the charging
process (e.g. communication with the car) and start charging.
3
EV Charger Components
No
Part
1
AC Plug
2
Avation connector (male) – only for models interchangeable connectors
3
Avation connector (female) – only for models interchangeable connectors
4
Wall mount
5
EV Charger
6
Type 2 Plug
7
Additional connectors depending on the set
Technical details
Phase
1 Phase
1 Phase
3 Phase
3 Phase
3 Phase
Power KWH
3.7KW (Q37)
7.4KW
(Q74)
11KW
(Q11)
22KW
(Q22)
9.6KW
(Q96)
Voltage in
AC 220V
AC 220V
AC 400V
AC 400V
AC 240V
Frequency
50Hz/60Hz
Voltage out
AC 220V
AC 220V
AC 400V
AC 400V
AC 240V
Max Current
16A
32A
16A
32A
40A
Power setup
The plug is equipped with temperature detection and maximum output power
recognition. The current can be adjusted.
Efficiency
≥98%
4
Insulation resistance
≥10MΩ
Power consumption of the
control module
≤7W
RCD
TypeA+DC6 mA
Working temp
-30℃～+50℃
Storage temp
-40℃～+80℃
Max altitude
<2000m
LED
LCD
Screen
2.8 -inch LCD
Communication
WIFI
EV Plug type
Type2, IEC62196-2
Protection class
IP66, IK10
Protection
Over Voltage Protection, Under Voltage Protection, Overload Protection, Short Circuit
Protection, Leakage Protection, Over Temperature Protection, Surge Protection
Power meter
Yes
Cable length
5M / 6M / 7,5M (option)
Weight
Depending on version
Installation
Before installation, please check if the box contains the following items:
• AC EV Charger (Including Cable)*1
• User Manual of AC EV Charger*1
• Wall mount
• Plug mount
• Adapters (option)
Installation Environment Requirements:
• The EV charger is a universal device for indoor and outdoor use, meets the IP66
protection level and can be used outdoors. We highly recommend to keep charger
under rain and snow cover like small roof or cabinet.
• Make sure the ambient temperature is between -30°C and +50°C.
• The installation site must not be higher than 2000 meters above sea level.
• There should be no strong vibration or flammable and explosive materials on the
5
installation site.
• The installation location should not be located in depressions or areas prone to water
accumulation.
• The socket and installation to which the EV charger will be connected must be
consistent with the desired charging power (number of amps, voltage, number of
phases)
• The electrical system must be properly grounded.
Using the charger safely
1. The charger should only be connected to a properly functioning electrical system, i.e. with a
properly functioning ground, phase and neutral. A swapped phase with the neutral wire in
the installation or grounding problems can block the operation of the charger for safety
reasons. This can be changed in charger options.
2. When using charging, use an outlet with a current not less than that set on the charger. If
you are using a socket such as 10A, adjust the current below 10A.
3. Do not place flammable, explosive, or flammable materials, chemicals, flammable steam, and
other hazardous goods near the device.
4. If the charging connector is dirty, wipe it with a clean, dry cloth when the charger is
unplugged. Do not touch the metal pin in the connector with your hands.
5. Do not use the charging cable if it is damaged, worn, cracked, or exposed.
6. Do not attempt to disassemble/repair or reassemble the charging device.
7. Do not use the charger in the event of a lightning storm.
8. Children are not allowed to use the device.
9. It is forbidden to disconnect the charging or power plug while charging.
10. Vehicles are not allowed to drive while charging. Charging can only take place when the
vehicle is stationary.
11. Do not use any kind of extension cords or adapters other than provided by Ampere Point.
How to start charging
1. Insert the plug into the power socket. Make sure the power socket is in accordance with the
national standard and the rated current is min. 16 A.
2. Use the [Current] button to switch the charging current mode. Use the [Clock] button to set
the charging time (charging start delay)
3. Remove the charging plug cover, insert the vehicle connector into the vehicle socket. Make
sure the charging connector is fully inserted.
4. The device will start charging.
How to stop charging
1. Through car settings stop charging, disconnect the charging connector from the vehicle
socket. In some vehicles, the connector unlocks itself when the car is charged.
2. Close the EV charging port and put the protective cap on the charging connector.
3. Disconnect the plug from the power outlet.
Status LED
Lp.
State
LED
Notes