Znaleziono w kategoriach:
ENGLISH
TABLE OF CONTENTS
Please ensure you power down your entire PC before installation.
The LCD module, the pump, and the COMMANDER CORE are sensitive to
hotplugging and ESD.
Note: Most newer PC cases include a CPU cut-out to allow access to the bottom of
the motherboard. If your case does not include a cut-out, you will need to remove your
motherboard from the case prior to installation. ELITE LCD XT coolers come with the
Intel mounting bracket pre-installed on the pump for quick installation.
INTEL (All Sockets)
AMD AM5/AM4
AMD sTRX4
INSTALLATION
FAQ
1
ENGLISH
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
B
H
N
E
K
A
G
M
D
J
P
C
I
O
F
L
ENGLISH
INCLUDED HARDWARE
Highlighted parts for Intel installation only
INTEL
x4 INTEL 1200/1150/1151/1156/1155
STANDOFFS
x4 INTEL 2011/2011-3/2066 STANDOFFS x4 INTEL 1700 STANDOFFS
x1 INTEL BACKPLATE x1 INTEL MOUNTING BRACKET
(PRE-INSTALLED)
x4 THUMBSCREWS
x4 AMD AM5/AM4 STANDOFFS x1 AMD AM5/AM4 MOUNTING BRACKET x1 AMD sTR4/sTRX4
MOUNTING BRACKET
x4 AMD sTR4/sTRX4 STANDOFFS x16 LONG FAN SCREWS (H100i)
x24 LONG FAN SCREWS (H150i/H170i)
x8 RADIATOR SCREWS (H100i)
x12 RADIATOR SCREWS (H150i/H170i)
x8 WASHERS (H100i)
x12 WASHERS (H150i/H170i)
x2 AF RGB ELITE FANS (H100i)
x3 AF RGB ELITE FANS (H150i/H170i)
COMMANDER CORE
USB Y-SPLITTER
2
D
ALGA 1200/1150/
1151/1155/1156
BLGA 2011/
2011-3/2066
CLGA 1700
ENGLISH
1. INSTALLING THE INTEL BACKPLATE
2. INSTALLING THE INTEL STANDOFF SCREWS
Adjust backplate for your required
socket.
Note: Intel LGA 2011/2011-3/2066
do not require backplate installation.
Proceed to step 2.
> Attach the provided Intel standoff
for your socket.
> Use (A) for LGA 1200/115X,
(B) for LGA 2011/2011-3/2066
or (C) for LGA 1700.
> Tighten all four screws until
firmly secured.
ENGLISH
ENGLISH
3
Please continue to Page 10 to continue your installation.
L
M
N
K
F
ENGLISH
3. INSTALL THE FANS AND RADIATOR
Attach the radiator and the fans
as shown. For the best cooling
performance, we recommend
mounting the fans as an air-intake
to your PC case.
4. INSTALLING THE PUMP UNIT
> Align the bracket and pump over the
standoff screws as shown.
> Attach the thumbscrews (F) to the
standoff screws as shown.
> Tighten the thumbscrews until all
four corners are firmly secured.
ENGLISH