Znaleziono w kategoriach:
Klawiatury (3)
Wróć
ENGLISH
ENGLISH
1
A D HE IB C
P Q R
L M N
S
OF JG K
GETTING TO KNOW YOUR KEYBOARD
Charge the keyboard fully before first use by connecting the USB cable (S) to the keyboard USB Type-C port (Q)
and to an available USB 3.0 or better Type-A port on a compatible device including:
A PROFILE KEY
B BRIGHTNESS KEY
C WINDOWS LOCK KEY
D WIRELESS INDICATOR
E ENCRYPTION INDICATOR
F BATTERY INDICATOR
G MACRO INDICATOR
H NUM LOCK INDICATOR
I CAPS LOCK INDICATOR
J SCROLL LOCK INDICATOR
K WINDOWS LOCK INDICATOR
L MEDIA CONTROL KEYS
M MUTE KEY
N VOLUME ROLLER
O MACRO G-KEYS / WIRELESS FN KEYS
P SLIPSTREAM WIRELESS ADAPTER
Q USB TYPE-C PORT
R POWER SWITCH
S USB TYPE-C TO TYPE-A CABLE
BEFORE FIRST USE
Windows® PC Apple Mac®Microsoft Xbox One*
Microsoft Xbox Series X|S*
PlayStation 4**
PlayStation 5**
*Keyboard is compatible out of the box, see corsair.com/xbox-support for details.
**See Connecting to Sony PlayStation section.
K100 AIR comes with ultra-low-profile keycaps that are not designed to be replaced. To avoid potential damage to your keyboard, CORSAIR
recommends not removing the keycaps.
Hold the ESC key while turning the power switch (R) to on, then release the ESC key after two seconds. The
keyboard will then power on normally and be reset to factory defaults.
FACTORY RESET
2
ENGLISH
TIPS AND TRICKS:
• If left on and idle, the keyboard will go to sleep to conserve battery (adjustable in iCUE)
• Reduce brightness or turn off backlighting to extend battery life (and increase charging speed)
• Charge as soon as possible when critically low charge to maximize battery longevity
• Always plug into a USB 3.0 port or better to ensure adequate charging current
The battery indicator (F) will denote charging status when plugged into a compatible device via USB cable.
Upon powering on the keyboard or using the check battery life shortcut below, the battery indicator (F) will denote
current battery charge level.
CHARGING & BATTERY LIFE
1. Plug in the SLIPSTREAM wireless adapter (P) to an available USB 2.0 or better
Type-A port
2. Slide the keyboard power switch (R) to on
3. Switch to SLIPSTREAM wireless mode (see below)
4. After SLIPSTREAM connects automatically, the wireless indicator (D) and
encryption indicator (E) both turn solid white for 3 seconds
NOTE: To complete pairing to a SLIPSTREAM wireless adapter, initiate adapter pairing in iCUE device settings.
CONNECTING VIA SLIPSTREAM WIRELESS
STATUS INDICATION INDICATOR
Fully Charged Solid Green
Charging Blinking Green
SHORTCUT STATUS INDICATION INDICATOR
FN +
Fully Charged Solid Green
High Charge Blinking Green
Medium Charge Blinking Amber
Low Charge Blinking Red
Critically Low Charge Pulsing Red
SHORTCUT FUNCTION STATUS INDICATION INDICATOR
FN + (Press) Switch to SLIPSTREAM
wireless mode
Connected Solid White (3 sec)
Disconnected Pulsing White
ENGLISH
3
1. Initiate Bluetooth pairing on the host device such as a phone or tablet (Bluetooth 4.0 or higher)*
2. Start Bluetooth host pairing on the keyboard, up to three devices can be paired (see below)
3. Input the code from the Bluetooth device screen on the keyboard if requested
4. When pairing completes, the wireless indictor (D) turns solid blue/cyan/magenta for 3 seconds
CONNECTING VIA BLUETOOTH® WIRELESS
NOTE: Wireless modes can be switched to at any time by pressing a wireless shortcut. Pressing the same
shortcut again will switch back to USB wired mode.
CONNECTING VIA USB WIRED
1. Connect the keyboard via USB cable to a USB 3.0 Type-A port or better
2. The keyboard will automatically switch to USB wired mode
3. Go to iCUE device settings to select up to 8,000Hz hyper-polling with
CORSAIR AXON*
*Polling rates higher than 1,000Hz are not support by Xbox or PlayStation consoles.
*Bluetooth host device must support standard keyboard HID input.
SHORTCUT FUNCTION STATUS INDICATION INDICATOR
FN + (Press) Switch to Bluetooth host 1 mode
Connected Solid Blue (3 sec)
Disconnected Pulsing Blue
FN + (Hold) Start Bluetooth host 1 pairing* Pairing Blinking Blue
FN + (Press) Switch to Bluetooth host 2 mode
Connected Solid Cyan (3 sec)
Disconnected Pulsing Cyan
FN + (Hold) Start Bluetooth host 2 pairing* Pairing Blinking Cyan
FN + (Press) Switch to Bluetooth host 3 mode
Connected Solid Magenta (3 sec)
Disconnected Pulsing Magenta
FN + (Hold) Start Bluetooth host 3 pairing* Pairing Blinking Magenta
ENGLISH
4
NOTE: Available functions may be limited depending on gaming console support and application.
The keyboard also has a special mode to support Sony PlayStation 4 and 5 via SLIPSTREAM wireless and USB
wired modes that can be activated via shortcut.
Download iCUE from corsair.com/downloads and install on a Windows PC or Apple Mac
to connect all of your CORSAIR iCUE compatible products together in a single interface,
giving you complete control of everything from lighting to powerful macros.
When iCUE is running the keyboard operates in software mode and is controlled by iCUE.
CONNECTING TO SONY PLAYSTATION
SOFTWARE MODE
When iCUE is not running or the keyboard is connected to a device that does not support iCUE, the keyboard
operates in hardware mode which uses profiles and settings saved to the onboard storage.
With iCUE and AXON Hyper-Processing Technology, you can create as many
custom profiles as can fit onto the 8MB of onboard storage. Each profile can store
complex backlighting effects (up to 20 layers), actions & macros, and settings.*
HARDWARE MODE
* The number of lighting effects layers per profile and total number of profiles that can be saved to onboard storage
will vary based on complexity.
SHORTCUT FUNCTION INDICATION INDICATOR
FN + (Hold for 5 sec) Switch to PlayStation mode Blinks White (5 sec) then Solid White
FN + (Hold for 5 sec) Switch back to standard mode Pulses White (6 sec) (On-key)