Znaleziono w kategoriach:
Prompter ELGATO 10WAD9901

Instrukcja obsługi Prompter ELGATO 10WAD9901

Wróć
عيرسلا ءدبلا ليلد
Quick Start Guide
Guide de prise en main rapide
Kurzanleitung
Guía de inicio rápido
Guida rapida
Snelstartgids
Pikaopas
Lynstart guide
Hurtigveiledning
Kom igång
Guia de Início Rápido
Hızlı Kurulum Rehberi
Σύντομος οδηγός
Skrócona instrukcja
Краткое руководство
イッ
퀵 스트 가이
门指南
入門指南
EN
IT
NO
DE
FI
BR
FR
NL
SV
ES
DK
GR
PL
RU
JA
KO
CN
ZHT
AR
TR
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the us-
er’s authority to operate this equipment. For questions about Elgato product compliance with FCC regulations, please contact:
Compliance Officer, Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA
The declaration of conformity for Elgato products is available at www.elgato.com/doc
Maximum Operation Height: 200 cm | 78.7 in
Rating: 5 VDC, 900 mA
Operation Temperature: 0-60 °C | 32 - 140 °F
Applicant Name (상호명): Corsair Memory, Inc.
Product Name (품명칭): Prompter
Model No.(모델): 20WAD9901
Manufactured Year & Month (조연월): Please refer to gift box sticker
Manufacturer & Origin (제조자 및 제조국): Corsair Memory, Inc./ Please refer to gift box sticker
A/S : (주)컴스빌, 1522-1460
Elgato, a division of:
Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA
Corsair Components Limited, 1020 Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK
Corsair Memory, BV Wormerweg 8, 1311 XB, Almere, Netherlands
Part: 51WAD9901
/elgato
R-R-CSI-20WAD9901
Connecting the Ring BackplateSection 1: Connecting Your Camera
Elgato Prompter includes interchangeable backplates to accommodate different types of cameras/webcams. The goal of
backplates is to block surrounding light on the backside of prompter to prevent glare and to optimally reect Prompter‘s monitor.
Visit https://elgato.com/s/compatbility/prompter to see a list of tested and compatible cameras, camcorders, and webcams
for Elgato Prompter. More backplates may become available to support different webcams and cameras (sold separately).
Visit Elgato.com to see the list of available backplates.
Facecam Pro backplate: For use with Elgato Facecam Pro.
Universal shroud backplate: For other cameras, camcorders, and webcams
that do not meet the criteria for the ring backplate or Facecam Pro backplate.
1. Seat the ring backplate into the back of Prompter. There is a tab at the bot-
tom of the opening to help guide the backplate. Fasten the ring backplate
with the 2 thumbscrews.
2. On your camera, attach the appropriate step-up ring included with
Prompter by screwing it onto the camera lens threads. Camera lenses
with 49, 52, 55, 58, 62, 67, 72, 77, and 82 mm sized threads are compatible
with this setup.
Quick Tip: Check your camera’s lens cap to see its thread size.
3. Once the step up ring is fully screwed on, Elgato Prompter is ready to dock
onto your camera. Line up the rails of the ring backplate with the step-up
ring on the camera, and slide it on until it’s fully seated and secure.
If you are using a short lens, you can use the L-bracket to support stability.
Your Prompter is now ready to be mounted (see Section 2).
Ring backplate: For larger DSLR/Mirrorless cameras or camcorders with
threaded lenses.
Do not use with motorized lenses.
Connecting the Facecam Pro Backplate
2. If Facecam Pro has its monitor mount attached,
remove it before proceeding.
3. Attach Facecam Pro to the camera L bracket using the provided thumb-
screw. Do not tighten it fully.
4. Attach the camera L bracket onto Prompter using the provided thumb-
screw. Do not tighten it fully.
5. Raise the camera L bracket so Facecam Pro is level with the mold of the
Facecam Pro backplate and push the Facecam Pro forward to seat it into
the backplate fully.
6. Once fully seated, tighten the 2 thumbscrews to secure Facecam Pro to
the Facecam Pro bracket and to secure the camera L bracket to Prompter.
Your Prompter is now ready to be mounted (see Section 2).
1. Seat the Facecam Pro backplate into the back of Prompter. There is a tab at
the bottom of the opening to help guide the backplate. Fasten the Facecam
Pro backplate with the 2 thumbscrews.
Connecting the Universal Shroud Backplate
2. Attach the camera to the camera L bracket using the provided thumbscrew.
Do not tighten it fully.
NOTE: The camera must have a ¼“ thread in order to mount it onto the
camera L bracket.
3. After lifting up the shroud for access, attach the camera L bracket onto
Prompter using the provided thumbscrew. Do not tighten it fully.
Drape the shroud over your camera.
4. Lift the camera L bracket so the camera’s lens is centered in Prompter’s
opening. Once centered, fully tighten the camera L bracket to Prompter.
5. Move your camera as far forward as possible without hitting the glass
on Prompter.
NOTE: Certain cameras have lenses that can protrude when zooming.
Ensure that your camera’s lens will not touch Prompter’s glass to prevent
possible damage during use.
6. Once the camera is positioned properly, fully tighten the thumbscrew to
secure the camera onto the camera L bracket.
1. Seat the universal shroud backplate into the back of Prompter. There is a
tab at the bottom of the opening to help guide the backplate. Fasten the
universal shroud backplate with the 2 thumbscrews.
Section 2: Mounting Elgato Prompter
Facecam Pro Backplate
Complete the procedure in Section 1.
Elgato Prompter has multiple mounting points depending on the type of conguration you set up in Section 1.
Ensure that your tripod or other mounting device is able to support the weight of Elgato Prompter and your camera.
Ring Backplate
Complete the procedure in Section 1.
Use the center ¼“ mount on Prompter and screw it
onto your tripod or other mount.
Use the center ¼“ mount on Prompter and screw it
onto your tripod or other mount.
If you are using accessories mounted on Prompter (see Section 3), you might want to use the ¼“ mount located beneath
Prompters display.
Your Prompter is now ready to be mounted (see Section 2).
Universal Shroud Backplate
Complete the procedure in Section 1.
1. Mount your camera or camcorder onto your tripod or mount of choice.
Make sure your ball head is tightened fully and secure.
2. Slide Prompter onto the step-up ring attached to your camera’s lens to dock.
3. Double-check that the ball head is still fully tightened and is able to
support the weight of Prompter and the camera.
If your ball head is unable to support the weight of this setup, you can
use the additional ¼“ mounts found on Prompter with additional acces-
sories to help support the system (see Section 3).
The camera L bracket has multiple thumbscrew rails to accommodate
different types of webcams and cameras (sold seperatly). The left and
right L rails enable you to mount a smartphone clamp so you can use a
smartphone with Elgato Prompter.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756