Znaleziono w kategoriach:
KALEM
Zestaw mebli
Instrukcja montażu
Coee set
Assembly instructions
Zainstaluj wszystkie odpowiednie śruby, ale nie dokręcaj ich
całkowicie na samym początku. Dokręć śruby do oporu, jedna po
drugiej.
Install all the relevant screws,but do not tighten them completely at
the very beginning. Tighten the screws fully one by one.
Nie dokręcaj śruby przed rozpoczęciem
kolejnego montażu podczas instalacji.
Don’t tighten up the screw before you start next
mounting during the in installation.
x2
Zestaw Kalem
Kalem coee set
Przeczytaj i zachowaj poniższe in-
strukcje przed montażem
1. Należy oddzielić i zidentyfikować wszystkie
części, upewniając się, że wymienione elementy
znajdują się w opakowaniu.
2. Aby uniknąć zarysowań podczas montażu, należy
prowadzić prace na miękkiej macie lub innym
bezpiecznym podłożu.
3. Proszę montować krok po kroku i przestrzegać
instrukcji.
4. Należy używać podkładek.
5. Kiedy każda śruba i nakrętka jest prawidłowo
dokręcona, nie należy dokręcać jej nadmiernie.
6. Nie wolno całkowicie dokręcać każdej śruby
i nakrętki dopóki wszystkie wkręty nie są
prawidłowo zamocowane.
Read & save below instructions
before assembly
1. Please separate and identify all parts,
making sure that you have all of the parts
listed.
2. To avoid any scratch during assembly,
please assemble on a soft mat or similar.
3. Please assemble step by step and follow the
instructions.
4. Washers must be used.
5. While each screw and nut is properly
fastened, do not over fasten it.
6. Do not completely fasten each screw and
nut until all the screws are properly fixed.
Esti&Esta 2 /
Montaż krok po kroku / Step by step
1
Ax4 Bx2 Cx6 Dx1
www.everite.de
1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4.WASHERS MUST BE USED.
5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
ASSEMBLY INSTRUCTIONS
SASSARI ALU. K.D.
SINGLE SOFA
Install all the relevant screws,but do not tighten them completely at the very beginning.
Tighten the screws fully one by one.
Don't tighten up the screw before you start next mounting during the
installation.
x1
x1
1x1
2x6
3x1
4x1
5
1
Ax4 Bx2 Cx6 Dx1
www.everite.de
1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4.WASHERS MUST BE USED.
5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
ASSEMBLY INSTRUCTIONS
SASSARI ALU. K.D.
SINGLE SOFA
Install all the relevant screws,but do not tighten them completely at the very beginning.
Tighten the screws fully one by one.
Don't tighten up the screw before you start next mounting during the
installation.
x1
x1
1x1
2x6
3x1
4x1
5
Fotel 1
Single sofa 1
/ 3 Esti&Esta
2
1
2
2
1
2
D
A
C
D
C
B
1
2
Esti&Esta 4 /
3
3
4
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS.
2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT IT CAN BE STORED IN A DRY AREA
WITH A SUITABLE COVER BEFORE STORAGE,PLS ENSURE IT IS CLEAN AND DRY.
3. IN THE EVENT OF BARE METAL SHOWING DUE TO SCRATCH,IT IS PREFERRED TO TREAT WITH A RUST REPELLING VARNISH OR SIMILAR.
4. PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE COMPLETELY TIGHTENED.
5. A MATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
CARE AND CLEANING:
3
3
3
3
3
3
4
5
3
4
/ 5 Esti&Esta