Przystawka KENWOOD Spiralizer KAX700PL

Instrukcja obsługi Przystawka KENWOOD Spiralizer KAX700PL

Wróć
KAX700PL
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
Instrukcja obsługi
instruções
English 2 - 11
Nederlands 12 - 22
Français 23 - 32
Deutsch 33 - 42
Italiano 43 - 52
Português 53 - 62
Español 63 - 73
Dansk 74 - 83
Svenska 84 - 93
Norsk 94 - 103
Suomi 104 - 113
Türkçe 114 - 123
Ïesky 124 - 133
Magyar 134 - 144
Polski 145 - 154
Русский 155 - 166
Қазақша 167 - 175
Ekkgmij 176 - 187
Slovenčina 188 - 197
Українська 198 - 208
Eesti 209 - 218
Lietuvių 219 - 228
Latviešu 229 - 238
´¸∂w
٢٤٨ - ٢٣٩
safety
ORead these instructions carefully and retain for future
reference.
ORemove all packaging and any labels including the protective
film from the cutting blades.
OTake care the cone blades and end of the pusher
blade are very sharp, handle with care.
OSwitch off and wait until the blades have completely stopped
before removing the lid.
OSwitch off and unplug:
Obefore fitting or removing parts;
Owhen not in use;
Obefore cleaning.
ONever use your fingers to push food down the feed tube.
Always use the pusher supplied.
ONever use a damaged attachment. Get it checked or
repaired: see ‘service and customer care’.
ONever leave the appliance on unattended.
OMisuse of your attachment can result in injury.
ONever use an unauthorised attachment.
OOnly use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
ODo not operate your appliance near the edge, or overhanging
the work surface or apply force to the attachment when
fitted, as this may cause the unit to become unstable and tip
over, which may result in injury.
8-10cm
ODo not move or raise the mixer head with an attachment
fitted as the Stand Mixer could become unstable.
2
3
This appliance conforms to EC
Regulation 1935/2004 on materials and
articles intended to come into contact
with food.
This attachment features the Twist
Connection System and is designed
to fit directly on the latest generation
Kenwood Chef models (identified as
TYPE KVC, KVL, KCC, KWL and KCL).
This attachment can also fit KMix
Stand Mixers featuring a slow speed
attachment outlet (TYPE KMX).
To check that this attachment is
compatible with your Stand Mixer you
will need to ensure both components
feature the Twist Connection System
.
If your Stand Mixer features the
Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
before using for the first time
Wash the parts: see ‘care and cleaning’.
key
pusher with support blade
lid with feed tube
cutting cone
Spaghetti (2 x 2 mm)
Linguine (2 x 4 mm)
Tagliatelle (2 x 9 mm)
Flat blade (Pappardelle) - width
of ribbon determined by width of
food
Crinkle cut
cone holder
body
Refer to the “service and customer
care” section to obtain additional cutting
cones.
to assemble your
spiralizer
1 Insert the cone holder into the body
.
2 Fit the desired cutting cone . The lid
cannot be fitted if the cone holder or
cone are not located correctly. Ensure
that the cone sits flush with the holder.
3 Fit the lid and align the on the
lid with the on the body. Turn
clockwise until the aligns with the
.
to use your spiralizer
Before fitting the attachment, remove
the splashguard assembly.
1 Lift off the slow speed outlet cover .
2 With the attachment in the position
shown , locate to the slow speed
outlet and rotate to lock in place.
3 Place a bowl under the cutting cone.
4 Cut the foods to fit the feed tube and
attach to the blade on the end of the
pusher.
5 Place the pusher in the food tube
ensuring the groove on the pusher aligns
with the rib in the feed tube.
6 Switch on to Max and hold the
pusher in position to guide the food
down the feed tube. Do not use
excessive force.
ORefer to your main Stand Mixer instruction book for additional
safety warnings.

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 41 287 500,00 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756