© 2023 MERCUSYS 7107500285 REV1.0.0
Quick Installation Guide
Mobile Wi-Fi
http://www.mercusys.com
For technical support, the user guide and more information, please visit
http://www.mercusys.com/en/support.
CONTENTS
01 / English
05 / Български
09 / Čeština
13 / Eesti
17 / Hrvatski
21 / Қазақша
25 / Latviešu
29 / Lietuvių
33 / Magyar
37 / Polski
41 / Русский язык
45 / Română
49 / Slovenčina
53 / Slovenščina
57 / Srpski jezik
61 / Українська мова
1
English
Note: Images may differ from your actual product.
Quick Start
1. Insert the SIM card. Press and hold the
Power/Wi-Fi button until the LEDs turn on.
2. Connect your wireless device to the Mobile
Wi-Fi using the default SSID and Wireless
Password.
1
2
Wireless Password: XXXXXXXX
SSID: MERCUSYS_XXXX
Wireless Password: XXXXXXXX
SSID: MERCUSYS_XXXX
Enjoy the internet!
Note:
• If you cannot access the internet, refer to FAQ -1.
• By default, Power Saving is enabled and the Mobile Wi-Fi will turn off Wi-Fi when no wireless devices are
connected to it for 10 minutes. To resume the Wi-Fi connection, press the Power/Wi-Fi button.
2
English
2. Launch a web browser and visit
http://mwlogin.net or http://192.168.1.1.
Create a password to log in.
Charging Your Mobile Wi-Fi
• Via a Wall Outlet (Recommended)
5V/1A
• Via a Computer
Managing Your Mobile Wi-Fi
• Via MERCUSYS App
1. Get the MERCUSYS app from App Store or
Google Play, or by scanning the QR code.
2. Launch the app and log in with your
MERCUSYS ID.
Note: If you don’t have an account, create one first.
3. Follow app instructions to set up the Mobile
Wi-Fi.
• Via Web Management Page
1. Connect your wireless device to the Mobile
Wi-Fi. If it is a computer, make sure it is set
to obtain an IP address automatically.
3
English
FAQ (Frequently Asked Questions)
1. What should I do if I cannot access the internet?
A. Log into the web management page (http://mwlogin.net), and check the following:
• Check PIN status
If the current SIM card status is PIN Locked, your SIM card is PIN protected and you need to
unlock it using the PIN code provided by your mobile carrier.
• Verify the mobile carrier parameters
Go to Advanced > Dial-up > Dial-up Settings, then verify that the parameters (i.e. APN, username
and password) provided by your mobile carrier are correct. If they are incorrect, enter the correct
information or create a new profile, then save the settings.
• Check the Data Roaming settings
If your SIM card is operated in a roaming service area, go to Advanced > Dial-up > Dial-up
Settings, enable Data Roaming and save the settings.
• Check Mobile Data
Go to Advanced > Dial-up > Dial-up Settings to verify that Mobile Data is on. If not, enable it and
save the settings.