-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
PLANET
MERCURX/NEPTUNX
SONIC TOOTHBRUSH
PLANET
MERCURX/NEPTUNX
SZCZOTECZKA SONICZNA
EN / PL
Please read the user manual
before use. Keep the manual for
possible future reference.
Przed użyciem zapoznaj się
z instrukcją obsługi. Zachowaj
instrukcję do ewentualnego
wykorzystania w przyszłości.
User Manual
Instrukcja Obsługi
2
3
1 Safety
instructions
Warning:
1. Before connecting the
product to the power supply,
Make sure that your outlet
voltage corresponds to the
voltage stated on the rating
label – 100-240V~,50-60Hz.
2. Do not charge the toothbrush
in damp places.
3. Do not pull the cord when
disconnecting the charger.
Do not touch the cord with
wet hands.
4. If the charger falls into water
during charging, disconnect
the power supply before
taking it out.
5. Do not immerse the tooth-
brush in water at a tempera-
ture above 40º.
6. Do not charge, use or leave
the device if it is exposed
to high temperatures
or environmental factors.
7. The device is not intended for
unattended use by children
or persons with reduced
motor, mental or cognitive
abilities. Keep the device out
of their reach. The product is
not a toy.
8. Children or persons with
reduced motor, mental or
cognitive abilities may only
use the toothbrush under
appropriate supervision.
9. Do not press the toothbrush
against your teeth or gums,
or brush in the same place
for a long time, as this can
damage your gums.
10. Inspect the device thoroughly
before use. Do not use it
if you detect any visible
damage.
11. If you have undergone any
oral surgery or treatment of
your teeth and gums in the
last two months, ask your
dentist if using the toothbrush
is advisable.
2
3
12. The device may cause slight
bleeding of the gums during
the rst days of use. If the
bleeding does not stop within
a week or is unusually heavy,
contact your doctor.
13. Persons with an implanted
cardiac pacemaker or other
electronic device should
consult a doctor before using
the toothbrush.
14. Do not attempt to repair,
modify or disassemble parts
of the device by yourself.
In case of damage, please
contact the customer service
centre.
15. We recommend replacing the
brush head every 3 months
or more often, depending on
the frequency of use.
16. If you use toothpastes
containing brightening or
whitening substances, e.g.
sodium bicarbonate or other
bicarbonates, wash the brush
thoroughly after each use.
17. The device is designed for
brushing teeth, gums and
tongue. Do not use it for any
other purpose. If you feel any
pain or discomfort after using
the toothbrush, or if you
have any concerns about the
impact of the device on your
health, contact your doctor.
The power cord should not
be replaced. If the cord is
damaged the appliance
should not be used.
Electromotive force:
The SEYSSO sonic toothbrush
meets all standards for the
operation of electromagnetic
devices. If used properly and
in accordance with this manual,
it will not pose any danger
to the user.
4
5
2 Toothbrush design
3 Charging before
the rst use:
1. Discharge the toothbrush completely
before the rst charging. Next, charge
the toothbrush until it is fully charged.
The rst charging should last 32
hours. During this time, you can re-
move the toothbrush from the charger
to clean your teeth.
2. A LED ring on the toothbrush
ashes in four dierent colors during
charging. The LED ring goes out 2
minutes after the toothbrush is fully
charged.
3. Each subsequent recharging should
last 32 hours or until the LED ring
goes out.
ATTENTION: Switch o the toothbrush
before the rst charging. Place the
charging base on a at and stable
surface and align the slot on the bottom
of the toothbrush with the locking pin of
the charging base. Place the toothbrush
on the charging base and connect the
plug to a power outlet.
ATTENTION: Before charging, make
sure that the output current specication
is compatible with 100-240 V AC 50
Hz/60 Hz 1.4 W. Otherwise, do not
connect the charger to the power supply.
Step 1: Attach the replaceable head
to the hand grip.
* The diagram shows the correct way
to attach the head to the toothbrush
Step 2: Next, apply an appropriate
amount of toothpaste to the bristles of
the toothbrush. We recommend using
toothpaste dedicated to sonic brushes
(Sonic Friendly). We recommend the
SEYSSO toothpastes which, thanks to
their excellent ingredients and texture,
fully utilise the potential of sonic
toothbrushes.
Step 3: Put the head into your mouth
before switching on the toothbrush.
Position the toothbrush near your teeth
so that its bristles are at a 45-degree
angle to your gum line and switch on
the toothbrush by pressing and holding
the function button for 3 seconds.
Step 4: Briey press the function
button while the toothbrush is running
to select the appropriate brushing
mode. Each time you press the button,
the device switches between the four
programs in sequence and changes
the colour of the LED ring.
4 Brushing:
Hand grip
Cap
Brush head
Mode LED ring
color
Symbol
on the
toothbrush Function
Clean Yellow C Teeth
cleaning
White Blue W Teeth
whitening
Polish Red P Polishing
front teeth
Massage Green M
Gum
massage
and teeth
cleaning
4
5
2 Toothbrush design
3 Charging before
the rst use:
1. Discharge the toothbrush completely
before the rst charging. Next, charge
the toothbrush until it is fully charged.
The rst charging should last 32
hours. During this time, you can re-
move the toothbrush from the charger
to clean your teeth.
2. A LED ring on the toothbrush
ashes in four dierent colors during
charging. The LED ring goes out 2
minutes after the toothbrush is fully
charged.
3. Each subsequent recharging should
last 32 hours or until the LED ring
goes out.
ATTENTION: Switch o the toothbrush
before the rst charging. Place the
charging base on a at and stable
surface and align the slot on the bottom
of the toothbrush with the locking pin of
the charging base. Place the toothbrush
on the charging base and connect the
plug to a power outlet.
ATTENTION: Before charging, make
sure that the output current specication
is compatible with 100-240 V AC 50
Hz/60 Hz 1.4 W. Otherwise, do not
connect the charger to the power supply.
Step 1: Attach the replaceable head
to the hand grip.
* The diagram shows the correct way
to attach the head to the toothbrush
Step 2: Next, apply an appropriate
amount of toothpaste to the bristles of
the toothbrush. We recommend using
toothpaste dedicated to sonic brushes
(Sonic Friendly). We recommend the
SEYSSO toothpastes which, thanks to
their excellent ingredients and texture,
fully utilise the potential of sonic
toothbrushes.
Step 3: Put the head into your mouth
before switching on the toothbrush.
Position the toothbrush near your teeth
so that its bristles are at a 45-degree
angle to your gum line and switch on
the toothbrush by pressing and holding
the function button for 3 seconds.
Step 4: Briey press the function
button while the toothbrush is running
to select the appropriate brushing
mode. Each time you press the button,
the device switches between the four
programs in sequence and changes
the colour of the LED ring.
4 Brushing:
Mode LED ring
color
Symbol
on the
toothbrush Function
Clean Yellow C Teeth
cleaning
White Blue W Teeth
whitening
Polish Red P Polishing
front teeth
Massage Green M
Gum
massage
and teeth
cleaning
