Znaleziono w kategoriach:
Frytkownice (27)
Wróć
Instrukcja obsługi Air Fryer Frytkownica beztłuszczowa TEFAL EY7568E0 Easy Fry Stack 10l z podwójnym koszem
2
DRAWER 2 (6L)
(LARGE BOWL)
LARGE
REMOVABLE
GRID WITH
SILICON PADS
TIME/
TEMPERATURE
DISPLAY
REMOVABLE
GRID WITH
SILICON PADS
LEVEL
RACK X 2
STORAGE
LID X 2
DRAWER
HANDLES
DIGITAL
TOUCHSCREEN
PANEL
* depending on model
DRAWER 1 (4L)
(REGULAR
BOWL)
DETACHABLE
FRONT
PANEL*
*
en
3
USER INTERFACE
AUTOMATIC COOKING MODES
Fries Chicken Vegetables Fish
Dessert Prove Manual mode
BEFORE FIRST USE
1Remove all packaging material and any stickers from the appliance.
2 Place the cord rack on the back of the appliance. The cord rack must be installed
correctly before first use.
OFF : indicates the drawer is off. To activate, click on 1 or 2 buttons.
Preset cooking
programs
: Lights up to shake
food during fries
program.
Manual
program
: To activate
the cooking
synchronisation
Temperature &
cooking time
settings
BUTTON 1:
To activate drawer 1 BUTTON 2:
To activate
drawer 2
Start / Stop
cooking
en
4
3 Thoroughly clean the drawers and removable grids with hot water, some
washing-up liquid and a non-abrasive sponge.
The drawers and the grids are dishwasher safe.
4Wipe the inside and outside of the appliance with a damp cloth. The appliance
works by producing hot air. Do not fill the drawer with oil or frying fat.
PREPARING FOR USE
1 Place the appliance on a flat, stable, heat-resistant work surface away from
water splashes.
2 Do not fill the drawer with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and
affects the hot air frying result.
IMPORTANT: To prevent the appliance from overheating, do not place it in a
corner or below a wall cupboard. A gap of at least 15cm should be left around
the appliance to allow air to circulate.
3
Connect the power supply cord to an electrical socket, ensuring that the
voltage matches the voltage indicated on the rating plate. Be careful when
using the appliance.
4 Press to power on the appliance. Fries mode is displayed as default for
drawer 1 while OFF is displayed on the screen for drawer 2.
5 Any drawer can be activated for selection by pressing ‘1’ or ‘2’ button. (To cancel
the selection, press again ‘1’ or ‘2’ button, the drawer will be OFF and cancelled).
Note: Never exceed the maximum amount indicated in the table (see
section ‘Cooking Guide’), as this could affect the quality of the end result.
6 Always place the suitable grids in the drawers before cooking for optimal
cooking results.
USING BOTH DRAWERS ON SYNCHRONISATION MODE
(DUAL COOKING)
Cook 2 different types of food at the same time thanks to both drawers and SYNC
Mode.
1 Press to switch on the appliance. Fries mode is displayed as default for
drawer 1 while OFF is displayed on the screen for drawer 2.
2Press the desired cooking mode and adjust timing and temperature if different
to the pre-set settings (by pressing + and -) The settings are saved.
en
5
3Place your first food in the drawer 1 (top drawer). Slide the drawer back into the
appliance.
4To activate drawer 2, press ‘2’.
5Press the second desired cooking mode and adjust timing and temperature if
different to the pre-set settings (by pressing + and -).
6Place your second food in the drawer 2 (bottom drawer). Slide the drawer back
into the appliance.
7Press in order to get the two foods ready at the same time. If the two
cooking modes selected have different cooking times, ‘HOLD’ appears on the
screen for the shortest cooking mode (for the food which needs less time to
cook). It means the appliance delays the cooking launch in order to have the
two types of food ready at the same time.
8Press to begin cooking.
9The appliance beeps when the food is ready, at the same time.
10 When the food is cooked, take out the drawer. To remove food, use a pair of
tongs to lift the food out of the drawer.
Caution: After hot frying, the grids and the food are very hot.
Note: During cooking, if you remove one of the drawers and you do not
slide it back within 5 minutes, this drawer panel will display ‘OFF’. The
other drawer keeps running, but it ends ‘SYNC’ program.
USING ONLY ONE DRAWER OF THE APPLIANCE
1Press to switch on the appliance.
2Fries mode is displayed as default for drawer 1 while OFF is displayed on the screen
for drawer 2.
3Any drawer can be activated by pressing ‘1’ or ‘2’ button. The other drawer
remains OFF (To cancel the selection, press again ‘1’ or ‘2’ button).
4To begin cooking, you can select between the preset cooking mode or the manual
settings.
a. If choosing preset cooking mode:
• Select the desired cooking mode by pressing the icon corresponding on the
touchscreen panel (these modes are described in detail in the “Cooking guide”
section).