Znaleziono w kategoriach:
Nianie elektroniczne (11)
Wróć
2
EN – MANUAL
BOX CONTENTS
−Camera (baby unit)
− USB-C cable + adapter
−Flexible holder
−Reset pin
CAMERA DESCRIPTION
9
10
8
2
3
6
1
5
7
11
4
1. Input for microSD card
2. Reset button
3. Infrared diode for night vision
4. Microphone
5. Camera lens
6. Status LED
a. Red LED – camera starting
b. Blue LED (blinking) – waiting for pairing
c. Blue LED (steady) – camera connected
7. Night light
8. USB-C input
9. Thread for cot mount (also compatible with the
TrueLife NannyCam Holder)
10. Speaker
11. Temperature sensor
CAMERA PLACEMENT
Option 1: on a horizontal and solid surface
Option 2: for a tripod thread
a. Wrap and secure the exible holder to the chosen location.
b. Screw the camera onto the thread.
2 3
PAIRING WITH THE APP
Plug the USB-C power cable into the camera and the adapter into a power
outlet. The camera will automatically turn on.
1. Download the app
Scan the QR code or enter the URL: truelife.eu/57714/app
2. Register or log in with an existing account
a) Signing up
1. If you don‘t have an account in the app yet, register by pressing Sign Up. Select your country/
region and ll in your email address. Carefully read the Privacy Policy and check the I agree box.
2. Next, select Get Verication Code and copy the six-digit code that you receive in your email inbox.
3. Now set your password (6-20 characters with a combination of letters and numbers) and press
Go to App.
Note: The code is only valid for 60 seconds. If you have not completed it by then, press Resend and
ll in the code again. If you do not receive the code, check the spam folder in your email inbox.
b) Logging in with an existing account
1. If you already have an account in the app, press Log In. Select your country/region, ll in your email
address, enter your password, and press Log In.
Adding a device to the app
1. In the app, press Add Device.
2. In the left column, select Baby monitor and press TrueLife NannyCam S3 Smart.
3. In the app, conrm that the camera LED is ashing and press Next. Select your home Wi-Fi (2.4GHz),
enter the password for this Wi-Fi, and press Next again.
Note: The app requires location access to pair properly.
4. Hold the QR code in front of the camera lens at a distance of 15 to 20 cm. When pairing is success-
ful, you will hear a beep and the camera‘s status LED will ash blue. Press I heard a prompt button
and wait until the pairing is complete, as shown in the app.
5. When it is complete, press Done. Now, the camera is ready for use.
Alternative pairing procedure
In the app, select Add Device. In the left column, choose Security & Video Surveillance and then
select Smart Camera (Wi-Fi). In the top right corner, click on QR Code for Camera and then select
EZ Mode. Even though there isn‘t an LED indicator on the camera, check the box Make sure the
indicator is ashing quickly. Select Wi-Fi (2.4 GHz), enter the password for that Wi-Fi, and press Next
and wait for the camera to pair. When the pairing is successful, the audio signal „Connect router“,
„Connect internet“ and „Add device success“ will be heard. When nished, select Done. The camera
is now ready to use.
Video tutorial for pairing methods
Scan the QR code or enter the URL:
truelife.eu/00047/pair
TAKING PHOTOS
AND
VIDEOS
A microSD card (not included) is required to take photos or videos. The card must be formatted
in FAT32 format for proper functionality. The maximum supported card size is 128 GB and we re-
4
commend using a microSD card of at least Class 10 / UHS-1. If you insert a microSD card into the
camera, the recording is controlled via the app and will be recorded to your phone gallery and to
the card at the same time.
TROUBLESHOOTING
Problem Solution
Camera does not pair with
the mobile app.
Make sure the camera is connecting to the correct WiFi
network. The camera does not support 5 GHz, only 2.4 GHz.
If you are still unable to pair, uninstall the app, reboot your
phone and camera, and do it all over again as instructed.
The camera won‘t load the QR code
in the mobile app when pairing.
Check and perform all of the solutions for „Camera does
not pair with the mobile app“. If the camera still does
not read the QR code in the mobile app, please switch to
„EZ mode“ pairing type. In the app, after selecting your
product to pair, switch from „QR Code for Camera“ to „EZ
Mode“ in the top right corner and proceed to the next
steps. Keep your mobile phone close to the camera to pair
together without retrieving the QR code.
I am not receiving notications
on my mobile phone.
Make sure the app is running and has been granted the
appropriate permissions in settings (to send notications).
SECURITY AGAINST HACKING
The application uses ve-layer security technology to ensure the security of smart devices without
the risk of information leakage through military-grade AES data encryption, triple-check authorizati-
on and authentication, two-code dynamic key, https channel encryption and https channel encryp-
tion to ensure the security of network transmission.
Note: To increase protection against hacking, set the strongest possible password on your WiFi
network. The password should consist of at least eight characters with a combination of upper and
lower case letters and numbers. Do not use the special characters „~!@#$%^*-“ or the camera will
not be paired.
MAIN FUNCTIONS OF THE APP
Switch to full screen
Take screenshot (saved to the phone gallery)
Pressing will make the call two-way until you turn the button o again
Note: Setting basic functions -> Audio mode.
For two-way communication, we do not recommend having the camera and mobile device in the
same room, which may trigger audio feedback (whistling sound from the camera).
Capture video (saved in the phone gallery)
Play recording from a microSD card – in addition to the phone gallery, you can also save
recordings to the microSD card.
4 5
Note: Insert the card into the switched-o camera into the input under the optics (see the CAMERA
DESCRIPTION chapter, point 5) and format the card in the settings before recording. In the settings,
you can also choose whether the camera will record to the card constantly or only when motion is
detected.
View gallery of pictures and videos taken on the phone
Set light or dark app theme
Private mode to stop image sharing between other devices
Night vision settings
Note: When set to Auto, the camera automatically switches to night vision mode when it gets dark
and the image switches to black and white.
Remove glare and ickering of lights captured by the camera
Adjust camera volume
Motion detection – when motion is detected, it sends a notication to the mobile phone
and takes a picture that can be viewed when the notication is clicked
Note: Under the „Area of activity“ setting, you can set the parts of the image that will be monitored
and for which you will receive notications. To adjust, drag or resize the red frame by dragging only
the corners of the frame.
Sound detection – sends a notication to the mobile phone when sound detected
Temperature settings – sends a notication to your mobile phone when the upper and
lower temperature limits you set are recorded
Note: To see motion, sound and temperature detection notications, make sure you have enabled
app notications in your phone settings. Temperature detection only works with the original cable
with the temperature sensor on it.
Turn night light on / o
Turn on lullaby
SPECIFICATIONS
Viewing angle 100°
Automatic night vision Yes (visibility up to 5 m)
Video format MP4, H.264 compression
WiFi 2.4 GHz (range up to 15 metres – camera -> router)
Video resolution Full HD 1080P (1920×1080 15 fps)
VGA (640×360 15 fps)
Max. microSD card capacity 128 GB
Power input USB-C
Power consumption 5 V, 1 A