Znaleziono w kategoriach:
3
3
EN – USER MANUAL
BOX CONTENTS
−Brush body
− 1× Standard head, 1× Sensitive head,
1× Whiten head
−Charging base
−Adapter
−Travel case
−Manual and safety instructions
PRODUCT DESCRIPTION
7
1
2
9
8
6
5
3
4
1. Replaceable sonic toothbrush head
2. Sonic toothbrush handle
3. Power and mode select button
4. Intensity button
5. Mode indicator
6. Charging indicator
7. Travel case
8. Charging base
9. UV sterilizer
4
INSTRUCTIONS FOR USE
1. Place the brush head on the handle.
2. Moisten the head and apply toothpaste.
3. Place the head with the bristles on the teeth towards the gums.
4. Switch the toothbrush on with the power button.
5. To select a mode, press the mode change button within 5 seconds of switching
on the toothbrush, otherwise the toothbrush will switch o. Choose one of the
three modes:
−CLEAN – Basic mode for perfectly clean teeth
−WHITEN – Cleaning and polishing to whiten your teeth
−MASSAGE – Vibrations for gentle stimulation of the gums
6. You can choose between 5 intensity levels for each mode. Switch between them
using the intensity button.
7. Move the bristles back and forth across the teeth, moving slowly between each
tooth. At the same time, gently push the brush towards the teeth.
8. For maximum eciency, divide brushing into 4 sections. Spend 30 seconds on
each section. After each 30-second cycle, the brush will pause and alert you to
move on to the next section. After 2 minutes, the brush will turn itself o.
9. Rinse the brush head and handle under running water and then wipe them with
a cloth or towel.
10. Put the handle back in the base or in the travel case. Place the head in the UV
sterilizer.
UV Sterilizer
1. Use the button to open the UV sterilizer lid.
2. Place the toothbrush head in the UV sterilizer. The bristles should point towards
the UV lamp.
3. Close the lid. Sterilization will start automatically. Do not open the lid during ste-
rilization.
4. Once the UV light goes out, open the lid and remove the head.
Please note: The bristles of the toothbrush head can be slightly damp when inserted.
However, water must not be dripping from the toothbrush at any time.
CHARGING
The sonic toothbrush is equipped with a contactless charging system. Therefore, no
direct connection to the power cord is required. This makes charging more conve-
nient and safer. For a full charge, the toothbrush must be left to charge for appro-
ximately 24 hours.
1. When the charging indicator turns red, the toothbrush needs to be charged.
2. Connect the charging base to the adapter and then to a power source.
3. Insert the switched-o toothbrush into the charging base. The charging indicator
lights red throughout the charging process. Once the toothbrush is charged, the
charging indicator lights green.
5
Recommendation: In order to maintain optimal battery life of the toothbrush, it is re-
commended to charge it at regular intervals (e.g. after 2-3 weeks).
Please note: The charging base and toothbrush may become slightly warm whilst char-
ging.
MAINTENANCE
Before cleaning, make sure that the device is not plugged in.
Charging base:
Wipe dirt from the charging base with a soft cloth. Do not immerse the charging
base in water.
Toothbrush:
1. Remove the brush head.
2. Wipe dirt from all surfaces with a soft cloth and return the brush. Do not immerse
the handle of the brush in water.
3. Rinse the head and its bristles after each use.
4. Do not wash the brush or its parts in the dishwasher.
Travel case:
Wipe the surface and interior of the travel case with a damp cloth.
Recommendation: For reasons of hygiene, we recommend changing the brush heads
regularly after 3–4 months.
SPECIFICATIONS
Material ABS/TPE
Brush voltage input 3.7 V
Brush power consumption 1.7 W
Base voltage input 12 V
Base power consumption 3.4 W
Battery capacity 700 mAh
Water resistance IPx7
Brush weight 122 g
Brush dimensions 27×27×257 mm
Base weight 175 g
Base dimensions 133×57×132 mm